Argos 418/6023 User manual

Assembly Instructions - Please keep for future reference
Dimensions
Width - 78cm
Depth - 29cm
Height -180cm
Important - Please read these instructions fully before starting assembly
issue 23/03/15
418/6023
Open End Bookcase - Double
If you need help or have damaged or missing parts, call the Customer Helpline
Argos = 0345 6400800
The maximum weight of the
children user: 50kgs.
Shelf (67 x 34.9cm)
1
Back (69.8 x 69.8cm)
5
15mm Screw x 22
Top & Bottom x 2 (67 x 34.9cm)
3
Wall strap x 1
I
12mm Screw x 1
J
26mm Screw x 1
G
Metal plate x 1
H
Unfinished edge
Unfinished edge
through hole
Unfinished edge
2
Top side
1
Assembly is complete.
c:
c: Assembly is
complete.
Self adhesive foot pads x 4
Screw nut x 12
b: Use screwdriver to
turn the screw nut make
the hole be aligned.
b:
BB
Top side
Bottom side
A
A
2
2
12
This parts should be the top shelf
D
2
Shelf x 3 (38.4 x 27.4cm)
C
Step Step 2
2
F
10
9
A
A
We do not
recommend the use
of power drill/ drivers
for inserting screws,
as this could damage
the unit. Only use hand
screwdrivers.
X 4
X 4
• Assemble all parts and bolts
loosely during assembly, only
once the product is complete
should you fully tighten the bolts

1
To reduce
the likelihood of
damaging your
product please
ensure that your
power drill is set on a low torque
setting.
Safety and Care Advice
Important - Please read these instructions fully before starting assembly
Check you have all the
components and tools listed on
the following pages.
plastic bags and separate them
into their groups.
Remove all fittings from the
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough
space to layout the parts before
starting.
During assembly do not stand
or put weight on the product,
this could cause damage.
Assemble the item as close
to its final position (in the same
room) as possible.
Assemble on a soft level
surface to avoid damaging the
unit or your floor.
Parts of the assembly will be
easier with 2 people.
Handy Hints
Regularly check and ensure
•
that all bolts and fittings are
tightend properly.
●Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
●From time to time check that
there are no loose screws on
this unit.
●This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
Care and maintenance
The maximum weight of the
children user: 50kgs.
Shelf (67 x 34.9cm)
1
Back (69.8 x 69.8cm)
5
15mm Screw x 22
Top & Bottom x 2 (67 x 34.9cm)
3
Wall strap x 1
I
12mm Screw x 1
J
26mm Screw x 1
G
Metal plate x 1
H
Unfinished edge
Unfinished edge
through hole
Unfinished edge
2
Top side
1
Assembly is complete.
c:
c: Assembly is
complete.
Self adhesive foot pads x 4
Screw nut x 12
b: Use screwdriver to
turn the screw nut make
the hole be aligned.
b:
BB
Top side
Bottom side
A
A
2
2
12
This parts should be the top shelf
D
2
Shelf x 3 (38.4 x 27.4cm)
C
Step Step 2
2
F
10
9
A
A
We do not
recommend the use
of power drill/ drivers
for inserting screws,
as this could damage
the unit. Only use hand
screwdrivers.
X 4
X 4
• Assemble all parts and bolts
loosely during assembly, only
once the product is complete
should you fully tighten the bolts

