Argos Jakob 851/7739 User manual

Issue 1 - 10/10/19
Spare Parts
www.argos-support.co.uk
[e-mail]
0370 112 1928
Customer Support
0345 640 2020
Ottoman
J akob TV
King Bed

1
Safety and Care Advice
Product Details
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough space
to layout the parts before
starting.
Care and maintenance
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Only clean using a damp cloth
and mild detergent. Do not use
abrasive cleaners.
Use a dry cloth to clean the
product, furniture polish is
not recommended.
•From time to time check that there
are no loose screws, nuts or bolts.
If there are please re-tighten.
This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre.
Additional Guidance
●Assemble all parts and bolts loosely during assembly, only once the product is complete should you
fully tighten the bolts.
●Regularly check and ensure that all bolts and fittings are tightend properly.
•This product has been
constructed to be used in the
domestic environment only and
not for commercial purposes.
Assemble on a soft level
surface to avoid damaging the
Assemble the item as close
room) as possible.
Sainsbury's Argos is a trading name of both: Argos Limited, Registered office: 489-499 Avebury Boulevard, Milton Keynes, United
Kingdom, MK9 2NW, registered number: 01081551 (England and Wales); and Sainsbury's Supermarkets Limited, Registered
office: 33 Holborn, London, EC1N 2HT, registered number: 03261722 (England and Wales). Both companies are subsidiaries of J
Sainsbury's plc.
We do not
recommend the
use of power
drill/drivers for
inserting screws
as this could damage the unit.
Only use hand screwdrivers.
Parts of the assembly will be
easier with 2 people.
Dispose of all packaging
carefully and responsibly.
●Maximum user weight 110kg
●This product is compliant EN60355-1&EN1725
Jakob TV Ottoman King Bed 851/7739

2
Important Ottoman Safety Warnings
Caution. This bed uses a pressurised mechanism.
Use caution when operating - Always use two hands at arm’s length, and only
You must ensure the mattress is on the bed frame before lifting the mechanism
- Failure to do so may result in injury.
Please ensure Children and Pets are kept away from the bed when operating
If removing the mattress, make sure that the frame is secured as it could flip
Only use the storage compartment when the frame is fully raised in the ‘up’
No children or animals are left unattended when the frame is in the ‘up’ position
Do not remain on the bed whilst the lifting mechanism is in use.
Beware of Entrapment –Keep both hands clear of mechanism when operating
the mechanism.
When lifting the bed remove all bedding –Except the fitted sheet.
where illustrated on the product.
the bed mechanism.
open.
position.

Bag 1
Fittings (Shown to scale)
3
M8 x 20mm Bolt x 2
M8 x 18mm Bolt x 8
Stick felts x 4 Spring Washers x 8
B
A C
DEF
HI
J
LMN
P
Allen Key(M4) x 1
Q
K
Allen Key(M5) x 1
M8 x 19mm Washer x 26 M6 x 10mm Bolt x 8
M8 x 45mm Bolt x 16
S
M8 Nut x 8
M13 Spanner x 1
End plastic cap(small) x 28 Wide plastic cap(big) x 14
M6 x 20mm Bolt x 18
Leg pad x 20
O
M6 Nut x 4
M6 x 19mm Washer x 4 M10 Spanner x 1
R
Power cord x 1

4
Bag 2
Fittings (Shown to scale)
M8 x 20mm Bolt x 4 M8 x 19mm Washer x 4
Allen Key(M5) x 1
UV
W
M6 x 20mm Bolt x 4
X
Allen Key(M4) x 1
T

Phillips screwdriver
(small & medium)
Ruler/tape
measure
5
Tools required

Panels
6
Side rail x 1 (2030 x 340mm)
1
Headboard (1585 x 1075mm)
3Footboard (1585 x 810mm)
4
Cross Rail For Baseboard x 4 (1345 x 53mm)
7
Baseboard x 2 (2018 x 379mm)
5
6Baseboard x 2 (2018 x 379mm)
Central support rail for
8
Side rail x 1 (2030 x 340mm)
2
basedoard (200 x 53mm)

