Argos Haversham User manual

Haversham - 2 Drawer Coffee Table
159/7127
Assembly Instructions
- Please keep for future reference
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400 800
Important – Please read these instructions fully before starting assembly
Dimensions
Width - 105cm
Depth - 55cm
Height - 45cm
Issue 1 - 18/10/13

Safety and Care Advice
Important – Please read these instructions fully before starting assembly
Note: if required the next page
can be cut out and used as
reference throughout the
assembly. Keep this page with
these instructions for future
reference.
1
. Check you have all the
components and tools listed on
pages 2 and 3.
. Remove all fittings from the
plastic bags and separate them
into their groups.
. Keep children and animals
away from the work area, small
parts could choke if swallowed.
. Make sure you have enough
space to layout the parts before
starting.
. Do not stand or put weight on
the product, this could cause
damage.
. Assemble the item as close
to its final position (in the same
room) as possible.
. Assemble on a soft level
surface to avoid damaging the
unit or your floor.
. We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
. Parts of the assembly will be
easier with 2 people.
. Dispose of all packaging
carefully and responsibly.
This product contain
Natural timber; you may
notice some variation in the grain
and colour of different component
parts which is normal for furniture
produced using natural wood and
is not the result of any
manufacturing fault.
.
Care and maintenance
.
. Avoid placing the furniture in
direct sunlight as this will cause
the timber to prematurely age.
Use an appropriate furniture
polish for natural wood
furniture and a dry cloth to
clean the product.
. From time to time check
that there are no loose
screws on this unit.
. This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre.

Components - Panels
Please check you have all the panels listed below
2
16 Runner X2 (49,6 x 1,8cm)
02
03
04
07
Right back leg (43,2 x 4,5cm)
Left front leg (43,2 x 4,5cm)
Left back leg (43,2 x 4,5cm)
Side panel X2 (44 x 18,3cm)
Right front leg (43,2 x 4,5cm)
01
05 Top panel (105 x 55cm)
06 Back panel (94 x 18,3cm)
08 Shelf (94 x 52cm)
09 Drawer front (46,5 x 18cm)
10 Middle wall (49,6 x 18,3cm)
11 Drawer right side X2 (45 x 13cm)
12 Drawer left side X2 (45 x 13cm)
13 Drawer back X2 (41 x 13cm)
14 Drawer bottom X2 (44,8 x 42,2cm)
15 Large runner X2 (49,6 x 4,7cm)

Foot pad X 4
3
2m
Components - Fittings
Please check you have all the fittings listed below
If you have damaged or missing components,
call the Customer Helpline: 08456 400 800
Note: The quantities below are the correct amount to complete the assembly. In some cases more
fittings may be supplied than are required.
Ruler - Use this ruler to help correctly identify the screws
0510 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170
Tools required
Phillips screwdriver
(medium & large)
Eye protection
(when using a
hammer or glue)
Small
hammer
Ruler/tape
measure
AA
A
D
AB
8,0 x 30mm Wooden dowel X 43
C
3,5 x 30mm Screw X 54
3,5 x 25mm Screw X 06
EF
Handle X 2 Plastic pin X 4

Step 2
Fully insert
wooden dowels.
A
Insert wooden dowels
into the indicated parts .
Assembly InstructionsAssembly InstructionsAssembly Instructions
Step 1
Assembly Instructions
4
A
Insert wooden dowels
into the indicated parts .
A
A
A
A
A
08
10
07
12
11
15
06
A
A
AA
A
A
A
AA
AA
A
A
AA
A
A
A
A
A
2x
2x
2x
2x
A
A
A
10
A
10
Front view
==
A
Make sure dowels
are exactly the
same lenght in
both sides.

Assembly Instructions
Step 3
Step 4
5
10
Attach runners to the
middle wall using
screws as shown.
16
B
C
C
C
C
C
C
C
C
07
07
04
03
01
02
Parts , , , and
are labelled for easier
identification.
Attach left front leg and
left back leg to side
panel using screws .
02
01
03
03
C
04
04
07
Attach right front leg and
right back leg to side
panel using screws .
01
C
02
07
Make sure panels
are positioned as
shown.
16
10
10
16
B
B
BB
B
B
180º
Make sure runners
are positioned as
shown.

Assembly InstructionsAssembly InstructionsAssembly Instructions
Step 6
Step 5
Assembly Instructions
6
C
C
C
C
08
03
04
06
Attach back panel and
shelf to the side panel
and legs and ,
06
C
08
07 03 04
using screws .
C
C
01
08
C
06
02
C
Attach side panel and
legs and to shelf
and back panel using
07
C
01 08
06
screws .
02

Assembly Instructions
Step 7
Step 8
7
Fix middle wall panel
to the assembled cabinet
using screws .
Fix top panel to the
side panels and middle
wall using screws .
10
05
C
C
C
10
06
C
C
C
C
C
05

Assembly Instructions
Step 9
Step 10
8
With the help of a hammer,
fix foot pads as shown.
Fix large runners to
side panels using screws
.
D
15
C
D
D
D
D
C
15
C
15
D
4x

Assembly Instructions
Step 11
Step 12
9
Insert dowels only into
the front holes of the
runners.
A
A
A
A
AA
A
C
C
C
C
E
C
C
C
C
12
11
13
14
09
2x
2x
2x
a) Attach drawer sides
and to drawer front
using screws .
11
C
12 09
b) Slide drawer bottom
into slots on drawer sides
14
c) Attach drawer back
using screws . Fix
handle using screws .
13
C
C
E
b)
a)
c)