ASROCK NUCS BOX-1360P/D4 User manual

NUC BOX-1260P
NUC BOX-1240P
NUC BOX-1220P
User Manual
Version 1.0
Published May 2022

Version 1.0
Published January 2023
Copyright©2023 ASRock Industrial Inc. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or translated
in any language, in any form or by any means, except duplication of documentation by the
purchaser for backup purpose, without written consent of ASRock Industrial Inc.
Products and corporate names appearing in this documentation may or may not be
registered trademarks or copyrights of their respective companies, and are used only for
identication or explanation and to the owners’ benet, without intent to infringe.
Disclaimer:
Specifications and information contained in this documentation are furnished for
informationa l use only and subject to change without notice, and should not be
constructed as a commitment by ASRock Industrial. ASRock Industrial assumes no
responsibility for any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock Industrial does not provide
warranty of any kind, either expressed or implied, including but not limited to the implied
warranties or conditions of merchantability or tness for a particular purpose.
In no event shall ASRock Industrial, its directors, ocers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for loss of
prots, loss of business, loss of data, interruption of business and the like), even if ASRock
Industrial has been advised of the possibility of such damages arising from any defect or
error in the documentation or product.
is device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
CALIFORNIA, USA ONLY
e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate”
ASRock Industrial’s Website: https://www.asrockind.com

Replaceable batteries
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
Contact Information
If you need to contact ASRock Industrial or want to know more about ASRock
Industrial, you’re welcome to visit ASRock Industrial’s website at https://www.
asrockind.com; or you may contact your dealer for further information.
ASRock Industrial Incorporation
Email: [e-mail]
e terms HDMI®and HDMI High-Denition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.

Contents
Chapter 1 Introduction 1
1.1 Package Contents 1
1.2 Product Specications 2
1.3 Block Diagram 4
Chapter 2 Product Overview 5
2.1 Front View 5
2.2 Rear View 6
2.3 Inside View 7
Chapter 3 Hardware Installation 8
3.1 How to Remove the Bottom Case 8
3.2 How to Install the Memory Modules 9
3.3 How to Install the WiFi Module 10
3.4 How to Install the M.2 SSD (Type 2242) 11
3.5 How to Install the M.2 SSD (Type 2280) 13
3.6 How to Install the VESA Bracket 14
Chapter 4 Motherboard 16
4.1 Motherboard Layout 16
4.2 Motherboard Specications 17
4.3 Onboard Headers and Connectors 19
4.4 Expansion Slots (M.2 Slots) 21
Chapter 5 UEFI SETUP UTILITY 22
5.1 Introduction 22
5.1.1 Entering BIOS Setup 22
5.1.2 UEFI Menu Bar 23

5.1.3 Navigation Keys 24
5.2 Main Screen (Advanced Mode) 25
5.3 Advanced Screen 26
5.3.1 CPU Conguration 27
5.3.2 Chipset Conguration 30
5.3.3 Super IO Conguration 32
5.3.4 AMT Conguration 33
5.3.5 ACPI Conguration 35
5.3.6 USB Conguration 36
5.3.7 Trusted Computing 37
5.4 Hardware Health Event Monitoring Screen 40
5.5 Security Screen 41
5.6 Boot Screen 42
5.7 Exit Screen 44
Chapter 6 Software Support 45
6.1 Install Operating System 45

6 1
Chapter 1 Introduction
1.1 Package Contents
• NUCS BOX-1360P/D4 / NUCS BOX-1340P/D4
• 1 x Screw for M.2 slot
• 1 x 19V/90W Power Adapter
• 1 x Screw Package
• 1 x VESA mounting bracket
• Quick Installation Guide

NUCS BOX-1360P/D4
NUCS BOX-1340P/D4
6 1
English
Chapter 1 Introduction
1.1 Package Contents
• NUCS BOX-1360P/D4 / NUCS BOX-1340P/D4
• 1 x Screw for M.2 slot
• 1 x 19V/90W Power Adapter
• 1 x Screw Package
• 1 x VESA mounting bracket
• Quick Installation Guide
Because the hardware specications might be updated, the content of this documentation
will be subject to change without notice.
If any items are missing or appear damaged, contact your authorized dealer.

2 3
English
1.2 Product Specications
NUCS BOX-1360P/D4
NUCS BOX-1340P/D4 Barebone
CPU
Intel® 13th Gen (Raptor Lake-P) Core™ Processors
NUCS BOX-1360P/D4( i7-1360P, 4P+8E)
NUCS BOX-1340P/D4( i5-1340P, 4P+8E)
Chipset MCP
BIOS AMI SPI 256 Mbit
Memory Supports Dual Channel DDR4 3200 MHz
Storage 1 x M.2 (KEY M, 2242/2280)
with PCIe Gen4 x4 for SSD
LAN Intel® I226LM with 10/100/1000/2500 Mbps
WiFi 1 x Wi-Fi 6E 802.11ax (2.4Gbps) + BT 5.2
(M.2 Key E, 2230 PCIe x1, USB 2.0 for Wireless)
Audio Realtek ALC233, High Denition Audio
Front I/O 2 x USB 3.2 Gen2 (Type A)
1 x USB4 (Supports DP1.4a display output)
1 x USB3.2 Gen2 (Type-C, Supports DP1.4a display
output)
1 (headphone & microphone jack)
Rear I/O 1 x HDMI 2.0b, 1 x DP1.4a, 1 x 2.5 Gigabit LAN, 2 x USB
3.2 Gen2 (Type-A), DC-IN
Power Unit 19V/90W Power Adapter
M.2 slot

