Argos 833 /3559 User manual

White Double Mirrored Cabinet
Assembly Instructions - Please keep for future reference 833 /3559
Dimensions
Width - 50cm
Depth - 13cm
Height - 60cm
Important - Please read these instructions fully before starting assembly
Issue 1 - 03/11/10

Safety and Care Advice
Important -Please read these instructions fully before starting assembly
Check you have all the
components and tools listed on
page 2.
Remove all fittings from the
plastic bag and separate them
into their groups.
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough
space to layout the parts before
starting.
Do not stand or put weight on
the product, this could cause
damage.
Assemble the item as close
to its final position (in the same
room) as possible.
Assemble on a soft level
surface to avoid damaging the
unit or your floor.
Parts of the assembly will be
easier with 2 people.
We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
Dispose of all packaging
carefully and responsibly.
Care and Maintenance
From time to time check that
there are no loose screws on
this unit.
Only clean using a damp cloth
and mild detergent, do not use
bleach or abrasive cleaners.
This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
Safety Warning Information - Keep these instructions for future use
Do not place very hot or very
cold items against or in close
proximity to glass surface
unless an adequately thick
insulating material is used to
prevent such items from
coming into contact with the
glass.
Do not strike the glass with
hard or pointed items.
Do not sit or stand upon
horizontal glass surfaces.
When cleaning glass panels
or mirrors use a damp cloth or
leather with washing up liquid
or soft soap if necessary; do
not use washing powders or
any other substance
containing abrasives since
these substances scratch
glass.
1
It is essential that this
unit is fixed to a wall with
the fixings provided.
This unit complies with
Catalogue Number: 833 /3559
Manufacture Date: 10.12.10
Retailer: Argos
489-499 Avebury Boulevard
Saxon Gate West
Central Milton Keynes
Bucks, MK9 2NW
Retailer Address:
Warnings
BS 7449 : 1991
This unit contains mirror of
a nominal thickness of 3mm,
which is not required to be
classified to BS6206 Class C.
If a glass is chipped or broken
replace with glass of the type
described on this label.
Consult the manufacturer,
retailer, or agent with regard to
obtaining a manufacturing
specification and shape for
replacement glass quoting the
model number, and batch
number or date of manufacture.
The maximum safe load
for this unit is 10kg evenly
distributed.

Components - Panels
Please check you have all the components listed below
1Left Side (60x13cm)
2
Components - Fittings
Please check you have all the fittings listed below
D
BC
Tools required
Phillips screwdriver (medium)
Drill
6mm Suitable drill bit
(for use with wall plug)
Door Hinge x 4 Locking Nut x 8 Shelf Holder x 8 Locking Pin x 8
EFGH
Wall Plug x 2
(for solid walls only)
11.6mm Screw x 24 45mm Screw x 2Wooden Dowel x 6
2Right Side (60x13cm)
3Top Panel (47x11cm) 4Bottom Panel (47x11cm)
5Shelf Panel x 2 (47x9.1cm) 6Back Support (47x4.2cm)
7Left Door (60x23.3cm) 8Right Door (60x23.3cm) 11 Plastic Bar x 2 (47cm)
9Top Back (48x19.2cm)
10 Bottom Back x 2 (48x19.2cm)
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may
be supplied than are required.
A

Assembly Instructions
Step 1
Attaching panels
Position Right Side Panel
on the floor, with
holes on the top. Ensure
you place on a carpet or
protective surface to
avoid scratching.
Step 2
Attaching panels
Screw 2 Locking Pins
into the holes on the
Right Side Panel
firmly, then attach
Top Panel to the
Locking Pins .
Insert 2 Locking Nuts
into the holes on the
Top Panel where
shown. Use a screwdriver
to turn Locking Nuts
clockwise to lock.
Firstly, insert 6 Wooden
Dowels into Back
Support .
Attach Back Support
to Right Side Panel
and Top Panel by
inserting dowels into
holes where shown.
2
3
B
2
D
6
E
2
3
6
3
D
2
3
D
3
Screw 2 Locking Pins
into the holes on the
Right Side Panel
firmly, then attach
Bottom Panel to the
Locking Pins .
Insert 2 Locking Nuts
into the holes on the
Bottom Panel where
shown. Use a screwdriver
to turn Locking Nuts
clockwise to lock.
D
2
4
6
E
D
B
B
4
6
2
3
B
B
4
D
B

