ASROCK NUC BOX-1360P/D5 User manual

NUC BOX-1260P
NUC BOX-1240P
NUC BOX-1220P
User Manual
Version 1.0
Published May 2022
NUC BOX-1360P/D5
NUC BOX-1340P/D5
User Manual

Version 1.0
Published April 2023
Copyright©2023 ASRock Industrial Inc. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or translated
in any language, in any form or by any means, except duplication of documentation by the
purchaser for backup purpose, without written consent of ASRock Industrial Inc.
Products and corporate names appearing in this documentation may or may not be
registered trademarks or copyrights of their respective companies, and are used only for
identication or explanation and to the owners’ benet, without intent to infringe.
Disclaimer:
Specifications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock Industrial. ASRock Industrial assumes no
responsibility for any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock Industrial does not provide
warranty of any kind, either expressed or implied, including but not limited to the implied
warranties or conditions of merchantability or tness for a particular purpose.
In no event shall ASRock Industrial, its directors, ocers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for loss of
prots, loss of business, loss of data, interruption of business and the like), even if ASRock
Industrial has been advised of the possibility of such damages arising from any defect or
error in the documentation or product.
is device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
CALIFORNIA, USA ONLY
e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate”
ASRock Industrial’s Website: https://www.asrockind.com

Replaceable batteries
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
Contact Information
If you need to contact ASRock Industrial or want to know more about ASRock Industrial,
you’re welcome to visit ASRock Industrial’s website at https://www.asrockind.com; or you
may contact your dealer for further information.
ASRock Industrial Incorporation
Email: [email protected]
e terms HDMI®and HDMI High-Denition Multimedia Interface, and the HDMI logo are
trademarks or registered trademarks of HDMI Licensing LLC in the United States and other
countries.

Contents
Chapter 1 Introduction 1
1.1 Package Contents 1
1.2 Product Specications 2
1.3 Block Diagram 4
Chapter 2 Product Overview 5
2.1 Front View 5
2.2 Rear View 6
2.3 Inside View 7
Chapter 3 Hardware Installation 8
3.1 How to Remove the Bottom Case 8
3.2 How to Install the Memory Modules 9
3.3 How to Install the WiFi Module 10
3.4 How to Remove the M.2 SSD (Type 2280) and the Bracket 11
3.5 How to Install the M.2 SSD (Type 2260) 12
3.6 How to Install the Hard Drive 14
3.7 How to Install the VESA Bracket 16
Chapter 4 Motherboard 18
4.1 Motherboard Layout 18
4.2 Motherboard Specications 20
4.3 Onboard Headers and Connectors 22
4.4 Expansion Slots (M.2 Slots) 25
Chapter 5 UEFI SETUP UTILITY 26
5.1 Introduction 26

5.1.1 Entering BIOS Setup 26
5.1.2 UEFI Menu Bar 27
5.1.3 Navigation Keys 28
5.2 Main Screen (Advanced Mode) 29
5.3 Advanced Screen 30
5.3.2 Chipset Conguration 34
5.3.3 Storage Conguration 36
5.3.4 Super IO Conguration 38
5.3.5 AMT Conguration 39
5.3.6 ACPI Conguration 41
5.3.7 USB Conguration 42
5.3.8 Trusted Computing 43
5.4 Hardware Health Event Monitoring Screen 46
5.5 Security Screen 47
5.6 Boot Screen 48
5.7 Exit Screen 50
Chapter 6 Software Support 51
6.1 Install Operating System 51

NUC BOX-1360P/D5
NUC BOX-1340P/D5
PB 1
English
Chapter 1 Introduction
1.1 Package Contents
• NUC BOX-1360P/D5 / NUC BOX-1340P/D5
• 1 x Screw for M.2 slot
• 1 x 19V/120W Power Adapter (i7-1360P)
• 1 x 19V/90W Power Adapter (i5-1340P)
• 1 x Screw Package
• 1 x VESA mounting bracket
• 1 x Bracket for M.2 2280 support
• Quick Installation Guide
Because the hardware specications might be updated, the content of this documentation
will be subject to change without notice.
If any items are missing or appear damaged, contact your authorized dealer.

