AMX Modero G5 User manual

Instruction Manual
Modero X Series G5 Touch Panels
Modero X-Series G5
Panoramic Touch Panels
MXT/D-2001-PAN - 20.3" Modero X Series G5 Panoramic Touch Panels
MXT/D-1901-PAN - 19.4" Modero X Series G5 Panoramic Touch Panels
Last Revised: 9/02/2014

AMX Limited Warranty and Disclaimer
This Limited Warranty and Disclaimer extends only to products purchased directly from AMX or an AMX Authorized Partner which
include AMX Dealers, Distributors, VIP’s or other AMX authorized entity.
AMX warrants its products to be free of defects in material and workmanship under normal use for three (3) years from the date of
purchase, with the following exceptions:
• Electroluminescent and LCD Control Panels are warranted for three (3) years, except for the display and touch overlay compo-
nents are warranted for a period of one (1) year.
• Disk drive mechanisms, pan/tilt heads, power supplies, and MX Series products are warranted for a period of one (1) year.
• AMX lighting products are guaranteed to switch on and off any load that is properly connected to our lighting products, as long
as the AMX lighting products are under warranty. AMX also guarantees the control of dimmable loads that are properly con-
nected to our lighting products. The dimming performance or quality there of is not guaranteed, impart due to the random combi-
nations of dimmers, lamps and ballasts or transformers.
• AMX software is warranted for a period of ninety (90) days.
• Batteries and incandescent lamps are not covered under the warranty.
• AMX AutoPatch Epica, Modula, Modula Series4, Modula CatPro Series and 8Y-3000 product models will be free of defects in
materials and manufacture at the time of sale and will remain in good working order for a period of three (3) years following the
date of the original sales invoice from AMX. The three-year warranty period will be extended to the life of the product (Limited
Lifetime Warranty) if the warranty card is filled out by the dealer and/or end user and returned to AMX so that AMX receives it
within thirty (30) days of the installation of equipment but no later than six (6) months from original AMX sales invoice date. The
life of the product extends until five (5) years after AMX ceases manufacturing the product model. The Limited Lifetime Warranty
applies to products in their original installation only. If a product is moved to a different installation, the Limited Lifetime Warranty
will no longer apply, and the product warranty will instead be the three (3) year Limited Warranty.
All products returned to AMX require a Return Material Authorization (RMA) number. The RMA number is obtained from the AMX
RMA Department. The RMA number must be clearly marked on the outside of each box. The RMA is valid for a 30-day period. After
the 30-day period the RMA will be cancelled. Any shipments received not consistent with the RMA, or after the RMA is cancelled, will
be refused. AMX is not responsible for products returned without a valid RMA number.
AMX is not liable for any damages caused by its products or for the failure of its products to perform. This includes any lost profits, lost
savings, incidental damages, or consequential damages. AMX is not liable for any claim made by a third party or by an AMX Autho-
rized Partner for a third party.
This Limited Warranty does not apply to (a) any AMX product that has been modified, altered or repaired by an unauthorized agent or
improperly transported, stored, installed, used, or maintained; (b) damage caused by acts of nature, including flood, erosion, or earth-
quake; (c) damage caused by a sustained low or high voltage situation or by a low or high voltage disturbance, including brownouts,
sags, spikes, or power outages; or (d) damage caused by war, vandalism, theft, depletion, or obsolescence.
This limitation of liability applies whether damages are sought, or a claim is made, under this warranty or as a tort claim (including
negligence and strict product liability), a contract claim, or any other claim. This limitation of liability cannot be waived or amended by
any person. This limitation of liability will be effective even if AMX or an authorized representative of AMX has been advised of the
possibility of any such damages. This limitation of liability, however, will not apply to claims for personal injury.
Some states do not allow a limitation of how long an implied warranty last. Some states do not allow the limitation or exclusion of inci-
dental or consequential damages for consumer products. In such states, the limitation or exclusion of the Limited Warranty may not
apply. This Limited Warranty gives the owner specific legal rights. The owner may also have other rights that vary from state to state.
The owner is advised to consult applicable state laws for full determination of rights.
EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY, AMX MAKES NO OTHER WARRANTIES, EXPRESSED OR
IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. AMX
EXPRESSLY DISCLAIMS ALL WARRANTIES NOT STATED IN THIS LIMITED WARRANTY. ANY IMPLIED WARRANTIES THAT
MAY BE IMPOSED BY LAW ARE LIMITED TO THE TERMS OF THIS LIMITED WARRANTY. EXCEPT AS OTHERWISE LIMITED
BY APPLICABLE LAW, AMX RESERVES THE RIGHT TO MODIFY OR DISCONTINUE DESIGNS, SPECIFICATIONS, WARRAN-
TIES, PRICES, AND POLICIES WITHOUT NOTICE.

