Argos St-Oil User manual

Long Drawer - St-Oil
Dimensions
Length - 186cm
Depth - 91cm
Height - 21.5cm
Weight - 15kg
Issue 1 - 15/05/14
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline:
0045 7668 8055 or e-mail: order@flexa.dk
Assembly Instructions - Please keep for future reference 6338958

1
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
pages 2 and 3.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close
to its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could
damage the unit. Only use hand
screwdrivers.
• Dispose of all packaging
carefully and responsibly.
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
Care and maintenance
Note: if required the next
page can be cut out and used
as reference throughout the
assembly. Keep this page with
these instructions for future
reference.

Components - Parts
Please check you have all the parts listed below
2
Base list x2
(88.2x6.5x1.5cm)
3
No. 12-01508821
Drawer side right x1
(89.8x17.0x1.5cm)
1
No. 15-01508981-7
Drawer side left x1
(89.8x17.0x1.5cm)
2
No. 15-01508982-7
Drawer front x1
(185.6x21.5x1.5cm)
4
No. 15-01518561-7
Drawer back x1
(176.5x17.0x1.5cm)
5
No. 12-01517651-7
Drawer base x1
(177.6x89.2/44.6x0.3cm)
6
No. 4309-031776
If you have damaged or missing components,
call the Customer Helpline: 0045 7668 8055

3
Please check you have all the fittings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
Components - Fittings
4,0x40mm Chipboard screw x12
Tools required
A
3,5x15mm Chipboard screw x8
B
E
C
8x30mm Dowel x4
D
Phillips
screwdriver
(medium)
Small
hammer
Flatblade
screwdriver
(medium)
Ø15x9,5mm Minifix cam x4
Ruler/tape
measure
Eye protection
(when using a
hammer or glue)
Ø15/Ø6x24mm Spacer x2
FNo. 3940-000241
H
Ø7x34mm Minifix bolt x4
G
Ø26x28,5mm Castor x4 Ø40x30mm Knob x2
INo. 4001-022-7No. 4020-005 No. 4003-002
No. 3903-40045
No. 3930-08030
No. 3902-35015
No. 3901-40040
No. 3933-15010 4,0x45mm Chipboard screw x2

4
Assembly Instructions
Step 1
Attach dowels Dto the
drawer sides 1and 2
.
It may be necessary
to tap the dowels in
very gently with small
hammer.
Attach minifix bolts Gto
the drawer front 4.
Attach knobs Ito the
drawer front 4with
screws A.
Attach the drawer sides
1and 2to the drawer
front 4with the minifix
cams E.
1
2
4
4
D
G
G
G
D
D
I
A
I
I
A
A
E
E
E
4
2
1
Step 2
Step 3