Argos Austen 804/3416 User manual

Austen
Spare Parts
www.argos-support.co.uk
Customer Support
[email protected]
0370 112 1928
0345 640 2020
Issue 1 - 20/03/20

Safety and Care Advice
Product Details
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough
space to layout the parts before
starting.
This product has been
constructed to be used in the
domestic environment only and
not for commercial purposes.
Care and maintenance
Only clean using a damp cloth
and mild detergent. Do not use
abrasive cleaners.
Use a dry cloth to clean the
product, furniture polish is
not recommended.
Assemble the item as close
to its final position (in the same
room) as possible.
Assemble on a soft level
surface to avoid damaging the
unit or your floor.
We do not
recommend the
use of power
drill/drivers for
inserting screws
as this could damage the unit.
Only use hand screwdrivers.
Parts of the assembly will be
easier with 2 people.
Dispose of all packaging
carefully and responsibly.
From time to time check that there
are no loose screws, nuts or bolts.
If there are please re-tighten.
This product should not be
discarded with household
waste.Take to your local
authority waste disposal
centre.
2
4‘6 Bed Black 804/3416 5‘ Bed Black 790/4769
Sainsbury's Argos is a trading name of both: Argos Limited, Registered office: 489-499 Avebury Boulevard, Milton Keynes, United Kingdom,
MK9 2NW, registered number: 01081551 (England and Wales); and Sainsbury's Supermarkets Limited, Registered
office: 33 Holborn, London, EC1N 2HT, registered number: 03261722 (England and Wales). Both companies are subsidiaries of J Sainsbury's plc.
4‘6 Bed Grey 790/4329 5‘ Bed Grey 796/8080
Important Ottoman Safety Warnings
Caution.This bed uses a pressurised mechanism.
Use caution when operating - Always use two hands at arm’s length, and only where illustrated on the
product.
You must ensure the mattress is on the bed frame before lifting the mechanism - Failure to do so may
result in injury.
Please ensure Children and pets are kept away from the bed when operating the bed mechanism.
If removing the mattress, make sure that the frame is secured as it could flip open.
Only use the storage compartment when when the frame is fully raised in the ‘up’ position.
No children or animals are left unattended when the frame is in the ‘up’ position.
Do not remain on the bed whilst the lifting mechanism is in use.
Beware of Entrapment - Keep both hands clear of mechanism when operating the mechanism.
When lifting the bed remove all bedding - Except the fitted sheet.
ENSURE MATTRESS IS ON
BEFORE LIFTING
DON'T LIFT WITHOUT MATTRESS

Fittings (Shown to scale)
3
B
8x25mm Bolt x 288x45mm Bolt x 8
5mm Allen key x 1
F
17mm Flat washer x 46
12mm Spring washer x 20
A
E
JK
Box spanner x 1
Spanner x 1
5x50mm Wood screw x 8
GH
4x45mm Wood screw x 16
D
8x30mm Bolt x 10
C
L
Nut x 6

1Right side rail (4'6-1930 × 310mm)(5'-2030 × 310mm)
2Left side rail (4'6-1930 × 310mm)(5'-2030 × 310mm) 3Headboard (4'6-1490 × 1000mm)
(5'-1640 × 1000mm)
4Footboard (4'6-1450 × 310mm)
(5'-1600 × 310mm)
5Hinge Mechanism (x 1 pair)
NOTE: PISTON ATTACHED
6Ottoman frame support x 1
(130 × 30mm)
7Fabric base x 1 (4'6-1960 ×1420mm)
(5'-2060 × 1570mm)
8Support Leg x 2 (25 × 240mm) 9Ottoman end frame (Headboard) x 1
(4'6-1363 ×85mm)(5'-1513 × 85mm)
NOTE:EXTRA HOLES
10 Ottoman end frame (Footboard) x 1
(4'6-1363 ×85mm)(5'-1513 × 85mm)
INSIDE
FRONT
INSIDE
INSIDE
11
12 Ottoman frame centre support x 1
(4'6-1822*30mm)(5'-1922*30mm)
13
Ottoman frame (Sides) x 2
(4'6-1822*30mm)(5'-1922*30mm)
Bentwood slats x 28 (4'6-675 x 9 x 53mm)
Bentwood slats x 30 (5'-750 x 9 x 53mm)
4
Parts

14 Double slat caps x 14 (4'6-55mm)
Double slat caps x 15 (5'-55mm)
15 Stretcher x 1 (4'6-1390 × 25mm)
(5'-1540 × 25mm)
16 Corner bracket x 4 (120 × 80mm) 17 Mattress support bracket x 2
18 Single slat caps x 28 (4'6-55mm)
Single slat caps x 30 (5'-55mm)
19 Feet x 2 (100 x 40mm)
20 Feet x 2 (100 x 40mm)
5
Parts

Ruler/tape
measure
Tools required
Allen key (Supplied)
Spanner (Supplied)
6
Phillips screwdriver
(small & medium)
Box spanner (Supplied)

A
FH
3
4
G
F
B
G
F
B
6
A
F4
7
1
2
8x25mm Bolt x 8
B
17mm Flat washer x 8
F
12mm Spring washer x 8
G
H
5mm Allen key x 18x45mm Bolt x 2
A
17mm Flat washer x 2
F
Leave screws loose
B
8x25mm Bolt x 288x45mm Bolt x 8
5mm Allen key x 1
F
17mm Flat washer x 46
12mm Spring washer x 20
A
E
J K
Box spanner x 1
Spanner x 1
5x50mm Wood screw x 8
G H
4x45mm Wood screw x 16
D
8x30mm Bolt x 10
C
L
Nut x 6

H
3
1
B
a:
b:
1
15
D
1
3
16
D
Holes at
headboard end
3
4
1
2
1
2
15
3
4
8
3
4
Do not fully tighten fixings!
H
5mm Allen key x 1
J
4x45mm Wood screw x 16
D
Ensure frame is square
16
4x

7
J
19
J
20
J
20
J
19
9
5
6J
5x50mm Wood screw x 8
J
Turn
Product
Velcro fastening

C
FH
1
5
2
5CF
8
12
F
B
H
10
7
8
H
5mm Allen key x 18x30mm Bolt x 10
C
17mm Flat washer x 10
FTurn
Product
8x25mm Bolt x 4
B
17mm Flat washer x 4
FH
5mm Allen key x 1
Beware of risk of entrapment
from folding hinges!
Shown upside down