Table of Contents
i
MXD/T-2001-PAN and MXD/T-1901-PAN Modero X Series® G5 Panoramic Touch Panels
Table of Contents
Modero X Series G5 Panoramic Touch Panels (20.3" & 19.4") ...........................1
Overview .................................................................................................................. 1
Sleep Button ............................................................................................................. 2
Powering On/Off X Series G5 Panels........................................................................ 2
Configuration and Programming .............................................................................. 2
Bluetooth Support .................................................................................................... 3
NFC Support............................................................................................................. 3
Active Video Windows - Limitations.......................................................................... 4
Cleaning the Touch Overlay and Case ...................................................................... 4
A Note About Wall and Rack Installation.................................................................. 4
Installation Recommendations......................................................................................... 6
MXT/D-2001-PAN - 20.3" X Series G5 Panels ....................................................7
MXT-2001-PAN (Tabletop)........................................................................................ 7
MXT-2001-PAN Specifications ........................................................................................ 7
MXT-2001-PAN Installation ........................................................................................... 10
Connector Locations ................................................................................................................. 10
Wiring Guidelines .......................................................................................................... 11
Wiring a Power Connection ...................................................................................................... 11
MXD-2001-PAN (Wall-Mount - Portrait/Landscape)................................................ 12
MXD-2001-PAN Specifications ..................................................................................... 13
MXD-2001-PAN Installation .......................................................................................... 16
Installing the MXD-2001-PAN Into a Wall ................................................................................. 16
Installing the Backbox ........................................................................................................... 18
Wiring a Power Connection ...................................................................................................... 24
Uninstalling the MXD-2001-PAN ................................................................................... 25
Removing an MXD-2001-PAN From Its Backbox ...................................................................... 25
MXT/D-1901-PAN - 19.4" X Series G5 Panels ..................................................27
MXT-1901-PAN (Tabletop)...................................................................................... 27
MXT-1901-PAN Specifications....................................................................................... 27
MXD-1901-PAN (Wall-Mount - Landscape/Portrait)................................................ 30
MXD-1901-PAN Specifications ..................................................................................... 30
MXT-1901-PAN Installation..................................................................................... 33
Connector Locations...................................................................................................... 34
Wiring Guidelines ................................................................................................... 35
Wiring a Power Connection........................................................................................... 35
MXD-1901-PAN Installation .................................................................................... 35
Installing the MXD-1901-PAN Into a Wall ..................................................................... 36
Installing the Backbox ............................................................................................... 38

ii MXD/T-2001-PAN and MXD/T-1901-PAN Modero X Series® G5 Panoramic Touch Panels
Table of Contents
Wiring a Power Connection........................................................................................... 43
Uninstalling the MXD-1901-PAN............................................................................. 44
Removing an MXD-1901-PAN From Its Backbox........................................................... 44
Upgrading Firmware .........................................................................................45
Overview ................................................................................................................ 45
Upgrading Firmware via USB Flash Drive ............................................................... 45
Load the Firmware on a USB Flash Drive ...................................................................... 45
Transfer the Firmware File From the Flash Drive to the Touch Panel............................ 45
Removing All Data From The Touch Panel .................................................................... 46
Resetting the Touch Panel Settings to Factory Defaults ............................................... 46
Resetting to Factory-Installed Firmware........................................................................ 47
Installing Previous Firmware.......................................................................................... 48
Installing New Firmware From an External USB Stick ................................................... 48
Installing Touch Panel Pages From an External Disk ..................................................... 49
Removing User Pages From a Touch Panel ................................................................... 50
Upgrading Firmware Via NetLinx Studio (v3.4 or Higher) ...................................... 51
Appendix: Troubleshooting ..............................................................................55
Overview ................................................................................................................ 55
Panel Doesn’t Respond To Touches .............................................................................. 55
Panel Isn’t Appearing In The Online Tree Tab ............................................................... 55
Can’t Connect To a NetLinx Master .............................................................................. 55
Only One Modero Panel In My System Shows Up ......................................................... 55

Modero X Series G5 Panoramic Touch Panels (20.3" & 19.4")
1
MXD/T-2001-PAN and MXD/T-1901-PAN Modero X Series® G5 Panoramic Touch Panels
Modero X Series G5 Panoramic Touch Panels (20.3" & 19.4")
Overview
The most elegant interface designed specifically for dedicated room control has been significantly enhanced to include a
new G5 Graphic Engine to provide even faster and smoother animations and transitions, and we quadrupled the
processing power with a new Quad Core Processor. This new generation of touch panels is built for usability offering
edge-to-edge capacitive touch glass with multi-touch capabilities. It features advanced technology empowering users to
operate AV equipment seamlessly, while providing the ultimate in audio and video quality. The distinctive appearance
will complement even the most sophisticated meeting facilities and homes. With a lightning fast processor, brilliant
graphics and enhanced capabilities, the Modero X Series is the control surface that simply delivers more.
The Modero X Series G5 Touch Panels covered in this manual include:
FIG. 1 Modero X Series G5 Panoramic Touch Panels (20.3" and 19.4")
Modero X Series G5 Touch Panels
Name FG# Description Page Ref
MXT-2001-PAN FG5968-35 20.3" Modero X Series G5 Panoramic Tabletop page 7
MXD-2001-PAN-P
MXD-2001-PAN-L Portrait: FG5968-36 Landscape: FG5968-37 20.3" Modero X Series G5 Panoramic Wall-Mounts page 12
MXT-1901-PAN FG5968-41 19.4" Modero X Series G5 Panoramic Tabletop page 27
MXD-1901-PAN-P
MXD-1901-PAN-L Portrait: FG5968-42 Landscape: FG5968-43 19.4" Modero X Series G5 Panoramic Wall-Mounts page 30
For information on the non-Panoramic X Series G5 touch panels, refer to the Modero
X-Series G5 Touch Panels Instruction Manual.

