Argos 831/9418 User manual

Simple Assembly Instructions - Please keep for future reference
IMPORTANT
1. Read these instructions carefully and
familiarise yourself with the procedure
before assembling the unit.
2. Check that you have all the component
parts following the list on the back
cover and familiarise yourself with
each part before proceeding.
3. Take all the fittings out of the plastic bag
and separate them into their groups.
4. Ensure you have enough space to lay out
all the parts before assembly.
Chrome Free Standing Toilet Roll Holder
Components
5. To avoid scratching it is recommended
that you assemble the unit on a soft
level surface.
Fittings
1 x Screw
A
1 x Tube
A
1 x Tool
D
1 x Thread Screw
B
1 x Washer
C
1 x Roll Holder
B1 x Roll Support
C
1 x Top Ring
D1 x Bottom Ring E
1 x Bottom Plate
F1 x Base
G
3-03

Assembly Instructions Assembly Instructions
Stage 2 – Finishing The Unit
Care and Maintenance
Stage 1 – Fitting The Base
fig. 1
fig. 2
fig. 3
fig. 4
fig. 5
fig. 6
C
A
B
1. Use the Screw Aand Washer
Cto fix the Base G into the
Bottom Plate F. 
See fig. 1.
Safety
To avoid any risk of suffocation to animals or children dispose of the plastic
bags immediately.
Fitting
From time to time please ensure there are no loose screws on the product.
Cleaning
As with all surfaces clean with a damp cloth and mild detergent, do not use bleach
or abrasive products.
2. Place the Bottom Ring E on the
unit. Then screw in the Tube A. 
See fig. 2.
3. Place the Roll Holder B into the
Roll Support C. 
See fig. 3.
1. Place the Top Ring D on the top
of the Tube. Then screw in the
Thread Screw B.
See fig. 4 .
2. Screw the Roll Support in the unit. 
See fig. 5.
F
G
E
A
C
B
D
3. Finally carefully place the unit in
the desired location. 
See fig. 6.