Argos 338/8619 D User manual

White edge mirror
Dimensions
Width - 40cm
Depth - 40cm
Height - 5cm
Issue 1 - 15/09/14
Important –Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Assembly Instructions- Please keep for future reference 338/8619 D

Safety and Care Advice
Important– Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
pages 2.
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble on a soft level
surface to avoid damaging the
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
• Dispose of all packaging
carefully and responsibly.
1
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
Care and maintenance
Glass safety– Take care when handling glass, please follow the advice below
●If a glass component is
chipped or broken replace with
glass of the type described on
this instructions. Consult the
manufacturer, retailer or agent
with regard to obtaining a
manufacturing specification and
shape for replacement glass
quoting the model number, and
batch or date of manufacture.
●Do not place very hot or
cold items against or in close
proximity to the glass
surfaces unless adequately
thick insulating material is
used to prevent such items
coming into contact with the
glass.
●Do not strike the glass with
hard or pointed items.
●When cleaning glass panels
or mirrors use a damp cloth or
leather with washing up liquid or
soft soap if necessary.
●Do not use washing powders
or any other substances
containing abrasives since these
substances scratch glass.

Components - Panels
Please check you have all the panels listed below
2
Mirror
1
Screw cap x 2
Tools required
A
E
Screw cup x 2 Rubber pad x 2
B C
Note:The quantities beloware the correct amount to complete the assembly. In some cases more
Wall plug (for solid walls only) x 2
D
Components - FittingsIf you have damaged or missing components,
call the Customer Helpline: 08456 400800
Foam pad x 4
F
Phillips screwdriver
(medium & small)
Small
hammer
Drill
7mm Suitable drill bit
(for use with wall plug) Eye protection
(when using a
hammer)
Screw x 2

3
Assembly Instructions
Step 1
Lay the mirror upside
down on a soft surface.
Peel off the cover on
foam pad , stick the
foam pad onto the corner
of mirror frame as shown.
F
F
1
1
Step 2 Mirror side face downwards.
Wall
Do not over tighten.
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Home Retail Group plc. Avebury, 489-499 Avebury Boulevard. Milton Keynes. MK9 2NW
Assembly is complete.
Note: Wall plugs supplied are
for solid walls only.
be used for yourwall, seek
professional advice if in doubt.
Decide upon the position
to be fixed.
Using a spirit level make
sure the unit is level.
Mark fixing hole on wall
and remove unit.
Drill 7mm hole and insert
wall plug E.
Warning:
Before drilling,
check wall for
Reposition the unit, push
Screw through the
central hole in Screw
cup and Rubber
pad and then secure
into the Wall plug as
shown, do not over
tighten.
Secure the Screw cap
onto the Screw cup.
hidden pipes
and cables.
E
A
A
C
C
B
B
D
D
E