Modero X Series G5 Panoramic Touch Panels (20.3" & 19.4")
2MXD/T-2001-PAN and MXD/T-1901-PAN Modero X Series® G5 Panoramic Touch Panels
Sleep Button
X Series G5 touch panels are operated using its integral touchscreen, as well as the Sleep button. The Sleep button is
located in the in the center of the top panel of the device for tabletop and landscape wall-mount panels; it is located in the
center of the left panel for portrait panels (see FIG. 2 on page 2).
If the device has gone into its Sleep Mode, a touch of the touchscreen or of the Sleep button will reactivate it.
Powering On/Off X Series G5 Panels
Modero X Series G5 touch panels may be powered on by touching and holding the Sleep button.
To power off the panel, press and hold the Sleep button, and select Power Off on the on-screen menu (FIG. 3 on page 2):
Configuration and Programming
X Series G5 touch panels are equipped with a Settings menu that provides the ability to configure various features on the
panels.
To access the Settings menu, press and hold the Sleep button, and select Settings (FIG. 3). This opens the main Settings
menu (FIG. 4):
FIG. 2 Sleep Button location - Tabletop, Landscape and Portrait layouts)
FIG. 3 Sleep Button - Press and hold to access Power Off/Settings options
FIG. 4 Main Settings menu
Sleep button (on top panel)
Sleep button
(on left panel)
Sleep button
(on top panel)

Modero X Series G5 Panoramic Touch Panels (20.3" & 19.4")
3
MXD/T-2001-PAN and MXD/T-1901-PAN Modero X Series® G5 Panoramic Touch Panels
Information on the Settings menu, panel configuration, and programming is included in the Modero X Series G5
Programming Guide, available at www.amx.com.
Bluetooth Support
X Series G5 touch panels allow the use of Bluetooth keyboard and mouse combinations, using HID Profile v1.1. Using a
keyboard and mouse with the device requires use of the MXA-BT Bluetooth USB Adapter (FG5968-19).
NFC Support
X Series G5 touch panels support Near Field Communications™ (NFC) Technology. NFC technology facilitates making
transactions, exchanging digital content, and connecting electronic devices with a touch. NFC transmissions are short-
range (from a touch to a few centimeters), working with existing contact-less card technologies and containing built-in
capabilities to support secure applications. By using NFC technology, users may receive access to touch panels and
touch panel pages through access badges and other card options.
The maximum range for the NFC antenna is 0.5" (12.7 mm), but the typical usage range is 0.25" (6.35 mm).
The antenna itself is accessible from the front of the panel, 3.25" (82.55 mm) from the left corner of the panel
and 0.375" (9.53 mm) from the top edge.
When using an NFC device with the X Series G5 panel, align your device’s antenna with the center of the touch panel’s
antenna (FIG. 5):
Programming the Modero X Series G5 touch panels require the use of the latest
versions of NetLinx Studio and TPDesign5, both available to download at
www.amx.com.
Common Access Card (CAC) Support In MXT/D-2000XL-PAN
Card Type Card Unique Identifier (UID) Card Data Personal Identity Verification (PIV) Card
holder UID
15693 8 byte UID Not Supported N/A
14443A Non-Gov't 4, 7 or 10 byte UID (1) Not Supported N/A
14443A Gov't 4, 7 or 10 byte UID (1) Not Supported (2) Not currently
14443B Non-Gov't 4 byte UID Not Supported N/A
14443B Gov't 4 byte UID Not Supported (2) Not currently
FeliCa Not Supported Not Supported N/A
(1) The UID can be a fixed unique number or a random number dynamically generated by the card.
(2) Requires contact card reader (not accessible via NFC)
FIG. 5 NFC antenna location (Tabletop, Landscape and Portrait layouts)
NFC Sensor
NFC Sensor
NFC Sensor

Modero X Series G5 Panoramic Touch Panels (20.3" & 19.4")
4MXD/T-2001-PAN and MXD/T-1901-PAN Modero X Series® G5 Panoramic Touch Panels
Active Video Windows - Limitations
The following limitations apply to the display of active video windows on X Series G5 panels:
Maximum supported number of active video windows displayed simultaneously on the panel: 2
While this limitation is not enforced (i.e the TPDesign5 application will allow you include any number of
video windows in the panel design), attempting to display more than two active video windows at one time
may have a negative impact on the panel’s overall performance.
Maximum supported resolution for video windows: 720dpi
Maximum supported frame rate for video windows: 30fps
Cleaning the Touch Overlay and Case
Both the MXD/T-2001-PAN and the MXD/T-1901-PAN come with the MXA-CLK Modero X Series Cleaning Kit
(FG5968-16), which may be used to clean fingerprints and dirt from the device. This kit comes with cleaning cloths and
a bottle of cleaning fluid specifically for use with the device.
When cleaning the device, do not directly spray the device with cleaning fluid. Instead, spray the cloth and
then apply the cloth to the touch screen.
Do NOT use abrasives of any type to clean the device, as abrasives may permanently damage or remove the
device’s finish.
A Note About Wall and Rack Installation
Some products are installed in areas of differing temperature and cooling methodologies. These include products
installed in walls, racks, cabinets, etc. Those areas may have different temperatures and/or cooling approaches that must
be taken into consideration to maintain the product within the specified operating temperature.
FIG. 6 shows an AMX device installed in a wall with a filled volume (such as with insulation or concrete), as well as
with a closed volume (such as between studs in an otherwise finished wall). The diagram shows how heat generated by
the device or other devices may have no way to escape, and may build up to levels that may affect device operation.
To facilitate NFC antenna access, consider adding an icon to the panel’s page(s),
pointing to the location of the antenna on the panel.
The term "Active Video Windows" refers to any "window" on the touch panel (which
could be a Page, Popup, Sub-Page or Button) that is displaying active video content.

