Argos 314/2769 User manual

Hearts Bed Frame
Assembly Instructions - Please keep for future reference 314/2769
325/8691
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline:
Argos = 0345 640 0800
Issue 1 - 13/10/14
Dimensions
Width - 94.5cm
Depth - 197.5cm
Height - 96cm

IMPORTANT!
KEEP FOR
FUTURE
REFERENCE
• Check you have all the
components and tools listed on
the following pages.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• During assembly do not stand
or put weight on the product, this
could cause damage.
• Assemble the item as close to
its final position (in the same
room) as possible.
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
• Unit weight: 16.38 kgs.
1
Safety and Care Advice
Important - Please read these instructions fully before starting assembly
Care and maintenance
Handy Hints
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
• Assemble all parts and bolts
loosely during assembly, only
once the product is complete
should you fully tighten the bolts.
• Regularly check and ensure
that all bolts and fittings are
tightend properly.
Warnings
• Regularly check and ensure
that all bolts and fittings are
tightened properly.
• The recommended mattress
size is L1900 x W910 mm.
• This product should only be
used on firm, level ground.
• Make sure the legs remain in
contact with the ground.
• Not suitable for children under
4 years.
• Prohibit your children from
bouncing and jumping on the
bed.
• Do not place this child’s bed
near heat sources, windows
(blind cords, curtain pulls or
other strings or cords) and other
furniture
• Place the bed tight to any wall
or have a gap of 300mm
between the wall and the side of
the bed.
• Do not use this child’s bed if
any part is broken, torn or
missing.
• THIS BED COMPLIES WITH
BS8509:2008+A1:2011
Manufacturer: BL Packaging Co.
Ltd.

2
Components - Parts
Components - Fittings
Please check you have all the parts listed below
Please check you have all the fittings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
If you have damaged or missing components, call the
Customer Helpline: Argos = 0345 640 0800
Ruler - Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 115 120 125 130 135 140 145 150 155 160 165 170
105
1Headboard
(93 x 63.5 x 3.2cm)
2Footboard
(93 x 76 x 3.2cm)
5
Rail x 2
(191.5 x 11 x 2.5cm)
4Slat x 24
(90.5 x 2.5 x 3cm)
3Headboard leg x 2
(38 x Ø32cm)
C
AB
M6 x 28mm Bolt x 4 M6 x 15mm Bolt x 4
Mattress stopper x 4
D
Bolt nut x 4
Allen key x 2
E

3
Step 1
Assembling headboard
legs
Insert headboard legs
into holes on headboard
as shown.
3
3
3
13
1
Step 2
Assembly Instructions
C
A
C
A
C
A
5
5
1
3
3
C
A
1
3
C
A
A
C
5
1
Assembling headboard
Attach the side rail to
headboard & as
shown. Fix through holes
using bolts & bolt
nuts .
Important:
Fasten bolts &
nuts using 2 allen
keys but do not
fully tighten at this
stage.
A
C
E
1 3
5

4
2
Assembling footboard
Attach footboard to
the assembled bed frame
as shown. Fix through
holes using bolts .
Important:
Fasten bolts
using allen key
but do not fully
tighten at this
stage.
Step 3
Assembly Instructions
B
B
B
5
B
B
E
B
2
25
Attaching slats
Insert each slats into
holes on side rails .
Lock it into position by
pushing firmly down with
your hand.
Note: Make sure
the slat is aligned
to the hole before
pushing it firmly
down.
Important:
After all slats are
positioned, tighten
all bolts & nuts
fixed in previous
steps using allen
keys .
5
4
D
Step 4
5
4
2
5
B
4x24
5
5

5
If you need help or have damaged or missing parts, call the Customer Helpline:
Argos = 0345 640 0800
Assembly Instructions
5
5
D
D
D
Attaching mattress
stoppers
Insert the mattress
stoppers into holes on
the side rails .
Assembly is complete.
Step 5
D
5
D
5
D