AMF Super Cross Grain Sheeter User manual

• Stainless steel construction
• 100 + pieces per minutes
• Reliable performance
SUPER ‘’S’’
CROSS GRAIN
SHEETER/MOULDER/PANNER
Shown with optional
Dough Spacer
Shown with optional
Handtwist Table

SUPER ‘’S’’ CROSS GRAIN SHEETER/MOULDER/PANNER
Sheeter Section
• Stainless steel construction.
•Slanted infeed conveyor with Teflon®
coated dough guides.
•Adjustable flattener roll.
•Removable D.C. variable speed stainless steel flour
sifter with automatic cut-off. (optional A.C.)
Shown with optional new larger dough spacer.
Moulder Section
• High speed transfer conveyor.
•Fully adjustable plow and curling mat.
•Smooth high speed transfer of product.
•Delrin transfer plate *Super “S” users have confirmed
speeds of 120 LPM for prolonged periods of time.
Above shown with high speed transfer conveyor.
• Stainless steel motorized pressure board.
•Air operated lifting device
(optional shown left) permits:
- Rapid change over of dough guides.
- Easier access for sanitation and maintenance
purposes.
•Easily adjustable pan guides.
FLOUR SIFTER 28"
30-1/2"
MOULDER PANNER
MAKE-UP BELT HAND TWIST TABLE
HAND TWIST TABLE
TRANSFER BELT
2" CLEARANCE
PANNER
SHEETER
NEW LARGER DOUGH SPACER
7'-2"
8'-7"
22-3/4"
24-1/4"
6-1/4"
• STAINLESS STEEL CONSTRUCTION
• EQUIPMENT MEETS OSHA REQUIREMENTS
• WORKING RANGE: 6 OZ. TO 36 OZ. / 7" TO 19"
RH MACHINE SHOWN

•Stainless steel frame and table.
•Polytek SP93F (20" wide) conveyor belt.
•Mechanical variable speed 3/4 H.P. TEFC motor with
reducer 10:1.
•Adjustable flattener roll with bakery roller compound
#747 sleeve.
•Driven U.H.M.W. panning rollers.
•Adjustable dough dropping mechanism.
•Magnetic pan indexer is A.C. driven 1-1/2 H.P. TEFC
motor with Horton clutch and brake.
•A.C. drive on twist table belt (optional).
• Magnetic pan indexer (belt type)
- Center magna rail design.
- Adjustable mold sensor.
- Motor SEW Eurodrive 3/4 H.P. with brake.
•Magnetic pan indexer (chain type)
- Replaceable magnet plates.
- Horton clutch and brake.
- Adjustable mold sensor.
Optional hand twist table shown (not in operating position). Optional hand twist table shown (in operating position).
SUPER ‘’S’’ CROSS GRAIN SHEETER/MOULDER/PANNER
Hand twist table
OR
Pan indexers

Moulder / Panner
section
•Special transfer conveyor with Delrin transfer plate,
fully adjustable stainless steel plow and curling mat.
•D.C. variable speed removable flour sifter.
•Motorized pressure board, adjustable at both ends,
with floating action (19" wide).
•U.H.M.W. adjustable dough guides with stainless
steel backing and numeric graduation.
•Polytech SP93F moulder make-up belt (20" wide 168
FPM).
•Adjustable pan guides.
•Dual strand plastic table-top pan conveyor.
• Magnetic pan indexer.
•Stainless steel sliding catch pan.
SUPER ‘’S’’ CROSS GRAIN SHEETER/MOULDER/PANNER
For more information please call
your Account Manager or 1-800-BAKERS-1.
Headquarters
AMF Bakery Systems
2115 West Laburnum Avenue
Richmond, Virginia 23227
1-800-225-3771 or 804-355-7961
FAX: [phone]
www.amfbakery.com [e-mail]
European operation
West Park Ring Road
Leeds LS16 6QQ England
Tel.: [phone]
Fax: [phone]
06/2001
22-N-AA
AMF’s continuing engineering is constantly improving product performance. Consequently machinery specifications are subject to change without notice.
•Special slanted infeed conveyor with Teflon® coated
dough guides and adjustable flattener roller
(Elev. 61'' ± 1''). Infeed conveyor speed 160 FPM.
•D.C. variable speed, removable st. st. flour siflers with
automatic cut-off.
•Adjustable top and bottom sheeting rolls are 17 » wide.
•Baker Teflon® coated sheeting roll scrappers.
•Sheeting rolls 17'' wide adjustable.
•Top sheeting roll is grooved to prevent dough
hesitation.
•Sheeting rolls driven by a 2 H.P. motor.
- Top: 320 RPM
- Bottom: 400 RPM
•Sheeter belt 14" wide SP93F polytek endless.
- Mechanical variable speed
- Elevation 38" ± 1''
•Sheeting rolls guard (Lexan®) with safety switches.
•Stainless steel removable panels with safety switches.
•Adjustable legs.
•Stainless steel sliding catch pan.
•Pressure board with air operated lifting device.
•Third set of sheeting rollers for high speed
performance and specialty doughs.
• Complete set of inserts style adjustable U.H.M.W.
dough guides (1/2", 3/4", 1", 1-1/4").
• A.C. inverters on the following:
- Sheeting rolls
- Sheeter belt (speed 295 to 700 FPM)
- Transfer belt (speed 113 to 342 FPM)
- Moulder make-up belt (speed 84 FPM to 252 FPM)
- Pan conveyor:
- Table-top (60 to 180 FPM)
- Magnetic (80 FPM)
- Flour sifters
•Remote, combined master control panel for
2 or 3 moulders.
• Nema 4 remote control panel mounted under moulder
frame with the following:
- Allen Bradley starters
- D.C. controls for flour dusters
- Main disconnect switch
- Relays, terminal block, wiring
• Nema 4 operator panel mounted to moulder frame with
the following:
- Allen Bradley push-buttons and alarm
message display
- Potentiometers for flour sifters
- Safeties
- Emergency stop
•CAD electrical drawings.
Sheeter Section
Electrical
Specifications
Options