Argos Arizona 541/9517 User manual

Arizona Pair of Solid Pine Chairs
Assembly Instructions - Please keep for future reference
Issue 1 - 05/04/16
Dimensions
Width - 44.5cm
Depth - 50cm
Height - 105cm
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline:
Argos = 0345 640 0800
541/9517

1
• Check you have all the
components and tools listed on
the following pages.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• During assembly do not stand
or put weight on the product, this
could cause damage.
• Assemble the item as close to
its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
• Unit weight: 5.4 kgs.
• Maximum safe weight of user:
110kgs.
Safety and Care Advice
Important - Please read these instructions fully before starting assembly
Care and maintenance
Handy Hints
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• Do not stand on the chair.
• Do not use this chair as step
ladder.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
• Assemble all parts and bolts
loosely during assembly, only
once the product is complete
should you fully tighten the
bolts.
• Regularly check and ensure
that all bolts and fittings are
tightend properly.

2
Components - Parts
Please check you have all the parts listed below
Left leg frame
(45 x 4.5 x 105cm)
1
Backrest x 2 (29.5 x 7.8 x 1.8cm)
4
Back seat rail (29.5 x 5 x 1.8cm)
5
Seat (44.5 x 42.5 x 2.3cm)
3
Right leg frame
(45 x 4.5 x 105cm)
2Stretcher
(33.8 x 3 x 1.8cm)
7
Components - Fittings
Please check you have all the fittings listed below
M7 x 70mm Bolt x 10 Screw x 4 Wood dowel x 12
Note: The quantities below are the correct amount to complete the assembly of 1 chair. In some cases more
fittings may be supplied than are required.
AC B
If you have damaged or missing components, call the
Customer Helpline: Argos = 0345 640 0800
D
Allen key x 1
E
Foot Pads x 4
Ruler - Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 115 120 125 130 135 140 145 150 155 160 165 170
105
Front seat rail (33 x 5 x 1.8cm)
6
Tools required
Crosshead screwdriver

3
Assembly Instructions
Smaller
holes up
Smaller
holes up
Step 1
Fitting dowels
Insert wooden dowels
into holes on the
backrests , back seat
rail and front seat rail
as shown.
Step 2
Attaching back rest and
seat rails
Position the backrests
, back seat rail ,
and front seat rail on
the right leg and insert
the wooden dowels
into holes as shown.
Important:
Make sure to
position the back
seat rail and
front seat rail
with the smaller
screw holes up
as shown.
Step 3
Attaching left leg
Carefully position the left
leg as shown and with
a help holding the rails
and back rest, attach the
left leg by inserting the
wooden dowels into
holes as shown.
C
CC
C
C
C
C
C
C
C
C
C
C
C
C
4
44
44
4
4 5
6
5
6
2
4
5
6
4
4
5
5
6
6
5
6
2
1
1
2
C

4
Assembly Instructions
a: A
4
1
AA
A
A
A
44
5
6
7
1
Back
Front
b:
A
7
7
1
1
Step 4
Securing the leg frames
a: Secure the leg frame
using bolts as shown
and tighten using allen
key but do not fully
tighten at this stage.
b: Attach the stretcher
between the legs and
as shown and secure
using bolts .
Fully tighten bolts using
allen key .
Important:
Make sure to
position the
stretcher at an
angle as shown
in the inset
diagram.
c: Carefully turn the
chair frame on the other
side to secure the leg
frame and the
stretcher using bolts
as shown and tighten
using allen key .
c:
A
A
AA
A
A
A
A
D
D
D4
4
4
5
6
7
7
7
1
2
A
2
2
2

If you need help or have damaged or missing parts, call the Customer Helpline:
Argos = 0345 640 0800
B
B
B
B
E
E
E
E
5
6
21
3
B
5
3
Assembly Instructions
Attaching seat
Position the seat panel
face down on a flat and
raised surface such as a
table.
Position the chair frame
on the seat as shown
then fix the back seat rail
and front seat rail
to seat panel using
screws .
Tighten screws using a
crosshead screwdriver.
Carefully position the
chair frame upright.
Assembly is complete.
Step 5
B
5 6
3
3
E
2
Remove backing from
foot pads and carefully
position on the bottom of
the left leg frame and
right leg frame as
shown.
G
1
2
5