Modero X Series G5 Panoramic Touch Panels (20.3" & 19.4")
5
MXD/T-2001-PAN and MXD/T-1901-PAN Modero X Series® G5 Panoramic Touch Panels
In FIG. 7, the diagram displays an AMX device in a typical rack mounting, with full air circulation around the front and
back of the device. In this case, the main concern is with heat building up between components, possibly to levels that
may affect device operation.
FIG. 6 Heat convection in filled or closed volume, limited or no convection
FIG. 7 Heat convection in rack-mounted devices

Modero X Series G5 Panoramic Touch Panels (20.3" & 19.4")
6MXD/T-2001-PAN and MXD/T-1901-PAN Modero X Series® G5 Panoramic Touch Panels
Installation Recommendations
During any installation, a lack of ventilation may produce conditions that may adversely affect the device’s operation. In
these circumstances, special care must be made to make sure that temperatures within enclosed areas do not exceed the
device’s maximum rated temperature.
While the outside temperature of the device may be at or below its maximum
operating temperature, special care must be taken before and during installation to
ensure that the maximum operating temperature is not exceeded within wall or rack
installation spaces.

MXT/D-2001-PAN - 20.3" X Series G5 Panels
7
MXD/T-2001-PAN and MXD/T-1901-PAN Modero X Series® G5 Panoramic Touch Panels
MXT/D-2001-PAN - 20.3" X Series G5 Panels
MXT-2001-PAN (Tabletop)
The MXT-2001-PAN 20.3" Modero X Series® G5 Panoramic Tabletop Touch Panel (FG5968-35) features the G5
Graphic Engine to provide fast and smooth animations and transitions, as well as a Quad Core Processor.
The MXT-2001-PAN features a panoramic capacitive multi-touch screen that provides users access to multiple
applications with minimal navigation. It is hardware-ready for support of Near Field Communication™ (NFC)
Technology to allow personalization of the user experience and productivity enhancing capabilities through integration
with NFC capable personal devices (see the NFC Support section on page 3 for more information).
MXT-2001-PAN Specifications
FIG. 8 MXT-2001-PAN touch panel
MXT-2001-PAN Specifications
DIMENSIONS (HWD) 9 3/16" x 20 3/8" x 5 7/8" (235 mm x 519 mm x 150 mm)
WEIGHT 12.3 lbs (5.58 Kg)
POWER CONSUMPTION Full-On: 35 W (12 VDC, 2.9 A)
Standby: 7 W (12 VDC, 0.6 A)
EXTERNAL POWER
SUPPLY REQUIRED Requires one of these AMX power sources (not included):
• PSN4.4 Power Supply, 4.4 A, 3.5 mm Phoenix, 13.5 VDC (FG423-45)
• PSR4.4 Power Supply, 4.4 A, 3.5 mm Phoenix with Retention Screws (FG423-46)
• MXA-MPL Modero X/S Series Multi Preview Live (FG5968-10)
• MXA-MP Modero X/S Series Multi Preview (FG5968-20)
CERTIFICATIONS • FCC Part 15 Class B
• C-Tick CISPR 22 Class B
• CE EN 55022 Class B and EN 55024
• CB Scheme IEC 60950-1
•IC
• IEC/EN-60950
• UL 60950-1
• RoHS/WEEE compliant
Sleep Button
NFC Sensor
USB Ports (2)
Sleep Button
Cable Slot

