AMQ TIZU User manual

TIZU assembly instructions

TIZU ASSEMBLY INSTRUCTIONS | 2
Legs Box A: Seat rest/Arm Box B: Castors Box C: HardwareBackrests
Components
TIZU ships in boxes of two, so all components are x2.
Tools Required
Allen Keys: 4mm and 6mm
Phillips Head Screw Driver
Rubber Mallett
Bag: Seat Cover
TIZU
assemblyINSTRUCTIONS
MAX
250 lbs

TIZU ASSEMBLY INSTRUCTIONS | 3
TIZU
assemblyINSTRUCTIONS
Step 1
Insert the castors into bottom of each leg.
Step 2
Attach the backrest to the top of leg frame.
Gently tap arms into place with mallett.
Note: You may choose to start with installing the seat cover – instructions on last page.
Step 3
1. Using the M6X20 bolts, attach the armrest
to the backrest.
2. Using the M8X35 bolts, attach the armrest
into the leg assembly.
Step 4
Insert bushing into seat bracket, and the seat
bracket into cantilever.
1
2

TIZU ASSEMBLY INSTRUCTIONS | 4
Step 6
Slide in lumbar support piece.
Step 5
Tighten seat with M6X30 bolts.
TIZU
assemblyINSTRUCTIONS

TIZU ASSEMBLY INSTRUCTIONS | 5
Installing Removable Seat Covers
Step 1
Place seat cover over the seat cushion and seat cover
lining that is already in place.
Step 2
Locate the zipper pull and pull around the seat until it meets the other end of the zipper.
Step 3
Once fully zipped, cover is in place.
Push seat down and chair is ready to use.
TIZU
assemblyINSTRUCTIONS