2 3
English
1.2 Product Specications
NUC BOX-1360P/D5
NUC BOX-1340P/D5 Barebone
CPU
Intel® 13th Gen (Raptor Lake-P) Core™ Processors
NUC BOX-1360P/D5 (i7-1360P, 4P+8E)
NUC BOX-1340P/D5 (i5-1340P, 4P+8E)
Chipset MCP
BIOS AMI SPI 256 Mbit
Memory Supports Dual Channel DDR5 4800 MHz
Storage 1 x M.2 (KEY M, 2242/2260/2280)
with PCIe Gen4x4 for SSD
*M.2 Key M 2280 (Supported by bracket)
1 x SATA3.0 (6.0 Gb/s)
LAN LAN1: Intel® I226LM with 10/100/1000/2500 Mbps,
supports vPro
LAN2: Intel® I226V with 10/100/1000/2500 Mbps
WiFi 1 x Wi-Fi 6E 802.11ax (2.4Gbps) + BT 5.2
(M.2 Key E, 2230 PCIe x1, USB 2.0 for Wireless)
Audio Realtek ALC256, High Denition Audio
Front I/O 1 x USB 3.2 Gen2 (Type A)
1 x USB4/underboltTM 4 (5V/3A, supports DP2.1a
display output)
1 x USB 3.2 Gen2x2 (Type-C, 5V/3A, supports DP1.4a
display output)
1 (headphone & microphone jack)
M.2 slot
SATA

NUC BOX-1360P/D5
NUC BOX-1340P/D5
2 3
English
Rear I/O 1 x HDMI 2.0b, 1 x DP1.4a, 2 x 2.5 Gigabit LAN,
2 x USB 3.2 Gen2 (Type-A), DC-IN
Power Unit 19V/120W Power Adapter (i7-1360P)
19V/90W Power Adapter (i5-1340P)
Dimension 110.mm (W)x 117.5mm (D) x 47.85mm (H)
VESA Bracket included , supports 75 x 75 and 100 x 100 mm
Weight 1Kg
Operating Tem-
perature 0°C~40°C

4 5
English
1.3 Block Diagram
NUC BOX-1360P/D5
NUC BOX-1340P/D5
Intel
Raptor Lake-P
FCBGA1744
Package(50*25mm)
Hayden
Bridge
JHL9040R
TCP0+USB2.0#5
TBT
Type-C
Connector
Type-C
Connector
eSPI
Display port
TCP2
HDMI
Connector
HDMI ITE
IT66318
DDIB
2x USB3.2 Gen2
Connector
2xUSB3.2 Gen2(#1, #2)
RJ45
Connector
2.5G Intel
I226LM
PCIex1(#5)
RJ45
Connector
2.5G Intel
I226V
PCIex1(#9)
DDR5 4800MHZ
SO-DIMM
Line out & Mic in
Combo Jack
Audio Realtek
ALC233
HDA
2x USB2.0
Connector
2x USB2.0(#7, #8)
NUVOTON
NCT5525D
COM 232/422/485*1 UART*1
CPU FAN1
FAN
SATA(#0) SATA Port
PCIe x1(#6)
M.2 Key E
CNVi
USB2.0(#10)
PCIe x4+USB2.0(#9) M.2 Key M
SPI INFINEON
SLB9670XQ2.0
2x USB2.0(#1, #2)
SO-DIMM
DDR5 4800MHZ
TCP1+ USB2.0#6
2x USB3.2 Gen2
Connector
2xUSB3.2 Gen2(#3, #4)
2x USB2.0(#3, #4)

