Argos hygena 464/3597 User manual

Issue 1-29-10-15
Width - 120cm
Depth - 38cm
Height - 52.5cm
Ivy TV Stand
464/3597
hygena

Do not stand or put excessive
weight on the product, this
could cause damage.

2
0345 6400 800
(120x37.7x1.5cm)
Top panel
(120x37.7x1.5cm)
Base panel
(30x37.7x1.5cm)
Side panel x 2
(30x37.7x1.5cm)
Divider (right) x 1
(35.5x29.4x1.5cm)
Drawer front x 1
(35x21.5x1.2cm)
Drawer side panel (left) x 2
(35x21.5x1.2cm)
Drawer side panel (right) x 2
(31x23x1.2cm)
Drawer back
(34.5x33.5x0.5cm)
Drawer base
(30x37.7x1.5cm)
Divider (left) x 1
Underside
Underside

3
0345 6400 800
(119.8x32.8x0.3cm)
Back panel
Legs x 5
(38.7x37.7x1.5cm)
Shelf x 2
Underside

0345 6400 800
B C
4
A
Ruler - Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170
Components - Fittings
E FD
HJ G
L MK
Wooden dowel x 16
Handle x 1 M4 x 16mm Screw x 2
Shelf support pin x 8
Drawer runners 1 set
3 x 12mm Screw x 24 M6 x 12mm Screw x 25
3.5 x 12mm Screw x 12
4 x 30mm Screw x 4
Metal dowel x 20 Small locking nut x 4
Large locking nut x 16
Tools required
0
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150
123456Ruler/tape
measure Phillips screwdriver
(Not supplied)

Assembly lnstructions
5
Preparing panels
Place top panel , base
panel and drawer front
flat on the floor with
the fixing holes facing up.
Screw metal dowels
into each panel as shown.
Note: Screw metal dowels
as far as shown.
Insert wood dowels
into top panel and
base panel as shown.
Carefully locate left and
right side panels , left
divider and right
divider onto top panel
in the locations shown.
Insert large locking nuts
into side panels and
dividers and .
Turn locking nuts
clockwise to secure.
6
3
1
2
A
2
A
A
4
5
B
3
45
AD
A
D
A
A
2
61
3
5
4
3
1
B
B
B
Shown upside down
D
1
2
Right
Left
B
1

Assembly lnstructions
6
Assembling base panel
With help, carefully locate
base panel into
position as shown.
Insert large locking nuts
into side panels and
dividers and .
Turn locking nuts
clockwise to secure.
Assemble legs to base
panel using screws .
B
2
3
5
4
M
14
B
Shown upside down
M
14
2
2
2
B
B
B
B
3
5
4
3

Assembly lnstructions
7
Assenbling back panel
With help, carefully turn
the unit onto it's front.
Note: Ensure the unit is
straight and square.
Place back panel into
the recess around the
back of the unit. Secure
using screws .
Note: Ensure the
un-finshed side of back
panel is facing out as
shown.
With help, stand the unit
upright onto it's legs.
Attach one half of drawer
runners onto dividers
and as shown.
Secure with screws .
Note: The correct fixing
hole positions are shown in
the enlarged drawings.
F
11
G
11
L
4
L
45
4
5
G
F
F
11
G
G
Unfinished side
4
5

Assembly lnstructions
Assembling drawer
a: Locate drawer back
in between drawer side
panels and . Secure
using screws .
b: Place drawer base
into the grooves in back
panel .
c: Locate drawer front
onto the drawer body.
Insert small locking nuts
into drawer side and
.
Turn locking nuts
clockwise to secure.
d: Locate the other half of
drawer runners onto
each side of drawer with
the rollers at the back.
Secure using screws .
e: Attach drawer handle
to drawer front using
screws .
7
10
a:
b:
c:
d:
e:
9
8
E
6
F
H
J
6
8
7
98
10
E
C
C
6
G
F
G
G
F
H
J
9
9
7
8
C
G
Roller
78

Assembly lnstructions
9
Locating drawer
Carefully slide drawer into
position as shown.
Insert shelf support pins
into side panels and
dividers and at the
desived height.
Carefully locate shelves
onto the support pins.
3
K
45
12
12
12
K
35
4
3