Argos Antique 7587430 User manual

Antique midsleeper chest+desk combi
Dimensions
Length - 82,5/96cm
Depth - 37/60cm
Height - 72/74,6cm
Weight - 29,5kg
Issue 1 - 19/11/14
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline:
0045 7668 8055 or e-mail: order@flexa.dk
Assembly Instructions - Please keep for future reference 7587430

1
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
pages 2 and 3.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close
to its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could
damage the unit. Only use hand
screwdrivers.
• Dispose of all packaging
carefully and responsibly.
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
Care and maintenance
Note: if required the next
page can be cut out and used
as reference throughout the
assembly. Keep this page with
these instructions for future
reference.

Drawer front x4
(76.1x15.7x1.5cm)
9
Drawer side left x4
(33x11.5x1.3cm)
3
Components - Parts
Please check you have all the parts listed below
Top x1 (82.5x37x1.5cm)
5
No. 12-01303303
2
Side panel Right x1
(70.6x35x1.5cm)
2
No. 15-01507061-7
Back panel x1
(78.2x64.8/32.4x0.3cm)
6
No. 4309-0307821
No. 15-01507611-7
Side panel Left x1
(70.6x35x1.5cm)
1
No. 15-01507062-7
Plinth x2 (76.5x6.5x1.5cm)
8No. 12-01507651-7
Drawer base x4
(74.2x32.5x0.3cm)
7
No. 4309-030742
Drawer back x4
(73.1x11.5x1.3cm)
10
No. 12-01307312
If you have damaged or missing components,
call the Customer Helpline: 0045 7668 8055
Drawer side right x4
(33x11.5x1.3cm)
4
No. 12-01303302 No. 15-01508252-7

Please check you have all the fittings listed below
7x34mm for ø5 Minifix bolt x26
A
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
ø15x9.5mm Minifix cam x26
B
E
5x30 mm Dowel x10
C
D
Components - Fittings
3
F
1.2x20mm Nail square x25
No. 4022-006
31x1.7x1.0 Drawer runner x8
H
4.0x40mm Chipboard screw x8
No. 3903-40040
J
3.5x35mm Chipboard screw x16
i
ø9.5/M4x9mm Machine screw x 8
No. 3901-35035 No. 3912-04009 K
ø5.8x11mm Euro screw x16
No. 3907-58011
Tools required
Phillips
screwdriver
(medium)
Allen key
4mm incl.
Flatblade
screwdriver
(medium)
Small
hammer
Ruler/tape
measure
Eye protection
(when using a
hammer or glue)
No. 4033-004
ø38mm Knob x8
No. 4001-018-7
No. 3930-05030
No. 4010-004
No. 3933-15010
No. 4020-005

4
Assembly Instructions
Step 1
Step 2
Attach the dowels Cto
the plinth 8and the side
panels 1and 2.
It may be necessary
to tap the dowels in
very gently with a small
hammer.
Attach minifix bolts Ato
side panels 1and 2.
Attach the drawer
runners Dto the side
panels 1and 2with
euro screws K.
Be aware of the forward
end!
12
12
8x2
A
AA
C
C
C C
D
D
K
K
K
K
K
K
K
K
D
D D
D D
D
K
K
K
K
K
K
D
K
K
K
K
Front edge
Front edge
Left side Right side
Front edge
A
C
K

Assembly Instructions
Step 3
Attach the plinths 8to
the side panels 1and
2with the minifix cams
B.
Attach minifix bolts Ato
the top 5.
5
Step 4
5
1
2
8
8B
B
A
A
B
A

Assembly Instructions
Step 5
Attach the top 5to the
side panels 1and 2
with the minifix cams B.
Attach the back panel 6
with nails Fto the back
side of the chest.
Nail the back panel 6
to the carcass, ensuring
that there are NO GAPS
between the left hand
side and the back panel
6, NOR between the
top 5and the back
panel 6.
Step 6
6
6
5
1
2
B
B
F
B
F

