Assa Abloy Corbin Russwin DC8210 Series User manual

Universal Door Closers
with A3 Heavy Duty
Non-Hold Open Parallel Arm
A3 Arm
Heavy Duty Non-Hold Open
IMPORTANT: An improperly installed or incorrectly adjusted door closer may cause
or and will void product warranty.
To avoid personal injury,
property
damage personal injury;
DO NOT DISASSEMBLE THIS DOOR CLOSER BODY.
Door closers must be securely fastened to a properly reinforced door and frame
with fasteners provided.
An auxiliary door stop, BY OTHERS, is required for this Installation.
TO DETERMINE
HAND OF
YOUR DOOR:
LEFT
HAND
DOOR
RIGHT
HAND
DOOR
Size of Door&Door Closer
Type
of
Installation Interior Exterior
In-swinging
Exterior
Out -swinging
Recommended
Closer Size
**Max.
Opening
Force
lbs/f
2 4
2 6
3 0
3 6
4 0
4 6
' "
' "
' "
' "
' "
' "
2 6
3 0
3 6
4 0
' "
' "
' "
' "
8
14
16
22
24
26
1
2
3
4
5
6
Parallel
Arm
RHR LHR
80-9380-8002-152 Rev. 07/09
DC8210 Series
Multi-Sized1thru 6
BEFORE
INSTALLING:
ADA compliant closer: DC8210.
The Americans with Disabilities Act (ADA) requires that doors having door closers
have an opening force not to exceed 5 lbf.
The door closer's power size adjustment feature may require adjustment to its
lowest setting to comply with ADA opening force guidelines.
As Easy As
AC
BF
Installation Instructions
1
**NOTE: These forces are for standard templating with bearing type hinges and do not account for pressure differentials and draft.

5/8
(16)
REF.
DOOR
FRAME
ADAPTER
PLATE
NOTES:
Check hand of door, see page .
Right Hand Application Shown. Left Hand
Opposite.
Dimensions given in inches (mm). Do Not
Scale Drawing.
Closer must be installed inatrue horizontal
plane to ensure proper closer performance.
80-9380-8002-152 Rev. 07/09
SPACER BLOCK
(When required)
2
(50.8)
2
(50.8)
2
(50.8)
1
(25.4)
1-1/2
(38.1)
SEE MOUNTING SCREW
SPECIFICATIONS
NOTE: ANGLE SUPPORT MUST BE
DRILLED AND TAPPED IN THE FIELD
447F14 DOOR
FRAME
MAXIMUM
OPENING Adp BApplication
M85 OPTION 447F14
ANGLE SUPPORT BRACKET
90°
180°
7-1/2
(191)
3-1/2
(89)
11-5/8
(295)
7-5/8
(194)
NON
A.D.A.
C
27-3/4
(705)
23-5/8
(600)
Mark Door and Jamb (for QUIK-INSTALL bracket and arm bracket)
Use template and dimensions charted.
®
Template
5/8
(16)
FRAME STOP
TOP OF DOOR
C
L
HINGE
OR
PIVOT
DOOR
FRAME STOP
2-3/4
(70) 5/8
(16)
1-1/2
(38.1)
1/4
(6.35)
B
A
C
TYP.
15/16
(23.8)
3/4
(19) 1-3/8
(35)
Minimum Clearance
QUIK-INSTALL
BRACKET 754F18
10
(254)
1
(25.4)
3-1/16
(77.8)
1/2
(12.7)
Adp
3
(76.2)
4-3/4
(120.7)
3
(76.2)
3/8
(9.5)
Parallel Arm
2
1
D
C
E
B
This P age Next Page ( , )
3
A F
A
DC8210 x A3 HD Parallel Arm Installation Instructions
Quick Install
Bracket Drop Plate Soffit Bracket
A
7-7/8
(200)
3-7/8
(98)
Clearance
DROP PLATE
Mounting Holes (4)
754F25
L
3/8
(10) 1/4-20 THREAD
Drill thru 9/32 (7) Enlarge to
3/8 (10) Dia. This Side Only
(4 Places)
MOUNTING SCREW SPECIFICATIONS
ARM AND BRACKETQUIK-INSTALL
}
or{Sex nuts, furnished
when ordered
#12-14 self-drilling screw.
1/8 (3) diameter pilot hole
required for Wood
Applications.
DOOR
THICKNESS
SEX NUT
LENGTH “L”
1-3/8 (35)
1-3/4 (44)
& OVER
1-9/32 (33)
1-21/32 (42)
4

