IPM2-FSM
|Flexible Gooseneck Seat Bolt or Floor Mount for Apple iPad 2
Adjust the steel shaft by bending with both hands to the
desired location of the male dual T head.
Step 1.
Pedestal Head Adjustments
Continued on other side...
Safety Precautions
Do not install Arkon products over an air bag cover or within the air
bag deployment zone. Arkon Resources, Inc. assumes no responsi-
bility of liability for injury or death as a result of car crashes and / or
air bag deployment.
Arkon is not responsible for any damages caused to your car, your
device, or yourself due to the installation or use of this pedestal mount.
!
The Mobile Mounting Specialists™
Consumer Hotline:
USA (800) 841-0884
INT’L (626) 254-9005
Monday - Friday 9 am - 5 pm, PST
www.arkon.com
Arcadia, CA 91006 USA
Designed in USA | Made in China and Taiwan
© Copyright 2011 Arkon Resources, Inc.
3
4
Do not place mount in or near an air bag deployment zone or where it
will obstruct view of the road.
!
Package Contents:
(1) IPM2-FSM - 20” Flexible aluminum gooseneck oor or console mount
Includes: (1) Seat Bolt Bracket, (1) Floor / Console Bracket, (4)Screws
Apple and iPad are trademarks of Apple, Inc
IPM2-FSM
Flexible iPad
Floor or Console Mount
Attach the IPad 2 Hard Case Holder
Step 1. Attach the hard case iPad 2 holder to the headrest mount by
inserting the dual T-tabs on the mount to the dual T-slots on
the holder.
4
AB
Mount Base Mount Base
Floor Bracket Floor Bracket
With a socket wrench, loosen the passenger seat track bolt, insert
the seat track bolt bracket, and retighten the seat track bolt.
Screw the mount bracket to the mount. Depending on your vehicle,
you may need to change the orientation of the bracket.
Attach the Floor / Console Bracket with screws.
Fig. A
Fig. B
Passenger Seat Bolt Mounting
Alternative Floor or Console Mounting
For a more permanent mount, connect the Floor/Console Mount Bracket
to the oor or console. This will require drilling into your vehicle’s
interior surface.
For a simple mount that can be easily moved to another vehicle, install
using the passenger seat track bolt.
!Drilling into the dash, oor, or console will permanently damage
the vehicle. Use caution and consult a mobile install professional
to avoid drilling into the gas tank, electrical system or other highly
sensitive vehicle components.
1
1
2
Do not place mount in or near an air bag deployment zone or
where it will obstruct view of the road.
!