Assembly Instructions
Step 7
Attach the knobs Eto
the drawer front 9with
chipboard screws H.
Attach the minifix bolts A
to the drawer front 9.
Repeat for all four drawer
fronts.
Attach the drawer sides
3and 4to the drawer
front 9with the minifix
cams B.
Repeat for all four
drawers.
Push the drawer base 7
carefully into the drawer.
Attach the drawer back
10 to the drawer sides
3and 4with the
screws i.
Repeat for all four
drawers.
7
Step 8
Step 9
x4
x4
x4
9
9
4
3
9
7
4
3
10
E
E
H
H
A
A
B
B
i
i
A
H
B
i

Assembly Instructions
Attach the drawer to the
drawer runners Dwith
the euro screws Jinside
to the drawer sides 3
and 4.
Repeat for all four
drawers.
The height/distance
between the drawer
fronts, can be slightly
adjusted by loosening 4
minifix cams Binside
the drawer. Push/pull the
drawer front up/down and
retighten.
Assembly is complete.
Step 10
8
3
4
J
J
J
3

Components - Parts
Please check you have all the parts listed below
Side panel right x1
(70.9x17.0x1.5cm)
No. 15-01507091-7
10 Back panel x1
(69.0x54.6x0.3cm)
No. 4305-030690-7
11 Side panel left x1
(70.9x17.0x1.5cm)
No. 15-01507093-7
12
Table top x1
(95.9x60.0x1.5cm)
No. 15-01509591-7
16
Support rail for desk x2
(51.0x2.8x1.9cm)
No. 12-01905101
15
Base x2
(53.4x15.2x1.5cm)
No. 15-01505341-7
13 Guide list desk x2
(94.2x4.0x3.2cm)
No. 12-03209422-7
14
9
If you have damaged or missing components,
call the Customer Helpline: 0045 7668 8055

10
Please check you have all the fittings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
Components - Fittings
ø15x24mm Spacer plastic x1
ONo. 3940-000241
ø7x34mm Minifix bolt x6
A
ø15x9,5mm Minifix cam x6
BNo. 3933-15010 CNo. 3930-05030
1,2x20mm Nail square x25
FNo. 4022-006 5x30mm Dowel x4
4,0x40mm Chipboard screw x8
No. 3901-40040
No. 4020-005
G
MNo. 4003-002 ø4x40mm Chipboard screw x1
HNo. 3903-40040
LNo. 3901-45060
ø4,5x60mm Chipboard screw x4
NNo. 3908-70040
ø7x40mm Confirmat screw x8
PNo. 3902-40015
ø4x15mm Chipboard screw x4
ø26x29mm Castor x2
Tools required
Phillips
screwdriver
(medium)
Allen key
4mm incl.
Flatblade
screwdriver
(medium)
Small
hammer
Ruler/tape
measure
Eye protection
(when using a
hammer or glue)
No. 4033-004

11
Assembly Instructions
Step 11
Attach the support rails
15 to the table top 16
with screws G.
Attach the minifix bolts A
to the table top 16 .
Attach the dowels Cto
the side panels 12 and
10 by tapping carefully.
Attach the bases 13 to
the sidepanels 12 and
10 with the screws N.
Step 13
Step 12
15
G
G
16
C
C
C
12 10
12
N
15
G
A
A
A
N
N
N
N
10
13
13

12
Assembly Instructions
Step 14
Attach the table top 16 to
the shelf side panels 10
and 12 with the minifix
cams B.
Attach the back panel 11
to the base 13 and to the
support rail 15 with nails
F.
Attach the castors M
to the base 13 with the
screws P.
Step 15
Step 16
15
13
B
16
B
16
12
F
10
10
11
15
13
F
F
P
P
M
M
PM

13
F
Assembly Instructions
Step 17
Attach the guide list 14
under the bedside into
the legs with the screws
L.
Attach the table top 16 to
the guide list 14 .
Attach the other guide list
14 to the bedsides 16
with the screws L.
Attach the spacer Oto
the table top 16 with the
screw Hto prevent the
table from falling down.
Assembly is complete.
Step 18
If you need help or have damaged or missing parts, call the Customer Helpline: 0045 7668 8055
E-mail: order@flexa.dk
Ref.no. 44-01443-7 A Stand: 191114 Page 14 (81-09707-7)
L
14
L
L
16
L
O
L
H
H
14
O