Components - Panels
Please check you have all the panels listed below
2
If you have damaged or missing components,
call the Customer Helpline Argos = 0345 6400800
Back panel - Right side x 1 (178.5 x 37.6cm)
9
Back panel - Left side x 1 (178.5 x 38.6cm)
10
Unfinished edge
Unfinished edge
Unfinished edge
Bottom panel x 1 (76.2 x 27.1cm)
1Top panel x 1 (78 x 29cm)
2
Unfinished edge
Shelf panel x 4 (75.3 x 27cm)
3Top Middle panel
5
x 1 (26.5 x 32.2cm)
Middle panel
4
x 4 (26.5 x 32.2cm)
Front apron x 1 (74.9 x 10cm)
6Side apron x 1 (24.2 x 10cm)
7
Unfinished edge
Unfinished edge
Side panel x 1 (178.5 x 28.8cm)
8
Unfinished edge
The maximum weight of the
children user: 50kgs.
Shelf (67 x 34.9cm)
1
Back (69.8 x 69.8cm)
5
15mm Screw x 22
Top & Bottom x 2 (67 x 34.9cm)
3
Wall strap x 1
I
12mm Screw x 1
J
26mm Screw x 1
G
Metal plate x 1
H
Unfinished edge
Unfinished edge
through hole
Unfinished edge
2
Top side
1
Assembly is complete.
c:
c: Assembly is
complete.
Self adhesive foot pads x 4
Screw nut x 12
b: Use screwdriver to
turn the screw nut make
the hole be aligned.
b:
BB
Top side
Bottom side
A
A
2
2
12
This parts should be the top shelf
D
2
Shelf x 3 (38.4 x 27.4cm)
C
Step Step 2
2
F
10
9
A
A
We do not
recommend the use
of power drill/ drivers
for inserting screws,
as this could damage
the unit. Only use hand
screwdrivers.
X 4
X 4
• Assemble all parts and bolts
loosely during assembly, only
once the product is complete
should you fully tighten the bolts

Components - Fittings
Please check you have all the panels listed below
Phillips screwdriver
(medium & large)
Ruler/tape
measure
Tools required
Ruler - Use this ruler to help correctly identify the screws
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170
26mm Screw x 1
G
Wall strap x 1
I
12mm Screw x 1
H
J
Wall plug x 1
45mm Screw x 40
A
Drill
D
Cam bolt x 4
30mm Wood dowel x 22
B
50mm Wood dowel x 8
C
E
Cam lock x 4
F
Cap x 11
3
The screws length is measured from the head to the point (30mm
screw shown).
hammer.)
The maximum weight of the
children user: 50kgs.
Shelf (67 x 34.9cm)
1
Back (69.8 x 69.8cm)
5
15mm Screw x 22
Top & Bottom x 2 (67 x 34.9cm)
3
Wall strap x 1
I
12mm Screw x 1
J
26mm Screw x 1
G
Metal plate x 1
H
Unfinished edge
Unfinished edge
through hole
Unfinished edge
2
Top side
1
Assembly is complete.
c:
c: Assembly is
complete.
Self adhesive foot pads x 4
Screw nut x 12
b: Use screwdriver to
turn the screw nut make
the hole be aligned.
b:
BB
Top side
Bottom side
A
A
2
2
12
This parts should be the top shelf
D
2
Shelf x 3 (38.4 x 27.4cm)
C
Step Step 2
2
F
10
9
A
A
We do not
recommend the use
of power drill/ drivers
for inserting screws,
as this could damage
the unit. Only use hand
screwdrivers.
X 4
X 4
• Assemble all parts and bolts
loosely during assembly, only
once the product is complete
should you fully tighten the bolts

Assembly Instructions
Step 1
Assembly the bottom.
a:
Step 1
a: Screw the cam bolt
onto panel and
insert the wood dowel
into .
1
6
b:
c:
E
E
E
E
b: Insert Cam lock into
side apron where shown.
Use a screwdriver to turn
Cam lock clockwise to
lock.
c: Attaching the apron
and bottom by
cam lock .
6
4
D
6
6
7
E
EE
E
E
7
E
B
7
E
1
1
B
B
D6
1
B
D
D
D
B
1
The maximum weight of the
children user: 50kgs.
Shelf (67 x 34.9cm)
1
Back (69.8 x 69.8cm)
5
15mm Screw x 22
Top & Bottom x 2 (67 x 34.9cm)
3
Wall strap x 1
I
12mm Screw x 1
J
26mm Screw x 1
G
Metal plate x 1
H
Unfinished edge
Unfinished edge
through hole
Unfinished edge
2
Top side
1
Assembly is complete.
c:
c: Assembly is
complete.
Self adhesive foot pads x 4
Screw nut x 12
b: Use screwdriver to
turn the screw nut make
the hole be aligned.
b:
BB
Top side
Bottom side
A
A
2
2
12
This parts should be the top shelf
D
2
Shelf x 3 (38.4 x 27.4cm)
C
Step Step 2
2
F
10
9
A
A
We do not
recommend the use
of power drill/ drivers
for inserting screws,
as this could damage
the unit. Only use hand
screwdrivers.
X 4
X 4
• Assemble all parts and bolts
loosely during assembly, only
once the product is complete
should you fully tighten the bolts

