Argos 460/9830 Datasheet

Double Heavy Duty Covered Rail-White/Black
Assembly lnstructions - Please keep for future reference 460/9830
487/5846
Dimensions
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts,call the Customer helpline:0345 6400800
Width - 117cm
Depth - 50cm
Height - 160cm
Issue 1-25/0/15

Safety and Care Advice
Important - Please read these instructions fully before starting assembly
Care and maintenance
• Check you have all the
components and tools listed on
page 2.
• Remove all fittings from the
plastic bags and separate them into
their groups.
• Keep children and animals away
from the work area, small parts
could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting
• Do not stand or put over
weight on the parts this
could cause damage.
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on this
unit.
• This product should not be
discarded with household waste.
take to your local authority waste
disposal centre.
• Assemble the unit as close to its
final position (in the same room)
as possible.
• Assemble on a soft level surface
to avoid damaging the unit or your
floor.
•Warning:Before drilling,check
the wall for hidden pipes and
cables.
•Warning:Max loading weight
• Dispose of all packaging carefully
and responsibly.
• Parts of the assembly will be
easier with 2 people.
• If using power tools, please
follow the safety instructions
supplied with the tools.
• We do not
recommend the use
of power drill/drivers
for inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
!
1
Top shelf
Hanging rail
Bottom shelf 

Components - Parts If you need help or have damaged or missing
parts, call the Cust omer helpline:0345 6400800
Please check you have all the parts listed below
Components - Fittings
Please check you have all the parts listed below
Tools required
Note: The quantities below are correct amount to complete the assembly.
In some cases more fittings may be supplied than required
2
A B
Screw x 2 Wall plug (for solid walls only)x2
MEASURE
Tape Measure
1 Thin rods x 2pcs(80cm) 2 Thin rods with screw
thread x 2pcs(80cm)
3 Shelf x 3pcs(117x50cm)
4 Thin rods x 2pcs(85cm) 5 Thin rods with screw
thread x 2pcs(80cm)
6 Support bar x 1pcs(117cm) 7 Hanging rail x 1pcs(117cm)
8 Cover x 1pcs
9 Plastic holder x 28pcs
10 screw thread x 2pcs

Assembly Instructions
3
Step 1
Step 1
a:
b:
c:
d:
1
1
2
2
1
1
1
1
1
4
4
5
5
10
10
1
2
2
2
2
2
2
3
3
3
9
9
9
9
Note: It would be useful
to ask someone to help
you at this stage.
a: Attach connector 9
to thin rods 1 and 2
b: Insert shelf 3
into thin rod 1 and
2 , then fix shelf 3
in the bottom
d: Insert rod 4 into
rod 1 . Attach rod 5
to rod 2 using screw
thread 10
c: Attach plastic part 9
to the desire position as
shown. Insert shelf 3
into rod 1 and rod 2
3
3
3

Assembly Instructions
4
Step 2
4
4
4
4
4
5
5
4
6
6
3
7
9
9
a:
b:
c:
b: Attach plastic part 9
to the desire position
as shown. Insert shelf
3 into the rod 4 and
rod 5
c: Attach hanging rail
7 to the shelf 3 as
shown.
a: Attach plastic part 9
to the desire position as
shown.Insert support
bar 6 into the rod 4

Assembly Instructions
5
a:
b:
Step 3
a: Fitting the cover
into the assembled
frame as shown in the
figure.
b: Fasten the ties at
bottom.
Note: It is
recommended that two
people fit the cover to
the frame.
8
8

Assembly Instructions
6
Step 4
Fixing to wall
It is recommended that
the wardrobe is fixed to
a wall.
Mark the fixing hole on
the wall and remove the
wardrobe. Drill a hole and
insert a wall plug .
Before drilling,
check the wall for
hidden pipes and
cables.
Reposition the wardrobe
and fix the wall strap
using screw .
The assembly is now
complete.
Warning:
Note:
The correct type of fixing
must be used for your
wall,seek professional
advice if doubt.
B
A
!
B
A
Top panel
wall
If you need help or have damaged or missing parts,call the Customer helpline: 0345 6400800

7