80-9380-8002-152 Rev. 07/09
ALL ANGLES SHOWN ARE APPROXIMATE
Connect Arm To Closer
Using 1/8" hex wrench provided, close (turn
clockwise) CLOSING SPEED VALVE (see page
for location on closer). DO NOT OVER TIGHTEN.
Mount QUIK-INSTALL Bracket
®
Open door to approximately 60°.
Using wrench on underside of spindle, rotate spindle
approximately 135° toward hinge edge of door.
Install arm on spindle at an approximate 90° angle to door.
Reopen CLOSING SPEED VALVE.
Install and tighten 5/16 Hex Head Arm Washer and Screw
assembly.
DOOR
SPINDLE
ARM
CENTERLINE
DOOR
90°
SPINDLE
ROTATED 135°
Rotate 135°
SPINDLE AT REST
Mount Arm to Door Frame
#12-24x5/8 FHMS (4)
60°
DOOR
135°
WRENCH
90°
ARM
3
DC8210 x A3 HD Parallel Arm Installation Instructions
B C
D E
Start the four mounting screws into the four closer mounting holes.
Place the closer onto the bracket with the four
mounting screws inserted into the four bracket slots.
QUIK-INSTALL
QUIK-INSTALL
Tighten the four mounting screws to fasten the closer body to the
bracket.QUIK-INSTALL
Mount Closer Body to
BracketQUIK-INSTALL
4
#12-14X1-1/2 FH SELF-DRILLING (6)
#12-14X1-1/2 FH SELF-DRILLING (4)
OR
1/4-20 X 3/4 FHMS W/ SEX NUTS (4)
D
C
E
B
This P age
Previous Page(2)
2
AF
Next Page ( )
4

80-9380-8002-152 Rev. 07/09
Interior Exterior
In
Swing
Exterior
Out
Swing
LATCHING
SPEED VALVE
BACKCHECK
INTENSITY VALVE
CLOSING
SPEED VALVE
SPRING POWER ADJUSTER
(1/4 ALLEN WRENCH)"
Size of Door
(Approx.)
Equivalent
Closer Size
DC8200 SPRING POWER ADJUSTMENT CHART
2 4 (712)
2 6 (764)
3 0 (915)
3 6 (1067)
' "
' "
' "
' "
3
4
5
6
2 6 (764)
3 0 (915)
' "
' "
2 6 (764)
3 0 (915)
3 6 (1067)
4 0 (1219)
' "
' "
' "
' "
Spring Power Adjustment
DC8200 Size1thru 6 Adjustment See Chart
All DC8200 closers are factory set at an approximate
Adjust closer as necessary for door size using this chart.
Readjustment may be required to suit prevailing conditions.
Size 3.
Locate spring power adjuster from Illustration below
Backcheck Intensity Valve
Turn valve COUNTER-CLOCKWISE to reduce backcheck
or CLOCKWISE to increase backcheck. (Backcheck should
be set to give a soft cushioning action, not a sudden stop.)
Latch
C
l
o
s
i
n
g
S
p
e
e
d
B
a
c
k
c
h
e
c
k
D
e
l
a
y
e
d
A
c
t
i
o
n
Option
M71
Full Cover
(Standard)
Latching Speed Valve
After closing speed has been obtained, turn latching speed valve
CLOCKWISE to SLOW latching or COUNTER-CLOCKWISE to
SPEED latching for last 2 to 5 of door travel.
NOTE: Set combination of CLOSING and LATCHING speeds to
between3and 7 seconds Use of door by handicapped,
elderly or small children may require even greater
closing time.
" "
Closing Speed Valve
To adjust speed of door closing from fully open toaposition
2 to 5 from closed, turn Closing Speed Valve CLOCKWISE
to SLOW closing, COUNTER-CLOCKWISE to SPEED
closing.
" "
(1/8 Allen Wrench Provided)
(1/8 Allen Wrench Provided)
Delayed Action Valve
Turn valve CLOCKWISE to SLOW closing, COUNTER-
CLOCKWISE to SPEED closing. Delayed action may be
adjusted from 20 seconds to 90 seconds, depending on
degree of door swing. Delay occurs at the beginning of the
door closing cycle from fully open down to 70°, where the
closing speed valve then begins its control.
(1/8 Allen Wrench Provided)
OPTION M71
DELAYED
ACTION VALVE
Insert is removable.
Place in unused opening.
2-7
7-11
11-15
15-17
Spring Power
Adjustment
No. Full Turns
Clockwise
4
DC8210 x A3 HD Parallel Arm Installation Instructions
Date Stamp
(on end of closer)
MM-YY
MM = Month
YY=Year
Slip cover over closer.
Hold tightly against QUIK-INSTALL® Bracket surface.
Secure on each side with 6-32 x 1/4 PBHMS screws."
Installing Cover
ADJUST CLOSER
F
D
C
E
B
This P age
Previous Page(,)
2
AF
3
Copyright © 2006, 2009, Corbin Russwin, Inc., an ASSA ABLOY Group company. All
rights reserved. Reproduction in whole or in part without the express written permission
of Corbin Russwin, Inc. is prohibited.