Assembly Instructions
Step 3
Attaching back panels
Step 4
Attaching panel
9
10
10
11
11
4
As per the image to
insert Top Back ,
Bottom Backs and
Plastic Bars into the
slots on the top, bottom,
side panels one by one.
Always make sure they
are firmly.
1
BB
D
43
6
E
D
10
9
11
Screw 4 Locking Pins
into the holes on the Left
Side Panel firmly,
then attach the panel to
the Top Panel and
Bottom Panel , also
ensure the Wooden
Dowels on the top of
Back Support insert
into the correct holes,
and the back panels
inserted into the slot on
the Left Side Panel
firmly.
Insert 4 Locking Nuts
into the holes on the
Top Panel and Bottom
Panel where shown.
Use a screwdriver to turn
Locking Nuts
clockwise to lock.
D
E
4
1
3
6
1
4
3
B
B

Assembly Instructions
Step 5
Attaching panels
Insert 8 Shelf Holders
into the holes on the side
panels where shown.
Step 6
Fitting Door Hinges
Firstly, as per image a: to
fix one head of Door
Hinges to the Left Door
and Right Door
firmly using Screws .
Use Screws to fix the
other head of Door
Hinges to the side
panels firmly.
Place 2 Shelf Panels
onto the assembled Shelf
Holders .
5
Note: There are
adjustable holes on the
side panels for shelf
panels can adjust to any
height.
C
C
a: F
A
AF
AF
7
A
F
F
8
C
C
5
Hinge adjustment:
To move doors left or
right: as per image c: to
loose screw shown and
move doors to suit.
Re-tighten screws.
c:
CAUTION:
When handling
mirror door always take
extra care. Ensure no
children are in the
assembly area.
5
A
78
F
A
F
5
A

Assembly Instructions
Step 7
Fixing to wall
NOTE: It would be
useful to ask someone to
help you at this stage.
WALL MOUNTING: Hold
the fully assembled unit
against the wall in the
desired location and
check if it is horizontal.
Mark the wall to indicate
where to drill the holes.
Always remember to
“Measure twice,drill
once”.
IMPORTANT: When
drilling into walls always
check that there are no
hidden wires or pipes ect.
Make sure that the
screws and wall plugs
supplied are suitable for
supporting the unit.
Consult a qualified
tradesperson if you are
not sure.
NOTE: Before use always
make sure the unit is
secure.
Assembly is complete.
Insert Wall Plugs into
the holes. Then screw in
the Wall Screws
through the holes on the
Top Back into the Wall
Plugs to fix firmly.
H
G
H
9
9
G

A Guide to - Wall Mounting & Fixings
Revision 2 - 7/10/09
Important note:
Types of walls
Care &
Maintenance
No.1 “General Purpose” wall plug
No.6 “Shield Anchor” wall plug
Heavy loads
No.3 “Cavity Fixing” wall plug
No.4 “Cavity Fixing-Heavy Duty”
wall plug
No.5 “Hammer Fixing” wall plug
No.2 “Plasterboard” wall plug
Generally aerated blocks should not
be used to support heavy loads, use
a specialist tting in this case. For light
loads, general purpose wall plugs can
be used.
For use with heavier loads such as TV
& HiFi speakers and satelite dishes etc.
For use with plasterboard partitions or
hollow wooden doors.
For use when tting or supporting
heavy loads such as shelving, wall
cabinets and coat racks.
For use with walls stuck with
plasterboard. The hammer xing allows
it to be xed to the wall rather than the
plasterboard. Always check the xing
is secure to the retaining wall.
For use when attaching light loads on
to plasterboard partitions.
Safety: Always check the fitting
and location to ensure your safety
in and around the home.
Fitting: From time to time check
the fitting to ensure the wall plugs
or screws do not become loose.
You can use one of the following types of wall plug if your walls are made
of brick, breeze block, concrete, stone or wood.
Important: When drilling into walls always
check that there are no hidden wires or pipes etc.
Hints:
1: General rule: Always use a larger screw and wall plug
if you are not sure.
2: Ensure you use the recommended drill bit to match the wall
plug and hole size.
3: Ensure you drill the hole horizontally, do not force the drill or
enlarge the hole.
4: Take extra care when drilling high walls, ceilings and ceramic
tiles. Ensure wall plugs are inserted beyond the thickness of
the ceramic tiles to avoid the tiles splitting or cracking.
5: Ensure wall plugs are well tted and are a tight t in the
drilled hole.
If plastic wall plugs
are supplied with your
product:
Make sure that the screws and wall plugs being used
are suitable for supporting your unit. Consult a qualified
tradesperson if you are unsure.
- these are only suitable for
use in masonry walls.
If you are in any doubt about
the correct wall plugs for
your wall, seek professional
advice.
Failure of the product due to
using incorrect xings is the
responsibility of the installer.