AT&T TL30100 User manual

User’s manual
TL30100
DECT 6.0 expansion handset
for use with AT&T models
TL32100/TL32200/TL32300

Audio assist™ is a trademark of Advanced American Telephones.
© 2010 Advanced American Telephones. All Rights Reserved. AT&T and
the AT&T logo are trademarks of AT&T Intellectual Property licensed to
Advanced American Telephones, San Antonio, TX 78219. Printed in China.
Congratulations
on purchasing your new AT&T product. Before using this AT&T
product, please thoroughly read this user’s manual for the
information necessary to install your new AT&T product. For
complete instructions, please refer to the manual provided with
your TL32100/TL32200/TL32300 telephone. For customer
service or product information, please visit our website at
www.telephones.att.com or call 1 [phone]. In
Canada, dial 1 [phone].
The ENERGY STAR® program (www.energystar.gov) recognizes
and encourages the use of products that save energy and
help protect our environment. We are proud to mark this
product with the ENERGY STAR® label indicating it meets the
latest energy efficiency guidelines.
Telephones identified with this logo have reduced noise and
interference when used with most T-coil equipped hearing
aids and cochlear implants. The TIA-1083 Compliant Logo is
a trademark of the Telecommunications Industry Association.
Used under license.
Model #: TL30100
Type: DECT 6.0 expansion handset
Serial #:
Purchase date:
Place of purchase:
Both the model and serial number of your AT&T product can be
found on the bottom of the charger.

Parts checklist
Your telephone package contains the following items. Save
your sales receipt and original packaging in the event warranty
service is necessary.
Charger for cordless handset
with power adapter installed
Cordless handset
User’s manual
Battery compartment cover Battery for cordless handset

i
User’s manual
TL30100
DECT 6.0 expansion handset
for use with AT&T models
TL32100/TL32200/TL32300
Table of contents
Getting started
Quick reference guide .................................2
Charger installation.......................................5
Battery installation and charging...........6
Battery installation.................................6
Battery charging......................................7
Adding the handset to your
telephone base
Adding and registering a handset .........9
About expansion handsets.................9
Registering a handset...........................9
Deregistering all handsets......................11
Appendix
Troubleshooting ...........................................13
Maintenance...................................................23
Important safety information ................24
Safety information ...............................24
Especially about cordless
telephones...............................................25
Precautions for users of implanted
cardiac pacemakers ............................26
Pacemaker patients ............................26
Especially about telephone
answering systems..............................26
FCC Part 68 and ACTA..............................27
FCC Part 15....................................................29
Limited warranty..........................................30
Technical specifications ...........................33
DECT 6.0 digital technology ...........33
Telephone operating range.............33

1
Your product may be shipped with a protective sticker covering
the handset - remove it before use.
For customer service or product information, visit our website at
www.telephones.att.com or call 1 [phone]. In
Canada, dial 1 [phone].
Avoid placing the telephone base too close to:
Communication devices such as television sets, VCRs, or other
cordless telephones.
Excessive heat sources.
Noise sources such as a window with traffic outside, motors,
microwave ovens, refrigerators, or fluorescent lighting.
Excessive dust sources such as a workshop or garage.
Excessive moisture.
Extremely low temperature.
Mechanical vibration or shock such as on top of the washing
machine or work bench.
•
•
•
•
•
•
•
You must install and
charge the battery
before using the cordless
handset.
See pages 5 and 6 for
easy instructions.

2
Getting started
Quick reference guide
DIR/VOLUME
Press to scroll up while
in menus.
Press to increase the
listening volume.
Press to show directory
entries when the
handset is not in use.
While entering names or
numbers in the directory,
press to move the cursor
to the right.
REDIAL/PAUSE
Press repeatedly to view
the last 20 numbers
dialed.
While entering numbers,
press and hold to insert
a dialing pause.
PHONE/FLASH
Press to make or answer
a call.
During a call, press to
answer an incoming call
when you receive a call
waiting alert.
MENU/SELECT
Press to display the
menu.
Once in the menu, press
to select an item or save
an entry or setting.
OFF/CLEAR
During a call, press to
hang up.
While using menus,
press to cancel an
operation, back up to
the previous menu, or
exit the menu display.
Press and hold while the
handset is not in use to
erase the missed calls
indicator.
CID/VOLUME
Press to scroll down
while in menus.
Press to decrease the
listening volume.
Press to show the caller
ID history when the
handset is not in use.
While entering names or
numbers in the directory,
press to move the cursor
to the left.

3
Getting started
Audio assist™ is a trademark of Advanced American Telephones.
Quick reference guide
0
While entering names in
the directory, press to
add a space.
1
While reviewing a caller
ID history entry, press
repeatedly to add or
remove 1 in front of
the telephone number
before dialing or saving
it in the directory.
TONE
During a call, press to
send touch-tone signals
temporarily.
SPEAKER
Press to turn on the
handset speakerphone.
Press again to resume
normal handset use.
MUTE/REMOVE
During a call, press to
mute the microphone.
While predialing, press
to delete digits.
While reviewing the
redial list, directory,
speed dial list or caller
ID history, press to delete
an individual entry.
#
When reviewing a caller
ID history entry, press
repeatedly to view the
dialing options.
AUDIO ASSIST™
During a call, press to
enhance the clarity and
loudness of your caller’s
voice.

4
Getting started
Quick reference guide
EQUALIZER
During an outside call, intercom call, message
or announcement playback, press to change the
quality of the audio to best suit your hearing.
Using menus
Press MENU/SELECT to enter the main menu.
Press DIR or CID to scroll through menu items.
Press MENU/SELECT to select or modify an item.
Press OFF/CLEAR to cancel an operation, back
up to the previous menu, or exit the menu display.
Main menu
Play messages
Answering sys
Directory
Call log
Intercom
Ringers
Settings
Website
The > symbol indicates
the feature to select.
>Play messages
Answering sys

5
Getting started
Install the charger as shown below.
Charger installation
IMPORTANT INFORMATION:
Use only the power adapter provided with this product. To obtain a replacement,
visit our website at www.telephones.att.com or call
1 [phone]. In Canada, dial 1 [phone].
Plug the large end of
the power adapter into
an electrical outlet not
controlled by a wall
switch.
Ensure the small end
of the power adapter is
plugged into the power
jack on the back of the
charger.
Route the cord through
the slot.

6
Getting started
Battery installation and charging
Battery installation
Install the battery as shown below.
IMPORTANT INFORMATION:
Use only the supplied rechargeable battery or replacement battery (model
BT166342). To order, visit our website at www.telephones.att.com,
or call 1 [phone]. In Canada, dial 1 [phone].
To replace the battery, press the tab
and slide the battery compartment
cover downwards. Lift out the old
battery and disconnect it from the
handset. Follow the instructions above
to install and charge the new battery.
Plug the battery
connector securely
into the socket
inside the handset
battery compartment,
matching the color-
coded label.
1. Insert the supplied
battery with the label
THIS SIDE UP facing
up as indicated.
2. Align the cover flat
against the battery
compartment, then
slide it upwards until it
clicks into place.
3.
Charge the handset by placing
it face up in the charger. The
CHARGE light is on when charging.
4.
CHARGE light