Assembly Instructions
Step 2
Attaching the panels.
a:
Step
a: Attaching the shelf
panel and middle
panel with 50mm
wood dowel .Beware
of use 30mm wood dowel
at bottom panel and side
of shelf.
Also, the direction and
position of top middle
panel .
5
3
4
C
C
50mm
wood dowel
X 8
X 7
B
30mm
wood dowel
3
3
3
3
4
4
4
4
5
1
45
Unfinished edge
Screw hole
Wood dowel hole
Screw hole
5
The maximum weight of the
children user: 50kgs.
Shelf (67 x 34.9cm)
1
Back (69.8 x 69.8cm)
5
15mm Screw x 22
Top & Bottom x 2 (67 x 34.9cm)
3
Wall strap x 1
I
12mm Screw x 1
J
26mm Screw x 1
G
Metal plate x 1
H
Unfinished edge
Unfinished edge
through hole
Unfinished edge
2
Top side
1
Assembly is complete.
c:
c: Assembly is
complete.
Self adhesive foot pads x 4
Screw nut x 12
b: Use screwdriver to
turn the screw nut make
the hole be aligned.
b:
BB
Top side
Bottom side
A
A
2
2
12
This parts should be the top shelf
D
2
Shelf x 3 (38.4 x 27.4cm)
C
Step Step 2
2
F
10
9
A
A
We do not
recommend the use
of power drill/ drivers
for inserting screws,
as this could damage
the unit. Only use hand
screwdrivers.
X 4
X 4
• Assemble all parts and bolts
loosely during assembly, only
once the product is complete
should you fully tighten the bolts

Assembly Instructions
Step 2
Attaching the panels.
Step
b: Attaching side panel
onto unit with
screw . Insert 30mm
wood dowel into shelf
.
8
b:
X 11
8
A
A
5
Unfinished edge
X 8
B
30mm
wood dowel
3
3
3
3
3
B
6
The maximum weight of the
children user: 50kgs.
Shelf (67 x 34.9cm)
1
Back (69.8 x 69.8cm)
5
15mm Screw x 22
Top & Bottom x 2 (67 x 34.9cm)
3
Wall strap x 1
I
12mm Screw x 1
J
26mm Screw x 1
G
Metal plate x 1
H
Unfinished edge
Unfinished edge
through hole
Unfinished edge
2
Top side
1
Assembly is complete.
c:
c: Assembly is
complete.
Self adhesive foot pads x 4
Screw nut x 12
b: Use screwdriver to
turn the screw nut make
the hole be aligned.
b:
BB
Top side
Bottom side
A
A
2
2
12
This parts should be the top shelf
D
2
Shelf x 3 (38.4 x 27.4cm)
C
Step Step 2
2
F
10
9
A
A
We do not
recommend the use
of power drill/ drivers
for inserting screws,
as this could damage
the unit. Only use hand
screwdrivers.
X 4
X 4
• Assemble all parts and bolts
loosely during assembly, only
once the product is complete
should you fully tighten the bolts