MXT/D-2001-PAN - 20.3" X Series G5 Panels
8MXD/T-2001-PAN and MXD/T-1901-PAN Modero X Series® G5 Panoramic Touch Panels
MXT-2001-PAN Specifications (Cont.)
TOUCH SCREEN DISPLAY • Display Type: TFT Active Matrix Color LCD with In-plane Switching Technology (IPS)
• Display Size (WH): 20.4" x 9.5" (519 mm x 242 mm), 21.3" (541 mm) diagonal
• Viewable Area (WH): 18.7" x 7.8" (475 mm x 198 mm ), 20.3" (514 mm) diagonal
• Resolution: 1920x800
• Aspect Ratio: 12:5
• Brightness: 250 cd/m2
• Contrast Ratio: 1000:1
• Color Depth: 16.7M colors
• Illumination: LED
• Touch Overlay: Projected capacitive, multi-touch support, 3 simultaneous max
VIEWING ANGLE • Vertical: ± 89°
• Horizontal: ± 89°
MEMORY • SDRAM: 2 GB
• Flash: 16 GB
• Maximum Project Size: 12 GB flash, available for apps and touch panel files
COMMUNICATIONS • Ethernet: 10/100 port, RJ-45 connector. Supported IP and IP-based protocols: UCP,
TCP, ICMP, ICSP, IGMP, DHCP, FTP, DNS, RFB (for VNC), HTTP
• USB:
(3) USB host 2.0, Type A ports: Firmware upgrade, touch panel file transfer, JPEG
image viewer, HID peripherals, USB audio output for headsets
• Near Field Communication (NFC): Supports standards ISO/IEC 15693, ISO/IEC
14443A, ISO/IEC 14443B; Unique Identifier (UID), typ range=.25", max = .5"
• Bluetooth*:
Mouse/Keyboard: HID Profile v1.1, requires MXA-BT Bluetooth Adapter (FG5968-19)
Handset: Hands Free Profile v1.5, Headset Profile v1.2, requires MXA-BT Bluetooth
Adapter (FG5968-19) and MXA-HST Bluetooth Handset (FG5968-17)
VIDEO • Supported Video Codecs:
MPEG2-TS: MPEG-2 Main Profile @High Level up to 720p at 25 fps (decode only)
MPEG-2-TS: H.264 High Profile @Layer 4, AAC-LC up to 720p at 25 fps (encode/
decode)
MJPEG up to 720p at 25 fps (decode only)
• Supported Video Transport Streams: MPEG-TS for MPEG-2 and H.264, HTTP for
MJPEG
• Max Number of Active Video Streams: 2 (720dpi/30fps)
• Video Conferencing: Panel-to-panel and video chat*
AUDIO • Microphone: -42 dB ±3 dB sensitivity FET microphone
• Speakers: 4 ohm, 2 Watt, 300 Hz cutoff frequency
• Supported Audio Codecs:
MP2 Layer I and II, MP3 (8 kHz, 11.025 kHz, 12 kHz, 16 kHz, 22.05 kHz, 24 kHz,
32 kHz, 44.1 kHz, 48 kHz)
AAC-LC (8 kHz, 96 kHz)
G.711 with µLaw (VoIP* encode/decode at 8 kHz)
Suggested max packet size for G.711 Voice: 20ms
• Audio Output: USB Audio out USB port (head/Hand set support)*
• File Formats: WAV, MP3 (as part of touch panel file only - no USB storage)
• Intercom*: Full Duplex VoIP, SIP v2.0
GRAPHICS ENGINE AMX G5: G5 enhanced feature set supporting multi-touch and gestures, scrolling,
transitions, applications - See TPD5 Operations Guide for more information
EMBEDDED APPLICATIONS • Viewer Applications*: PDF, JPEG, BMP, PNG, TIFF, GIF
• Remote Management: VNC Server
• Video Conferencing: Skype
• Audio Conferencing: Audio (Full Duplex Intercom*)

MXT/D-2001-PAN - 20.3" X Series G5 Panels
9
MXD/T-2001-PAN and MXD/T-1901-PAN Modero X Series® G5 Panoramic Touch Panels
MXT-2001-PAN Specifications (Cont.)
FRONT PANEL
COMPONENTS • Light Sensor: Photosensitive light detector for automatic adjustment of the panel brightness
• Proximity Detector: Max range = ~3', typ range = ~1', FOV = ~10 degrees
• Camera: HD 720p camera for video conferencing/video chat support
• LED Indicators: Camera active indicator
• Sleep Button: Sleep button to activate sleep mode and powering off. Also provides
access to setup pages (can be disabled)
CONNECTIONS • Ethernet: 10/100 port, RJ-45 connector
• USB:
(3) USB host 2.0, Type A ports
(1) Micro-USB device port (currently not in use)
• Power: 2-pin, locking 3.5mm Phoenix connector
ENVIRONMENTAL • Temperature (Operating): 32° F to 104° F (0° C to 40° C)
• Temperature (Storage): 4° F to 140° F (-20° C to 60° C)
• Humidity (Operating): 20% to 85% RH
• Humidity (Storage): 5% to 85% RH
• Power ("Heat") Dissipation:
On: 119.4 BTU/hr
Standby: 23.9 BTU/hr
INCLUDED ACCESSORIES • Locking 2-pin Phoenix mate (41-0002-SA)
• MXA-USB-C, USB Port Cover Kit, Modero X/S Series Touch Panel (FG5968-18)
• HPG-10-10K, 3/4" Mini-Grommet (FG570-01)
• MXA-CLK, Modero X/S Series Cleaning Kit (FG5968-16)
OPTIONAL ACCESSORIES • MXA-STMK-20, Secure Table Mount Kit, 20.3" Modero X Tabletop (FG5968-64)
• MXA-MP, Modero X/S Series Multi Preview (FG5968-20)
• MXA-MPL, Modero X/S Series Multi Preview Live (FG5968-10)
• PSR4.4, Power Supply, 4.4 A, 3.5 mm Phoenix with Retention Screws (FG423-46)
• PSN4.4, Power Supply, 4.4 A, 3.5 mm Phoenix, 13.5 VDC (FG423-45)
• HPG-10-10K, 3/4" Mini-Grommet, 10-Pack (FG570-01-10K)
• MXA-BT, Bluetooth USB Adapter for Modero X/S Series (FG5968-19)
• MXA-CLK, Modero X/S Series Cleaning Kit (FG5968-16)
• MXA-USB-C, USB Port Covers for the Modero X/S Series Touch Panels (FG5968-18)
• MXA-HST, Bluetooth Handset for Modero X/S Series Touch Panels (FG5968-17)
*This feature will be available upon release of a future firmware update.

