APS Auto Parts Specialist iRunning Board User manual

iRunning Board Installation Instruction
Application:
2004-2010 Dodge Durango
2006-2009 Dodge Aspen
Page 1of 3
The instruction here is for your reference only. We strongly recommend the
professional installer for best result. We are not responsible for any damage
caused by the installation. Thank you for choosing our product!
REV: 20170601
Step Description
1 Verify all parts are present. Read instructions completely before beginning.
2 Insert hex rivnuts as shown .SEE FIG 2
3 Separate trim from rocker panel and insert bolt plates as shown. Leave loose. SEE FIG 1,2.
4
Loosely attach brackets as shown. SEE FIG 3 .
Tighten top bolt to crimp rivnut until increased resistance is felt. Verify rivnut is not loose in hole,
otherwise re-tighten. Hole bolt plate parallel to rocker panel and tighten bottom nut. Re-attach trim
panel as shown.SEE FIG 4
5 Insert square head bolts as shown (3 per slot,6 per board).SEE FIG 5.
7
Attach board to brackets as shown . Make sure board and brackets are properly aligned and tighten
fasteners. Recommended torque values are 10 FT.LBS .for M6 square head fasteners and 23 FT.LBS. For
6mm fasteners. SEE FIG 6
9
INSTALLATION IS COMPLETE.
FINISH PROTECTION
Products have a high quality finish that must be cared for like any other exposed finish on the vehicle. Protect the
finish with a non-abrasive automotive wax, (e.g.Pure Carnauba) on a regular basis. The use of any soap, polish or
wax that contains an abrasive is detrimental, as the compounds scratch the finish and open it to corrosion.
Item Part Name QTY Item Part Name QTY
1 Running Board (Driver+Passenger) 2 7 10-1.5mm Flange Nuts 6
2 Mounting Bracket 6 8 10mm rivnut 6
3 10mm x 35mm Button Head Bolt Plates 6 9 M6 Square Head Bolt 12
4 10mm x 25mm Hex Bolts 6 10 M6 Flat Washers 12
5 11mm x 20mm x 2mm Flat Washers 12 11 M6 Nylon Lock Nuts 12
6 10mm Lock Washers 12
Mounting Bracket

iRunning Board Installation Instruction
Application:
2004-2010 Dodge Durango
2006-2009 Dodge Aspen
Page 2of 3
The instruction here is for your reference only. We strongly recommend the
professional installer for best result. We are not responsible for any damage
caused by the installation. Thank you for choosing our product!
REV: 20170601

iRunning Board Installation Instruction
Application:
2004-2010 Dodge Durango
2006-2009 Dodge Aspen
Page 3of 3
The instruction here is for your reference only. We strongly recommend the
professional installer for best result. We are not responsible for any damage
caused by the installation. Thank you for choosing our product!
REV: 20170601
*Pictures are for reference only, actual
bars may be a little different.