Argos PAULO 1442966 User manual

Simple Assembly Instructions - Please keep for future reference
IMPORTANT
1. Read these instructions carefully and
familiarise yourself with the procedure
before assembling the unit.
2. Check that you have all the component
parts following the list on the back
cover and familiarise yourself with
each part before proceeding.
3. Take all the fittings out of the plastic bag
and separate them into their groups.
4. Ensure you have enough space to lay out
all the parts before assembly.
5. To avoid scratching it is recommended
that you assemble the unit on a soft
level surface.
A1 x Seat Cushion
Components
1 x
BBack Rest
PAULO CHAIR RECLINER
144966
184919
1874864

fig. 2
Assembly Instructions Assembly Instructions
Stage 2 – Finishing the UnitStage 1 – Fitting the Unit
4. Finally carefully place the unit in
the desired location. 
Back and Foot Rest Adjustment
This Chair features a reclining
back rest and raised foot rest.
You need to be sitting in the chair
to activate the features.
1. Pull the "Adjustment Lever" then
gently lean back, the chair will
recline and the foot rest will
automatically lift up. 
2. Sit up and lock the foot rest.
The sofa return to the normal
position. 
See fig. 3.
3. Adjust the recliner to your own
requirements.
NOTE: It would be useful to ask
someone to help you at this
stage.
B
Cushion A

See fig. 2.
NOTE: Carefully line up the two
align correctly.
B
A
Care and Maintenance
Safety
To avoid any risk of suffocation to animals or children dispose of the plastic
bags immediately.
Fitting
From time to time please ensure there are no loose screws on the product.
Cleaning
As with all surfaces clean with a damp cloth and mild detergent, do not use bleach
or abrasive products.
Metal Lock
Attach the Back Rest
side metal locks. Ensure they
fig. 3
Adjustment
Lever
fig. 1
See fig.1.
1. 

CAUTION:
-  Beware of entrapment. Keep
hands and fingers clear of the
the controls.
-  Ensure that children or pets are
not playing or lying in the
operated.
-  Prevent children from
playing on the
furniture or with the controls.
Fit the velcro cover on the back
rests onto the velcro on the
seat cushion.
tilt mechanism when operating
way when the tilt
mechanism is
2. 
See fig. 2.
to the
Seat . Engage the
metal locks and push fit. You
should hear them lock into
position.