MXT/D-2001-PAN - 20.3" X Series G5 Panels
10 MXD/T-2001-PAN and MXD/T-1901-PAN Modero X Series® G5 Panoramic Touch Panels
MXT-2001-PAN Installation
Detailed specifications drawings for the MXT-2001 are available to download from www.amx.com.
Connector Locations
Two Type A USB ports are located on the rear right corner of the device (FIG. 10).
USB peripherals (mouse, keyboard, etc.) may be connected to either of the two USB ports on the rear of the device.
FIG. 9 MXT-2001-PAN
FIG. 10 MXT-2001-rear view
Type A USB Ports

MXT/D-2001-PAN - 20.3" X Series G5 Panels
11
MXD/T-2001-PAN and MXD/T-1901-PAN Modero X Series® G5 Panoramic Touch Panels
The power and Ethernet connectors, as well as an additional USB port are located on the bottom of the device ( FIG. 11).
The underside USB port, as well as the two rear USB ports, may be used with a flash drive for page transfers or firmware
upgrades.
The MXT-2001-PAN does not have individual channels on the base of the device to allow passage of cables from
underneath the base. Instead, it has one slot at the base to allow options on cable configuration, with channels for
securing power and Ethernet cables (FIG. 12).
Each channel side has slots for attaching tie-wraps to secure each cable. The ferrite on the power cable must be secured
with the included tie-wrap during installation to prevent the possibility of the panel not sitting flush on the table. Other
cables may be secured with tie-wraps if desired, but this is not necessary.
Wiring Guidelines
The MXT-2001-PAN uses a 12 VDC-compliant power supply to provide power to the panel via the 2-pin 3.5 mm captive
wire PWR connector. The incoming PWR and GND wires from the power supply must be connected to the
corresponding locations within the PWR connector.
Wiring a Power Connection
To use the 2-pin 3.5 mm captive wire connector with a 12 VDC-compliant power supply, the incoming PWR and GND
wires from the external source must be connected to their corresponding locations on the connector (FIG. 13). The
connector uses locking screws to insure a connection to the device, so make sure to insert and tighten the screws before
applying power.
FIG. 11 MXT-2001-PAN underside connectors
FIG. 12 Tie-wrap for power connector ferrite
Ethernet 10/100 Port Type A USB Port
12 VDC Power Port
Tie-wrap channels
Tie-wrap
Ferrite
Apply power to the panel only after installation is complete.
Connecting power to the MXT-2001-PAN should be done using the included 2-pin
3.5mm captive wire connector included with the device. This connector is retained
within its port with locking screws instead of the pins on each side of standard captive
wire connectors, and using force to insert a standard captive wire connector may
damage the device.

MXT/D-2001-PAN - 20.3" X Series G5 Panels
12 MXD/T-2001-PAN and MXD/T-1901-PAN Modero X Series® G5 Panoramic Touch Panels
1. Insert the PWR and GND wires on the terminal end of the 2-pin 3.5 mm captive wire cable.
Match the wiring locations of the +/- on both the power supply and the terminal connector.
2. Tighten the clamp to secure the two wires.
Do not tighten the screws excessively; doing so may strip the threads and damage the connector.
3. Verify the connection of the 2-pin 3.5 mm captive wire to the external 12 VDC-compliant power supply and apply
power.
MXD-2001-PAN (Wall-Mount - Portrait/Landscape)
MXD-2001-PAN 20.3" Modero X Series®G5 Panoramic Wall Mount Touch Panels feature the G5 Graphic Engine to
provide fast and smooth animations and transitions, as well as the Quad Core Processor. These panels feature a
panoramic capacitive multi-touch screen, and are hardware-ready for support of Near Field Communication™ (NFC)
Technology (see the NFC Support section on page 3 for more information).
The MXD-2001-PAN is available in Portrait and Landscape layouts:
FIG. 13 NetLinx power connector wiring diagram
Portrait MXD-2001-PAN-P FG5968-36
Landscape MXD-2001-PAN-L FG5968-37
FIG. 14 MXD-2001-PAN-P/L (Portrait and Landscape)
PWR +
GND -
To the Touch Panel
Power Supply
Sleep ButtonNFC Sensor
Sleep
NFC
Button
Sensor
MXD-2001-PAN-P
MXD-2001-PAN-L