NUC BOX-1360P/D5
NUC BOX-1340P/D5
4 5
English
Chapter 2 Product Overview
is chapter provides diagrams showing the location of important components of
the NUC BOX-1360/D5 / NUC BOX-1340P/D5.
2.1 Front View
No. Description
1Audio (Mic-in, Line-out)
2 USB4 / underbolt 4 (5V/3A, supports DP2.1a display output)
3 USB 3.2 Gen2x2 (Type C, supports DP1.4a display output)
4 USB 3.2 Gen2 (Type A)
1 2
4
3
TM

6 7
English
2.2 Rear View
No. Description
1DC-IN
2 1 x HDMI
3 RJ-45 (2.5G)*
4DisplayPort**
5 USB 3.2 Gen2
* ere are two LEDs on the LAN port. Please refer to the table below for the LAN port LED indications.
Activity / Link LED Speed LED
Status Description Status Description
O No Link O 10Mbps connection
Blinking Data Activity Orange 100Mbps/1Gbps
connection
On Link Green 2.5Gbps connection
**To use DisplayPort as a display output, please connect your monitor/display to HDMI Port when
installing OS system.
is DisplayPort only supports DP to HDMI dongle and DP to DVI dongle, and does not support DP to
D-Sub dongle.
ACT/LINK LED
SPEED LED
LAN Port
12 3
45

NUC BOX-1360P/D5
NUC BOX-1340P/D5
6 7
English
2.3 Inside View
No. Description
1SO-DIMM Slots
2 SATA 3.0 Connector
3 M.2 Slot (2242/2260/2280)
4Wi Module Slot
5 Hard Disk Drive Tray (compatible with 2.5" SATA HDD/SSD)
SO-DIMM memory, Wi module and M.2 are not included with this system.
1
3
2
4
5

8 9
English
Chapter 3 Hardware Installation
is chapter helps you install or remove important components.
3.1 How to Remove the Bottom Case
1. Remove the four screws on the bottom case.
2. en li up and remove the bottom panel.
2
1

NUC BOX-1360P/D5
NUC BOX-1340P/D5
8 9
English
3.2 How to Install the Memory Modules
1. Carefully insert the SO-DIMM memory modules into the slot at a 30-degree angle.
2. Push down until the modules snap into place.
1. e NUC BOX-1360P/D5 / NUC BOX-1340P/D5 requires DDR5 SO-DIMM.
2. For dual channel conguration, you always need to install identical (the same brand,
speed, size and chip-type) Memory Module SO-DIMM pairs.
e SO-DIMM only ts in one correct orientation. It will cause permanent damage to the
motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.

10 11
English
3.3 How to Install the WiFi Module
1. Locate the WiFi Module slot on the motherboard.
2. Carefully insert the WiFi Module into the slot.
3. Tighten the screw to secure the WiFi Module to the motherboard.

NUC BOX-1360P/D5
NUC BOX-1340P/D5
10 11
English
3.4 How to Remove the M.2 SSD (Type 2280) and the Bracket
1. Release the screw and carefully remove the M.2 SSD (Type 2280).
2. Release the screw and remove the bracket from the motherboard.

12 13
English
3.5 How to Install the M.2 SSD (Type 2260)
1. Locate the M.2 slot on the motherboard. Install the stando.
2. Carefully insert the M.2 SSD into the slot.

NUC BOX-1360P/D5
NUC BOX-1340P/D5
12 13
English
3. Tighten the screw to secure the M.2 SSD to the motherboard.

14 15
English
3.6 How to Install the Hard Drive
1. Carefully insert the M.2 SSD (Type 2280) into the slot.
2. Carefully insert the M.2 SSD (Type 2280) into the slot.

NUC BOX-1360P/D5
NUC BOX-1340P/D5
14 15
English
3. Attach the HDD assembly to the bottom panel and secure it using the four screws.
4. Connect the SATA Cable to the connector.
5. en reinstall the bottom panel.