AMQ Amobi Team Wall User manual

Amobi Team assembly guide

AMOBI TEAM ASSEMBLY GUIDE | 2 amqsolutions.com
Amobi Team Wall
Components.............................3
Frame Assembly .........................4
Collaboration Board Installation..............6
Amobi Team Half Wall
Components.............................7
Frame Assembly .........................8
Collaboration Board Installation.............10
Amobi Team Half Wall with Storage
Components............................11
Frame Assembly ........................12
Collaboration Board Installation.............14
Amobi Team Display
Components............................15
Frame Assembly ........................16
Shelf Installation .........................18
Amobi Team Display with Storage
Components............................21
Frame Assembly ........................22
Shelf Installation .........................24
Amobi Team Cart
Components............................27
Cart Assembly ..........................28
Amobi Team Cart with Storage
Components............................29
Cart Assembly ..........................30
CONTENTS

AMOBI TEAM ASSEMBLY GUIDE | 3 amqsolutions.com
AMOBI TEAM WALL
COMPONENTS
4
Allen
4mm
10mm
4mm
M6 x 10

AMOBI TEAM ASSEMBLY GUIDE | 4 amqsolutions.com
FRAME ASSEMBLY
Step 1
Insert castors into each slot and flip the lower frame upright.
Step 2
Lock castors. With 2 people, align
and insert the upper frame into the
top of the lower frame. Tightly screw
in (2) M6x10 screws on each side.
x4
x4
x2
*Torque setting of 5 to 7 Nm is
recommended when using a power tool
4
Allen
4mm
10mm
M6 x 10

AMOBI TEAM ASSEMBLY GUIDE | 5 amqsolutions.com
FRAME ASSEMBLY
Step 3
Angle the rail hooks into vertical beam slots and push down to snap onto the vertical beam.
Slot the other end of the rail into the vertical beam and push down to snap.
1
2
3
x2
7th slot from the top
top slot

AMOBI TEAM ASSEMBLY GUIDE | 6 amqsolutions.com
COLLABORATION BOARD INSTALLATION
Step 1
Slide collaboration board
against middle of frame.
Securing Collaboration Boards
Place corner brackets on each upper corner.
Push button to lock bracket and rotate lever
to secure board.
Removing Collaboration Boards
Push button on bracket to release
lock and rotate levers downwards
to remove board.
x4
x4
x4
x4

AMOBI TEAM ASSEMBLY GUIDE | 7 amqsolutions.com
AMOBI TEAM HALF WALL
COMPONENTS
4
Allen
4mm
10mm
4mm
M6 x 10

AMOBI TEAM ASSEMBLY GUIDE | 8 amqsolutions.com
FRAME ASSEMBLY
Step 2
Lock castors. With two people, align
and insert the upper frame into the
top of the lower frame. Tightly screw
in (2) M6x10 screws on each side.
x4
Step 1
Insert castors into each slot and flip the lower frame upright.
x4
x2
*Torque setting of 5 to 7 Nm is
recommended when using a power tool
4
Allen
4mm
10mm
M6 x 10

AMOBI TEAM ASSEMBLY GUIDE | 9 amqsolutions.com
FRAME ASSEMBLY
Step 3
Angle the rail hooks into vertical beam slots and push down to snap onto the vertical beam.
Slot the other end of the rail into the vertical beam and push down to snap.
7th slot from the top
top slot
1
2
3
x2

AMOBI TEAM ASSEMBLY GUIDE | 10 amqsolutions.com
COLLABORATION BOARD INSTALLATION
x4
Step 1
Insert collaboration board
behind quick release lever.
x4
Securing Collaboration Boards
Place corner brackets on each upper corner.
Push button to lock bracket secure board.
Removing Collaboration Boards
Push button on bracket to release
lock and rotate levers downwards
to remove board.

AMOBI TEAM ASSEMBLY GUIDE | 11 amqsolutions.com
AMOBI TEAM HALF WALL WITH STORAGE
COMPONENTS
4
Allen
4mm
10mm
4mm
M6 x 10

AMOBI TEAM ASSEMBLY GUIDE | 12 amqsolutions.com
FRAME ASSEMBLY
Step 2
Lock castors. With two people, align
and insert the upper frame into the
top of the lower frame. Tightly screw
in (2) M6x10 screws on each side.
Step 1
Insert castors into each slot and flip the lower frame upright.
x4
x2
x4
*Torque setting of 5 to 7 Nm is
recommended when using a power tool
4
Allen
4mm
10mm
M6 x 10

AMOBI TEAM ASSEMBLY GUIDE | 13 amqsolutions.com
FRAME ASSEMBLY
Step 3
Angle the rail hooks into vertical beam slots and push down to snap onto the vertical beam.
Slot the other end of the rail into the vertical beam and push down to snap.
7th slot from the top
top slot
1
2
3
x2

AMOBI TEAM ASSEMBLY GUIDE | 14 amqsolutions.com
COLLABORATION BOARD INSTALLATION
Step 1
Insert collaboration board
behind quick release lever.
x4 x4
Securing Collaboration Boards
Place corner brackets on each upper corner.
Push button to lock bracket secure board.
Removing Collaboration Boards
Push button on bracket to release
lock and free board.

AMOBI TEAM ASSEMBLY GUIDE | 15 amqsolutions.com
AMOBI TEAM DISPLAY
COMPONENTS
19
M6 x 12
Allen
4mm
10mm
4mm
8
M6 x 15
Tapping Screw
15mm

AMOBI TEAM ASSEMBLY GUIDE | 16 amqsolutions.com
FRAME ASSEMBLY
Step 2
Lock castors. With two people, align
and insert the upper frame into the
top of the lower frame.
Step 1
Insert castors into each slot and flip the lower frame upright.
x4

AMOBI TEAM ASSEMBLY GUIDE | 17 amqsolutions.com
FRAME ASSEMBLY
Step 3
Mount L-brackets onto frame using (8) M6x12 screws on each side.
*Torque setting of 5 to 7 Nm is
recommended when using a power tool
x2
16
Allen
4mm
M6 x 12
12mm

AMOBI TEAM ASSEMBLY GUIDE | 18 amqsolutions.com
SHELF INSTALLATION
Step 2
Use mallet to mount shelf firmly onto supporting bar.
Step 1
Insert lower rail first. Angle the rail hooks into the
vertical beam slots and push down to snap onto
the vertical beam. Slot the other end of the rail
into the vertical beam and push down to snap.
1
2
3
7th slot from the top

AMOBI TEAM ASSEMBLY GUIDE | 19 amqsolutions.com
Step 4
Repeat Steps 1-2 for the upper rail and shelf.
Top slot
SHELF INSTALLATION
Step 3
Screw (4x) M6x15 screws into shelf from underneath by hand into pre-drilled holes.
Use low to medium
torque strength
2
3
1
M6 x 15
Tapping Screw
15mm
4

AMOBI TEAM ASSEMBLY GUIDE | 20 amqsolutions.com
Step 1
Screw (4x) M6x15 screws into shelf from underneath by hand into pre-drilled holes.
Insert hood on top of frame and use (3x) M6x12 screws to secure.
SHELF/HOOD INSTALLATION
3
Use low to medium
torque strength
M6 x 15
Tapping Screw
15mm
4
M6 x 12
12mm
Allen
4mm 4mm