Argos 832/8076 User manual

3 Door Mirror Cabinet
Assembly Instructions -
Please keep for future reference 832/8076
Dimensions
Depth - 14cm
Width - 59.2cm
Height - 37.4cm
Important - Please read these instructions fully before starting assembly
Version 3 Date: 20/06/14
If you need help or have damaged or missing parts, call the Customer Helpline:
Argos = 0345 6400800

BS 7449:1991
Model / Catalogue Number: 832/8076
Retailer: ARGOS
Retailer address:
489-499 Avebury Boulevard, Saxon Gate West, Central Milton Keynes, Bucks, MK9 2NW
WARNINGS
• Do not place very hot or very cold items against or in close proximity to glass surface unless an adequately
thick insulating material is used to prevent such items from coming into contact with the glass.
• Do not strike the glass with hard or pointed items.
• Do not sit or stand on the glass surface, as this would be hazardous.
• When cleaning the glass use a damp cloth or chamois leather with washing up liquid.
•Do not use washing powders or any other substances containing abrasives since these substances will scratch
the glass.
• It is essential that you follow the Wall Fitting Guide provided since houses have differing types of walls. Failure
to follow this guide could result in a hazard. If in doubt consult a qualied tradesperson.
NOTE:
This unit contains safety lm backed mirror of a nominal thickness of 3mm, which is not required to be
classied to BS6206 Class C. If the mirror is chipped or broken, replace with mirror of the type described on
this label. Consult the furniture retailer or agent with regard to obtaining a manufacturing specication of the
shape for replacement mirror quoting the model number, and batch number or date of manufacture of this
item.
Warning
Important - Please read these instructions fully before starting assembly

1
Note: if required the next
page can be cut out and used
as reference throughout the
assembly. Keep this page with
these instructions for future
reference.
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
the following pages.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• During assembly do not stand
or put weight on the product,
this could cause damage.
• Assemble the item as close
to its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
• To reduce
the likelihood of
damaging your
product please
ensure that your
power drill is set on a low torque
setting.
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
Care and maintenance
Skin contact: Remove
contamination by washing with
soap and water. This procedure
should also be followed prior to
eating and drinking.
Eye contact: Rinse immediately
with clean water for 15 minutes
and seek medical advice.
If swallowed: Seek medical
advice immediately.
Glue safety - Take care when using glue, please follow the advice below
• Assemble all parts and bolts
loosely during assembly, only
once the product is complete
should you fully tighten the bolts
• Regularly check and ensure
that all bolts and fittings are
tightend properly.
Handy Hints

2
Top panel (59.1 x 14cm)
1
Bottom panel (59.1 x 14cm)
2
Left side panel (34.3 x 11.8cm)
3
Right side panel (34.3 x 11.8cm)
4
Middle left side panel (34.3 x 11.8cm)
5
Middle right side panel (34.3 x 11.8cm)
6
Side back panel x 2 (28.7 x 18.3cm)
7
Middle back panel (35 x 18.3cm)
8
Glass door x 3 (33.7 x 19.1cm)
9
Shelf x 3 (17.6 x 10.7cm)
10
Back support x 2 (17.6 x 6.3cm)
11
Pilot holes for guidance only
Components - Panels
Please check you have all the panels listed below
If you have damaged or missing components, call the
Customer Helpline:
Argos = 0345 6400800

3
Note: The quantities below are the correct amount to complete the assembly. in some cases mor
may be supplied than are required.
Components - Fittings
ABC
D
Q
30mm Dowel x 8
JK
Glue x 1
50mm Screw x 16
40mm Screw x 4
E
L
Wall plug x 4
M
12mm Screw x 15
Door hinge x 6
G
Shelf support x 12
H
Support cover x 12
F
Hinge plug x 3
I
J
Metal plate x 3
Door magnet x 3
Screw cover x 20
Ruler - Use this ruler to help correctly identify the screws
Tools required
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 115 120 125 130 135 140 145 150 155 160 165 170
105
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
0 1 2 3 4 5 6
Phillips screwdriver
(medium & large)
Small
hammer
Ruler/tape
measure
Drill
Eye protection
(when using a
hammer or glue)
The screws length is measured from the head to the point (30mm screw shown).
7mm Suitable drill bit
(for use with wall plug)