Panels
7
Tube slat frame (1904 x 95mm)
9
10 Tube slat frame x 1 (1865 x 30mm)
12 Tube slat frame x 2 (1400 x 30mm)
11 Tube slat frame - for metal support legs x 1 (1865 x 30mm)
Connect for slat
13
frame x 4 (95 x 95mm)
Metal Support legs
14
x 2 (120 x200mm)
Belt x 1 (425 x 37mm)
15
16
x 1 (120 x 190mm)
Support Frame x 2 ( 500mm )
17 Support Plate
18
x 2 ( 596 x 35mm)
Slats x 2 (745 x 54mm)
19 non-woven x 1 (1000 x 580mm)
20
Mattress holder

1
8
Pt. No
Allen key(M5) x 1
G
C
Pt. No
G
F
Spring Wasgers x 8
Pt. No
M8 x 19mm Washer x 8
G
Pt. No
M8 x 45mm Bolt x 8
G
J
G
C
G
J
G
F
G
17
3
4
34
18

2
Pt. No
Stick felts x 4
E
9
Please stick felt pads on the cleat of side rails as above photo.
E
2
1

10
3B
Pt. No
M8 x 18mm Bolt x 8
B
3
4

11
4
Pt. No
T
Pt. No
M8 x 20mm Bolt x 4
V
M8 x 19mm Washer x 4
Pt. No
U
Allen key(M5) x 1
Pt. No
W
Pt. No
M6 x 20mm Bolt x 4
X
Allen key(M4) x 1
Attach TV
X
Uor
W
Tor
V
32 -43
”
TV
”

12
5
IMPORTANT INFORMATION
How to pair the remote control with the TV control
unit.
-Insert wall outlet power cord into the footboard control panel and plug into
wall socket DO NOT TURN ON THE POWER AT THIS STAGE.
-Insert battery into the remote control.
-Turn the mains power on (ensuring you have the remote to hand).
-Once power is applied a red LED will illuminate on the footboard control
panel. The red LED will only illuminate for approximately 5 seconds (steady,
then blinking).
-Whilst the LED is illuminated press and hold any button on the remote for 5
seconds in order to pair with footboard control panel. *IMPORTANT* – you
can only attempt pairing whilst the red LED on the footboard control panel
is illuminated.
-Once paired try the arrow keys on the remote to confirm pairing is
successful.
NOTE – Should pairing be unsuccessful turn the mains power off, wait a
minimum of 2 minutes then attempt pairing again ensuring the red LED
is illuminated.
Next page for shown:

13
6
2.Press the UP or
1.Long press to pair
for first time
DOWN button to raise or
lower the TV mechanism
”
” ” ”
Remote
control
Remote control
included battery
Tighten the back of the TV cable as follows

14
7
8
3
4
2
2
3 4
Pt. No
Allen key(M5) x 1
G
C
G
C

15
9
Screw for piston Safety warning label
Put the rail with the safety warning label on this side, keep away from the screw for piston.
T hese holes for mattress holders
11
1012
12
13
13
13
13
M ust to be neardy

16
10
Pt. No
H
M6 x 10mm Bolt x 8
Pt. No
I
Allen Key(M4) x 1
Pt. No
C
Allen Key(M5) x 1
Pt. No
G
M8 x 19mm Washer x 8
Pt. No
K
M8 Nut x 4
Pt. No
L
M13 Spanner x 1
Pt. No
J
M8 x 45mm Bolt x 4
H
I
J
C
G
G
K
L
9
12
12
11
10
12
9

17
11
Pt. No
R
Pt. No
End plastic cap(small) x 28
S
Wide plastic cap(big) x 14
R
R
S
19
19
12
Pt. No
C
Allen Key(M5) x 1
Pt. No
G
M8 x 19mm Washer x 2
Pt. No
D
M8 x 20mm Bolt x 2
D
C
G
16

18
13
14
Pt. No
O
M6 x 19mm Washer x 4
Pt. No
N
M6 Nut x 4
Pt. No
P
M10 Spanner x 1
N
O
P

19
14
Pt. No
J
M8 x 45mm Bolt x 4
Pt. No
C
Allen Key(M5) x 1
Pt. No
G
M8 x 19mm Washer x 8
Pt. No
K
M8 Nut x 4
Pt. No
L
M13 Spanner x 1
G
Safety warning label
15
J
C
GG
GG
K
L