ASROCK BTC PRO Kit User manual

PB 1
P/N: 15G06X714000AK V1.0
*15G06X714000AK*
BTC PRO Kit
Specications
BTC_X16
• 1 x PCI Express x16 Slot
• 2 x PCIE Signal Connectors
• 1 x PCIE Power Connector
BTC-CARD-X1
• PCI Express Gold Finger
• 2 x PCIE Signal Connectors
• 1 x PCIE Power Connector
Cables • 2 x PCIE Signal Cables
• 1 x PCIE Power Cable
PackageContents
• 1 x BTC_X16
• 1 x BTC-CARD-X1
• 2 x PCIE Signal Cable (Straight Plug to Right
Angled Plug, 340mm)
• 1 x PCIE Power Cable (5-pin, 360mm)
InstallationProcedure
Note:
*WAKE Function is not supported.
*SMBus Function is not supported.
*e maximum +12V current for PCIE Power
cable is 6A.
*PCI Express 3.0 is supported.
BTC-CARD-X1
BTC_X16
PCIE Power Cable
PCIE Signal Cables
1. Connect one end of the PCIE Signal Cable (with Right
Angled Plug) to the CON_1 connector on the BTC_X16.
2. Connect the other end of the PCIE Signal Cable (with
Straight Plug) to the CON_1 connector on the BTC-
CARD-X1.
3. Connect one end of the PCIE Signal Cable (with Right
Angled Plug) to the CON_2 connector on the BTC_
X16.
4. Connect the other end of the PCIE Signal Cable (with
Straight Plug) to the CON_2 connector on the BTC-
CARD-X1.
5. Connect one end of the PCIE Power Cable to the
CON_3 connector on the BTC_X16.
6. Connect the other end of the PCIE Power Cable to the
CON_3 connector on the BTC-CARD-X1.
1
2 6
3
4
5

2PB
BTC PRO Kit:
7. Install your graphics card to a PCIe x16 slot on the BTC_X16.
Install the BTC-CARD-X1 to a PCIe x1 slot on the motherboard.
or
Install the BTC-CARD-X1 to a PCIe x4, x8 or x16 slot on the motherboard.
Never install BTC-CARD-X1 in the wrong orientation; otherwise, the card may be damaged.
BTC-CARD-X1
BTC_X16