Assembly Instructions
c:
c: Fitting the back panels
onto unit with
screw . Beware of the
right side and left side.
And insert the wood dowel
into panel
.
d: Please ask someone
to help at this step.
Flip over the unit with
care.
d:
10
9
A X 11
A10
9
Finished edge
Step 2
Attaching the panels.
Step
7
X 3
B
30mm
wood dowel
B
B
8
B10
98
The maximum weight of the
children user: 50kgs.
Shelf (67 x 34.9cm)
1
Back (69.8 x 69.8cm)
5
15mm Screw x 22
Top & Bottom x 2 (67 x 34.9cm)
3
Wall strap x 1
I
12mm Screw x 1
J
26mm Screw x 1
G
Metal plate x 1
H
Unfinished edge
Unfinished edge
through hole
Unfinished edge
2
Top side
1
Assembly is complete.
c:
c: Assembly is
complete.
Self adhesive foot pads x 4
Screw nut x 12
b: Use screwdriver to
turn the screw nut make
the hole be aligned.
b:
BB
Top side
Bottom side
A
A
2
2
12
This parts should be the top shelf
D
2
Shelf x 3 (38.4 x 27.4cm)
C
Step Step 2
2
F
10
9
A
A
We do not
recommend the use
of power drill/ drivers
for inserting screws,
as this could damage
the unit. Only use hand
screwdrivers.
X 4
X 4
• Assemble all parts and bolts
loosely during assembly, only
once the product is complete
should you fully tighten the bolts

Assembly Instructions
e:
f: Put the cap
on screw.(only side
panel)
e: Fitting the top panel
onto unit with screw
.
2
f:
A
F
Step 2
Attaching the panels.
Step
2
A X 8
X 11
F
8
5
The maximum weight of the
children user: 50kgs.
Shelf (67 x 34.9cm)
1
Back (69.8 x 69.8cm)
5
15mm Screw x 22
Top & Bottom x 2 (67 x 34.9cm)
3
Wall strap x 1
I
12mm Screw x 1
J
26mm Screw x 1
G
Metal plate x 1
H
Unfinished edge
Unfinished edge
through hole
Unfinished edge
2
Top side
1
Assembly is complete.
c:
c: Assembly is
complete.
Self adhesive foot pads x 4
Screw nut x 12
b: Use screwdriver to
turn the screw nut make
the hole be aligned.
b:
BB
Top side
Bottom side
A
A
2
2
12
This parts should be the top shelf
D
2
Shelf x 3 (38.4 x 27.4cm)
C
Step Step 2
2
F
10
9
A
A
We do not
recommend the use
of power drill/ drivers
for inserting screws,
as this could damage
the unit. Only use hand
screwdrivers.
X 4
X 4
• Assemble all parts and bolts
loosely during assembly, only
once the product is complete
should you fully tighten the bolts

Assembly Instructions
Step 3
Fixing to wall
Assembly is complete.
It is recommended that the
is fixed to a
wall.
storage unit
Mark fixing hole on wall
and remove .storage unit
Fix wall strap to back
of storage unit using
screw .
With help, move
into position.
storage
unit
The
is heavy.
Lift with care.
storage
unit
Drill 7mm hole and insert
wall plug .
Before drilling, check wall
for hidden pipes
and cables.
Reposition
storage unit
and fix wall strap using
screw .
I
H
J
G
If you need help or have damaged or missing parts, call the Customer Helpline
Argos = 0345 6400800
Assembly Instructions
fi
I
J
G
H
I
9
The maximum weight of the
children user: 50kgs.
Shelf (67 x 34.9cm)
1
Back (69.8 x 69.8cm)
5
15mm Screw x 22
Top & Bottom x 2 (67 x 34.9cm)
3
Wall strap x 1
I
12mm Screw x 1
J
26mm Screw x 1
G
Metal plate x 1
H
Unfinished edge
Unfinished edge
through hole
Unfinished edge
2
Top side
1
Assembly is complete.
c:
c: Assembly is
complete.
Self adhesive foot pads x 4
Screw nut x 12
b: Use screwdriver to
turn the screw nut make
the hole be aligned.
b:
BB
Top side
Bottom side
A
A
2
2
12
This parts should be the top shelf
D
2
Shelf x 3 (38.4 x 27.4cm)
C
Step Step 2
2
F
10
9
A
A
We do not
recommend the use
of power drill/ drivers
for inserting screws,
as this could damage
the unit. Only use hand
screwdrivers.
X 4
X 4
• Assemble all parts and bolts
loosely during assembly, only
once the product is complete
should you fully tighten the bolts