MXT/D-2001-PAN - 20.3" X Series G5 Panels
13
MXD/T-2001-PAN and MXD/T-1901-PAN Modero X Series® G5 Panoramic Touch Panels
MXD-2001-PAN Specifications
MXD-2001-PAN Specifications
DIMENSIONS (HWD) • Landscape: 9 1/2" x 20 3/8" x 11/16" (242 mm x 519 mm x 19 mm)
• Portrait: 20 3/8" x 9 1/2" x 11/16" (519 mm x 242 mm x 19 mm
WEIGHT 9.0 lbs (4.08 Kg)
POWER CONSUMPTION • Full-On: 35 W (12 VDC, 2.9 A)
• Standby: 7 W (12 VDC, 0.6 A)
EXTERNAL POWER
SUPPLY REQUIRED Requires one of these AMX power sources (not included):
• PSN4.4 Power Supply, 4.4 A, 3.5 mm Phoenix, 13.5 VDC (FG423-45)
• PSR4.4 Power Supply, 4.4 A, 3.5 mm Phoenix with Retention Screws (FG423-46)
• MXA-MPL Modero X Series Multi Preview Live (FG5968-10)
• MXA-MP Modero X Series Multi Preview (FG5968-20)
CERTIFICATIONS • FCC Part 15 Class B
• C-Tick CISPR 22 Class B
• CE EN 55022 Class B and EN 55024
• CB Scheme IEC 60950-1
•IC
• IEC/EN-60950
• UL 60950-1
• RoHS/WEEE compliant
TOUCH SCREEN DISPLAY • Display Type: TFT Active Matrix Color LCD with In-plane Switching Technology (IPS)
• Display Size (WH)
Landscape: 20.4" x 9.5" (519 mm x 242 mm), 21.3" (541 mm) diagonal
Portrait: 9.5" x 20.4" (242 mm x 519 mm), 21.3" (541 mm) diagonal
• Viewable Area (WH)
Landscape 18.7" x 7.8" (475 mm x 198 mm ), 20.3" (514 mm) diagonal
Portrait 7.8" x 18.7" (198 mm x 475 mm), 20.3" (514 mm) diagonal
• Resolution
Landscape: 1920x800
Portrait: 800x1920
• Aspect Ratio
Landscape: 12:5
Portrait: 5:12
• Brightness: 250 cd/m2
• Contrast Ratio: 1000:1
• Color Depth: 16.7M colors
• Illumination: LED
• Touch Overlay: Projected capacitive, multi-touch support, 3 simultaneous max
VIEWING ANGLE • Vertical: ± 89°
• Horizontal: ± 89°
MEMORY • SDRAM: 2 GB
• Flash: 16 GB
• Maximum Project Size: 12 GB flash, available for apps and touch panel files

MXT/D-2001-PAN - 20.3" X Series G5 Panels
14 MXD/T-2001-PAN and MXD/T-1901-PAN Modero X Series® G5 Panoramic Touch Panels
MXD-2001-PAN Specifications (Cont.)
COMMUNICATIONS • Ethernet: 10/100 port, RJ-45 connector. Supported IP and IP-based protocols: UCP,
TCP, ICMP, ICSP, IGMP, DHCP, FTP, DNS, RFB (for VNC), HTTP
• USB:
(2) USB host 2.0, Type A ports (1 with limited physical access requiring right angle
connection): Firmware upgrade, touch panel file transfer, JPEG image viewer, HID
peripherals
• Near Field Communication (NFC): Supports standards ISO/IEC 15693, ISO/IEC
14443A, ISO/IEC 14443B; Unique Identifier (UID), typ range=.25", max = .5"
• Bluetooth*:
Mouse/Keyboard: HID Profile v1.1, requires MXA-BT Bluetooth Adapter (FG5968-19)
Handset: Hands Free Profile v1.5, Headset Profile v1.2, requires MXA-BT Bluetooth
Adapter (FG5968-19) and MXA-HST Bluetooth Handset (FG5968-17)
VIDEO • Supported Video Codecs:
MPEG-2-TS: MPEG-2 Main Profile@High Level up to 720p at 25 fps (decode only)
MPEG-2-TS: H.264 High Profile@Layer 4, AAC-LC up to 720p at 25 fps (encode/
decode)
MJPEG up to 720p at 25 fps (decode only)
• Supported Video Transport Streams: MPEG-TS for MPEG2 and H.264; HTTP for
MJPEG
• Max Number of Active Video Streams: 2 (720dpi/30fps)
• Video Conferencing: Panel-to-panel and video chat*
AUDIO • Microphone: -42 dB ±3 dB sensitivity FET microphone
• Speakers: 4 ohm, 2 Watt, 300 Hz cutoff frequency
• Supported Audio Codecs:
MP2 Layer I and II, MP3 (8 kHz, 11.025 kHz, 12 kHz, 16 kHz, 22.05 kHz, 24 kHz,
32 kHz, 44.1 kHz, 48 kHz)
AAC-LC (8 kHz, 96 kHz)
G.711 with µLaw (VoIP*encode/decode at 8 kHz)
Suggested max packet size for G.711 Voice: 20ms
• File Formats: WAV, MP3 (as part of touch panel file only - no USB storage)
• Intercom*: Full Duplex VoIP, SIP v2.0
GRAPHICS ENGINE AMX G5: G5 enhanced feature set supporting multi-touch and gestures, scrolling,
transitions, applications - See TPD5 Operations Guide for more information
EMBEDDED APPLICATIONS • Viewer Applications*: PDF, JPEG, BMP, PNG, TIFF, GIF
• Remote Management: VNC Server
• Video Conferencing: Skype
• Audio Conferencing: Audio (Full Duplex Intercom*)
FRONT PANEL
COMPONENTS Light Sensor: Photosensitive light detector for automatic adjustment of the panel brightness
Proximity Detector: Max range = ~3', typ range = ~1', FOV = ~10 degrees
Camera: HD 720p camera for video conferencing/video chat support
LED Indicators: Camera active indicator
Sleep Button: Sleep button to activate sleep mode and powering off. Also provides
access to setup pages (can be disabled)
CONNECTIONS • Ethernet: 10/100 port, RJ-45 connector
• USB:
(2) USB host 2.0, Type A ports
(1) Micro-USB device port (currently not in use)
• Power: 2-pin, locking 3.5mm Phoenix connector