4
Assembly Instructions
Step 1
c:
a:
b:
11
6
4
5
3
7
7
6
4
11
11
11
5
3
11
c:
Place a small amount of
Glue into the grooves on
the unit.
Carefully slide the Side
back panels into the
unit.
K
7
b:
Attach Middle right side
panel and Right side
panel onto the Back
support .
Attach Middle left side
panel and Left side
panel onto the Back
support .
A
A
Attaching back
supports
A
a:
Insert Dowels into
the Back supports .
11
K
X 2
K
K
6
45
3

Step 2
Assembly Instructions
5
a:
b:
F
F
F
c:
F
c:
Place a small amount of
Glue into the grooves on
the
unit.
Carefully slide the Middle
back panel into the unit.
K
a:
Insert Hinge plugs
into the Bottom panel .
Attaching bottom panel
2
D
M
D
M
D
D
D
D
D
D
M
MM
MM
M
2
2
K
Left side panel , Middle
left side panel , Middle
right side panel and
Right side panel onto
the Bottom panel .
Use Screw covers to
cover the screw heads.
3
b:
Place a small amount of
Glue into the groove of
Bottom panel .
K
D
3
5
6
4
5
6
4
2
M
K
8
2
8
K

6
Assembly Instructions
a:
Step 3
Step 4
b:
H
+
G
G
H
Attaching shelves
a:
SIide Support covers
onto Shelf supports .
lnsert Shelf supports
(Support covers are
included) into the unit.
before inserting the Shelves.
HG
G
H
b:
Slide the Shelves into
the unit.
10
Note:
Set the shelf
supports to the desired
height.
10
10
10
B
I
I
I
I
B
B
B
1
Attaching top panel
Door magnets onto the
Top panel .
B
I
1
a:
a:
Continued on next page.

Step 4 - continued
Assembly Instructions
9
9
9
1
D
M
D
M
D
M
D
M
D
M
D
M
D
M
D
M
Top panel onto the
unit.
Use Screw covers to
cover the screw heads.
1
d:
Place a small amount
of Glue into the groove
of Top panel .
K
D
M
1
7
d:
c:
K
b:
9
E
E
J
B
x 3
b:
Metal plates onto the
Glass doors .
Insert the Door hinges
into the Glass doors .
B
9
J
E
9
E
F
c:
Carefully place the Glass
doors onto the unit,
locating the Door hinges
into the Hinge plugs .
9
E F
•Do not place very hot or very cold items
against or in close proximity to glass
surface unless an adequately thick
insulating material is used to prevent
such items from coming into contact with
the glass.
• Do not strike the glass with hard or
pointed items.
•Do not sit or stand on the glass surface,
as this would be hazardous.
• When cleaning the glass use a damp
cloth or chamois leather with washing up
liquid.
• Do not use washing powders or any
other substances containing abrasives
since these substances will scratch the
glass.
• It is essential that you follow the Wall
Fitting Guide provided since houses have
differing types of walls. Failure to follow
this guide could result in a hazard. If in
WARNING:
B
J
E

Assembly Instructions
It is recommended that the
wall.
With help, move mirror
cabinet into position.
remove mirror cabinet .
Fixing to wall
Warning:
The mirror cabinet is
heavy.
Lift with care.
Warning:
Before drilling,
check wall for
hidden pipes and
and cables.
8
Note: Before use allow
the Glue to dry for 24
hours and make sure
the unit is secure.
Back panel
Wall
C
L
M
Drill a hole and insert Wall
plug .
L
Reposition mirror cabinet
and use Screws through
the unit into the wall plug.
Use Screw covers to
cover the screw heads.
C
M
Note: Wall plugs supplied are
for solid wall only.
be used for your wall, seek
professional advice if in doubt
Step5
CL
M
Assembly is complete.
If you need help or have damaged or missing parts, call the Customer Helpline:
Argos = 0345 6400800