Art's-Way Manufacturing 6812 User manual

Art’s-Way Manufacturing Co., Inc.
Model 6812-
613600 - Hydraulic Radiator Kit
Illustrated Parts List
619050
Issued March 2016
KIT INSTRUCTIONS

1. MOUNT THE ASSEMBLED COOLER KIT AS SHOWN WITH THE BOTTOM OF THE COOLER
ROUGHLY EVEN WITH THE TOP OF THE HYDRAULIC TANK.
2. DISCONNECT THE OIL RETURN HOSE FROM THE OIL FILTER, LEAVE THE 90° FITTING
INSTALLED.
3. RECONNECT THE OIL RETURN HOSE TO THE BOTTOM OF THE OIL COOLER.
4. CONNECT THE NEW INCLUDED HOSE TO THE TOP OF THE OIL COOLER AND THEN TO THE
OIL FILTER, ADJUST THE DIRECTION OF THE 90° FITTINGS AS NECESSARY.
5. REMOVE THE ELECTRICAL COVER FROM THE CENTER AXLE SUPPORT BEAM NEAR THE
CENTER OF THE MACHINE.
6. DRILLING 2 HOLES, MOUNT THE FAN CONTROLLER TO THE UNDERSIDE OF THE ELECTRICAL
COVER.
7. LOCATE THE WHITE AND BLUE WIRES WHICH ARE PART OF THE CURRENT HARVESTER
WIRE HARNESS.
8. CONNECT THE RED WIRE FROM THE FAN CONTROLLER TO THE BLUE WIRE (KEYED ON) ON
THE HARVESTER HARNESS.
9. CONNECT THE WHITE AND BLACK WIRES FROM THE FAN CONTROLLER TO THE WHITE
WIRE (GROUND) ON THE HARVESTER HARNESS
10. CONNECT THE OIL COOLER HARNESS TO THE FAN AND THEN TO THE FAN CONTROLLER.
11. RE-INSTALL THE ELECTRICAL COVER, LOOPING ANY EXCESS WIRES UNDERNEATH
BEFORE TIGHTENING DOWN.
INSTRUCTIONS

10
5
6
6
3
4
11
7
12
6
8
14
2
1
9
13
6
NOTES:
INCLUDES MANUAL P/N: 613620 1.
INCLUDES HOSE P/N: 604030 2.
INCLUDES FAN CONTROLLER: 613610 3.
INCLUDES JUMPER HARNESS: 613790 4.
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 021180 WASHER, LOCK 3/8 4
2021190
WASHER, FLAT 3/8 STD 4
3468370
BOLT, U 1/2-13 X 2.06 X 4.25 2
4530160
FITTING, HYD 90° 2
5600050
BOLT, HFH 3/8-16 X 1.00" 3
6600120
NUT, HFH NYLOC 3/8-16 15
7 600140 NUT, HFH NYLOC 1/2-13 4
8612510
COOLER, HYDRAULIC OIL 1
9613320
BOLT, SHCS 3/8-16 4
10 613630 FLAP, OIL COOLER 1
11 615150 MOUNT, OIL COOLER 1
12 615190 TUBE, SPACER 4
13 615310 ROD, THREADED 3/8-16 4
14 615525 SHROUD, OIL COOLER 1
DRAWING NO.
613600
613600
KIT, OIL COOLER
1:3
6812 BOLT-ON
LISTED
N. WHITMAN
6812
E.C.N.
DATE
APPR
DESCRIPTION
LTR
MATERIAL
REV.
EP#
REVISIONS
DRAWN
CHK
APPR
-
MACHINING DRAWINGS: REMOVE
ALL BURRS & SHARP EDGES.
MODEL
NOTE: DO NOT SCALE
EXCEPT AS MAY BE OTHERWISE PROVIDED BY
CONTRACT. THESE DRAWINGS AND SPECIFI-
CATIONS ARE THE PROPERTY OF ARTS-WAY
MFG. CO., ARE ISSUED IN STRICT CONFIDENCE,
AND SHALL NOT BE REPRODUCED OR COPIED,
OR USED AS THE BASIS FOR THE MANUFACTURE
OR SALE OF APPARATUS WITHOUT PERMISSION.
TITLE
DATE
SCALE
DRAWING NO.
SIZE
D
Art's-Way Manufacturing Co., Inc.
Phone: [phone]
Fax: [phone]
Armstrong, Iowa 50514-0288
±.010
±.O30
±.060
(.XXX)
(.XX)
(.X)
ANGLES ± 1°
THREE PLACE
TWO PLACE
ONE PLACE
DIMENSIONS ARE IN INCHES
UNLESS OTHERWISE SPECIFIED
-
-
NEW RELEASE ON SOLIDWORKS
-
NRW
464.97
WEIGHT
SIMILAR PART(S):
12/18/15
12/18/15

ITEM NO. PART NUMBER DESCRIPTION QTY.
1 021180 WASHER, LOCK 3/8 4
2 021190 WASHER, FLAT 3/8 STD 4
3 468370 BOLT, U 1/2-13 X 2.06 X 4.25 2
4 530160 FITTING, HYD 90° 2
5 600050 BOLT, HFH 3/8-16 X 1.00” 3
6 600120 NUT, HFH NYLOC 3/8-16 15
7 600140 NUT, HFH NYLOC 1/2-13 4
8 612510 COOLER, HYDRAULIC OIL 1
9 613320 BOLT, SHCS 3/8-16 4
10 613630 FLAP, OIL COOLER 1
11 615150 MOUNT, OIL COOLER 1
12 615190 TUBE, SPACER 4
13 615310 ROD, THREADED 3/8-16 4
14 615525 SHROUD, OIL COOLER 1

Art’s-Way Manufacturing Co., Inc. TECHNICAL MANUALS
Manuals are available from your local dealer or Art’s-Way Manufacturing Co., Inc. for the operation, service, and repair of your
machine. For prompt convenient service, contact your local dealer for assistance in obtaining the manuals for your machine.
Your local dealer can expedite your order for operator manuals, illustrated parts catalogs, service manuals, and maintenance
records.
Always give the Machine Name, Model, and Serial Number so your local dealer can provide the correct manuals for your
machine.
Art’s-Way Manufacturing Co., Inc. reserves the right to make improvements in design or changes in specications at any time
without incurring any obligation to install them on units previously sold.
Except as expressly authorized, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or
stored in any storage medium, for any purpose without the express prior written consent of Art’s-Way Manufacturing Co., Inc.
ART’S-WAY MANUFACTURING CO., INC.
HWY 9 WEST - PO Box 288
Armstrong, IA. 50514 U.S.A
© Copyright 2012
ART’S-WAY MANUFACTURING CO., INC.
All Rights Reserved