NUCS BOX-1360P/D4
NUCS BOX-1340P/D4
2 3
English
Dimension 110.mm (W)x 117.5mm (D) x 37mm (H)
VESA Bracket included , supports 75 x 75 and 100 x 100 mm
Weight 0.9Kg
Operating Tem-
perature 0°C~40°C

4 5
English
1.3 Block Diagram
M.2 M Key
2280
PCIe x4 Gen4
3.5mm
Combo Conn.
DDR4 SO-DIMM 3200 (32GB)
M.2 KEY-E (2230)
DDR4 - CH1
LAN1
RPL-P 28W
PCIe#6+CNVi+USB2#10
Intel
DDR4 - CH0
DDR4 SO-DIMM 3200 (32GB)
PCIe#6+USB2#10
CPU_PCIEX4_A_[3:1]
SPI0 CS0#
SPI ROM 32MB
Flash Box
TPM2.0
CS2#
TCP0+USB2#5
TCP2+USB2#6
TCP3
HDMI
Conn.
ITE
Retimer
BB
Retimer
TypeC Conn.
(USB+DP)
cedoC ADH
ALC233/256
Line_Out
MIC_In
USB3#1+USB#1
USB3#2+USB#2
USB3.2 Rear IO
TypeA
USB3#3+USB2#3
USB3.2 Front IO
TypeA
SIO
NCT5525D
GPIO
USB
PWR Ctrl
I226LM
PCIe#5(vPro)
2.5G LAN
RJ45
MDIO
Transformer
MDIO
DDIB
ITE
Retimer
HDMI
Conn.
TMDS
TMDS
eSPI
eSPI
Heder
CPU
5V FAN(4pin)
PWM
ADC
Hardware
Monitor(+Vcore,+DC in)
GPIO
WDT
USB2#7
TypeC Conn.
(TBT)
TBT/USB3/DP
NUCS BOX-1360P/D4
NUCS BOX-1340P/D4

NUCS BOX-1360P/D4
NUCS BOX-1340P/D4
4 5
English
Chapter 2 Product Overview
is chapter provides diagrams showing the location of important components of
the NUCS BOX-1360/D4 / NUCS BOX-1340P/D4.
2.1 Front View
No. Description
1Audio (Mic-in, Line-out)
2 USB 3.2 Gen2 (Type A)
3 USB4 (Supports DP1.4a display output)
4 USB3.2 Gen2 (Type-C, Supports DP1.4a display output)
1
234

6 7
English
2.2 Rear View
No. Description
1DC-IN
2 2 x HDMI
3 2 x USB3.2 Gen2 Ports (Type A)
4 RJ-45 (2.5G)*
* ere is one LED on the LAN port. Please refer to the table below for the LAN port LED indications.
Activity / Link LED Speed LED
Status Description Status Description
O No Link O 10Mbps connection
Blinking Data Activity Orange 100Mbps/1Gbps
connection
On Link Green 2.5Gbps connection
ACT/LINK LED
SPEED LED
LAN Port
1
234

NUCS BOX-1360P/D4
NUCS BOX-1340P/D4
6 7
English
2.3 Inside View
No. Description
1SO-DIMM Slots
2Wi Module Slot
3 M.2 Slot (2242/2280)
SO-DIMM memory, Wi module and M.2 are not included with this system.
1
2
3

8 9
English
Chapter 3 Hardware Installation
is chapter helps you install or remove important components.
3.1 How to Remove the Bottom Case
1. Remove the four screws on the bottom case.
2. en li up and remove the bottom panel.
2
1

NUCS BOX-1360P/D4
NUCS BOX-1340P/D4
8 9
English
3.2 How to Install the Memory Modules
1. Carefully insert the SO-DIMM memory modules into the slot at a 30-degree angle.
2. Push down until the modules snap into place.
1. e NUCS BOX-1360P/D4 / NUCS BOX-1340P/D4 requires DDR4 SO-DIMM.
2. For dual channel conguration, you always need to install identical (the same brand,
speed, size and chip-type) Memory Module SO-DIMM pairs.
e SO-DIMM only ts in one correct orientation. It will cause permanent damage to the
motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.

10 11
English
3.3 How to Install the WiFi Module
1. Locate the WiFi Module slot on the motherboard.
2. Carefully insert the WiFi Module into the slot.
3. Tighten the screw to secure the WiFi Module to the motherboard.

NUCS BOX-1360P/D4
NUCS BOX-1340P/D4
10 11
English
3.4 How to Install the M.2 SSD (Type 2242)
1. Release and remove the screw.
2. Locate the M.2 slot on the motherboard. Install the stando.

12 13
English
3. Carefully insert the M.2 SSD (Type 2242) into the slot.
4. Tighten the screw to secure the M.2 SSD (Type 2242) to the motherboard.

NUCS BOX-1360P/D4
NUCS BOX-1340P/D4
12 13
English
3.5 How to Install the M.2 SSD (Type 2280)
1. Carefully insert the M.2 SSD (Type 2280) into the slot.
2. Tighten the screw to secure the M.2 SSD (Type 2280) to the motherboard.

14 15
English
3.6 How to Install the VESA Bracket
1. Attach the two screws to the base of the NUCS BOX-1360P/D4 / NUCS BOX-1340P/
D4.
2. Attach the VESA Bracket to the rear of a compatible display using the four screws.
*Choose mounting holes depending on the mounting hole pattern of your LCD
screen (75 mm × 75 mm or 100 mm × 100 mm).