MXT/D-2001-PAN - 20.3" X Series G5 Panels
15
MXD/T-2001-PAN and MXD/T-1901-PAN Modero X Series® G5 Panoramic Touch Panels
MXD-2001-PAN Specifications (Cont.)
ENVIRONMENTAL • Temperature (Operating): 32° F to 104° F (0° C to 40° C)
• Temperature (Storage): 4° F to 140° F (-20° C to 60° C)
• Humidity (Operating): 20% to 85% RH
• Humidity (Storage): 5% to 85% RH
• Power ("Heat") Dissipation:
• On: 119.4 BTU/hr
• Standby: 23.9 BTU/hr
INCLUDED ACCESSORIES • Locking 2-pin Phoenix mate (41-0002-SA)
• MXA-USB-C, USB Port Cover Kit, Modero X Series Touch Panel (FG5968-18)
• MXA-CLK, Modero X Series Cleaning Kit (FG5968-16)
• Installation Template 20.3" (68-5968-01)
OPTIONAL ACCESSORIES • MXA-RMK-20 Modero X Series Rack Mount Kit (FG5969-60)
• MXA-FMK-20 Flush Mount Kit for 20.3" Modero X Series Wall Mount Touch Panels
(FG5968-68)
• MXA-MP, Modero X/S Series Multi Preview (FG5968-20)
• MXA-MPL, Modero X/S Series Multi Preview Live (FG5968-10)
• PSR4.4, Power Supply, 4.4 A, 3.5 mm Phoenix with Retention Screws (FG423-46)
• PSN4.4, Power Supply, 4.4 A, 3.5 mm Phoenix, 13.5 VDC (FG423-45)
• CB-MXP19/20, Rough-In Box, Modero X Series Touch Panel, Panoramic 19/20
(FG039-15)
• CB-MXP20-F Flush Mount Rough-In Box and Cover Plate, for use with MXA-FMK-20
Flush Mount Kit for 20.3" Modero X Series Wall Mount Touch Panels (FG5968-86)
• MXA-BT, Bluetooth USB Adapter for Modero X/S Series (FG5968-19)
• MXA-CLK, Modero X/S Series Cleaning Kit (FG5968-16)
• MXA-USB-C, USB Port Covers for the Modero X Series Touch Panels (FG5968-18)
• MXA-HST, Bluetooth Handset for Modero X/S Series Touch Panels (FG5968-17)
*This feature will be available upon release of a future firmware update.

MXT/D-2001-PAN - 20.3" X Series G5 Panels
16 MXD/T-2001-PAN and MXD/T-1901-PAN Modero X Series® G5 Panoramic Touch Panels
MXD-2001-PAN Installation
Detailed specifications drawings for the MXD-2001-PAN are available to download from www.amx.com.
The MXD-2001-PAN may be installed directly into a solid surface environment, using either solid surface screws or the
included locking tabs for different mounting options.
Once installed, the MXD-2001-PAN is contained within a clear outer housing known as the Backbox. This Backbox is
removed when installing the device into a wall or when using the optional Rough-In Box accessory (FG039-15).
Installing the MXD-2001-PAN Into a Wall
The MXD-2001-PAN comes with a clear plastic Backbox (FIG. 15) designed to attach the panel to most standard wall
materials. This Backbox has four locking tabs (two on top and two on bottom) to help lock the Backbox to the wall
(FIG. 16).
These locking tabs are only extended AFTER the Backbox is inserted into the wall.
The Backbox also has four slots for accepting the temporary mounting posts mounted on the back of the device.
Refer to A Note About Wall and Rack Installation on page 4 for important notes
on thermal concerns with Rack and Wall installations.
FIG. 15 MXD-2001-PAN Backbox
Locking Tabs
Locking Tabs
Temporary Mounting Posts
Temporary Mounting Posts
For typical mounting surfaces, such as drywall, use the locking tabs as the primary
method for securing the Backbox to the surface. For thin walls or solid surfaces, use
mounting screws (not included).
When installing the Backbox, make sure that the assembly is in the correct position
and in the correct place. Once the locking tabs are extended and locked into place,
removing the Backbox may be difficult without having access to the back of the wall
or causing damage to the wall.
FIG. 16 MXD-2001-PAN (Landscape)
Backbox
Backbox knockouts (X8) Locking tabs (X4)