Switch the unit on by pressing the
on/o button. The breastpump
displays a welcome message.
When positioning the Breastshell
light pressure is required for a good
seal, rm pressure will inhibit your
milk ow as the milk ducts are easily
compressed.
The LCD display has an orange
background indicating stimulation
mode and the small droplet icon is
displayed.
The pump automatically starts in
stimulation mode.
The cycle and vacuum can be
adjusted one level at a time, by
repeatedly pressing pq or by
holding down the pq button.
Cycles is stimulation mode - Brief
massaging before expressing will
encourage milk ow and stimulate
the milk ejection reex (let down).
Setting the cycles high and the
vacuum low will replicate the rapid
sucking and low suction the baby
does when feeding.
Vaccuum is expressing mode - The
pump automatically switches to
expression mode after two minutes.
If ‘let down’ has occurred and your
milk is owing, reduce the cycles
and increase the vacuum until you
nd the most comfortable level for
you. If ‘let down’ does not occur go
to ‘Repeat Stimulation’ stage.
Expressing with stimulation mode
Operating Instructions
IMPORTANT If ‘let down’ has not
been achieved and the milk is not
owing press the droplet button
once and it will return to stimulation
mode and will start the two minute
cycle again.
If your milk ow stops and you are
double pumping turn the pump
o, massage the breasts and start
again. If you are single pumping turn
the pump o, switch to the other
breast and start again
Press the button when nished.
Repeat stimulation
Switch on the unit by pressing the
on/o button.
Immediately press the droplet
button and the machine
changes to sensitive mode.
The LCD displays the green
background for expression mode
and the larger droplet icon is
displayed.
The expression mode starts with an
especially mild, gentle and low level
vacuum and cycle. Gently adjust the
vacuum and cycle to a level that
feels comfortable.
Timing starts automatically
when the Carum is switched on.
To stop the timer press the
button when the breastpump is
running. The timer will remain
de-activated until it is restarted
by pressing the button again.
The timer can be switched on
and o in either stimulation or
expression mode.
Press the button once to
reduce the intensity of the
backlight. The dim function
can be turned on and o as
required.
Timer operation
Backlight button
Sensitive Setting
Individual
phases
Ultra-quiet
and gentle
Closed
vacuum
To get the milk to start to ow
set the cycles high
and the vacuum low
Once the milk starts to ow
set the vacuum higher
and the cycles lower
Pumping Poem
If you need any further help please refer to the Carum user manual, visit our website for videos and guides, or contact us for an online consultation.
