AT&T RM 5400 Technical Document

Equipment information
and assembly guide for your AT&T Service
© 2013 AT&T Intellectual Property. All rights reserved. AT&T, Globe logo and other marks are trademarks of AT&T Intellectual Property.
Please ensure that you have set-up the equipment before the date scheduled
with your AT&T Order Manager for Test and Turn Up of your site

The following components are included in your router package:
What’s in the Box
© 2013 AT&T Intellectual Property. All rights reserved. AT&T, Globe logo and other marks are trademarks of AT&T Intellectual Property.
2
Cisco 2901 Router
Router power cable
Site Documentation
Package
RM 5400
RJ11 modem cable
Labelled ISE644
RJ45 Cable
Labelled ISE693
RJ45 Cable
Labelled ISE-10301

Understanding your Router
Rear View of Cisco 2901Front View of Cisco 2901
Power
Socket
On/Off Switch
© 2013 AT&T Intellectual Property. All rights reserved. AT&T, Globe logo and other marks are trademarks of AT&T Intellectual Property.
3
GE0/1
RJ-45 Console Port
GE0/0

Understanding your Modem
© 2013 AT&T Intellectual Property. All rights reserved. AT&T, Globe logo and other marks are trademarks of AT&T Intellectual Property.
4
Rear View of RM 5400Front View of RM 5400

Understanding your RM 5400 Modem
© 2013 AT&T Intellectual Property. All rights reserved. AT&T, Globe logo and other marks are trademarks of AT&T Intellectual Property.
5
Rear Panel of RM 5400
Front Panel of RM 5400 modem

Step 1 Attach Power Cables to Router
© 2013 AT&T Intellectual Property. All rights reserved. AT&T, Globe logo and other marks are trademarks of AT&T Intellectual Property.
6
To power
receptacle
Plug in power cord to router

Step 2: Setup the RM 5400 Modem
© 2013 AT&T Intellectual Property. All rights reserved. AT&T, Globe logo and other marks are trademarks of AT&T Intellectual Property.
7
11
2
3
1. Connect the two antennas to ANT1 and ANT 2
2. Connect the Power Supply and turn the power on.
3. Wait for a couple of minutes till front panel lights are stabilized
4. Setup the RM 5400 Modem where you can get at least 2 Signal Strength lights are lit
5. Move around up to 25 feet from the Router if necessary to get 2 signals.
6. Secure the RM 5400 modem to any permanent fixture

Step 3 Connect RM 5400 Modem to the Router
Connect console cable to the lower
right, blue-edged console port in router
© 2013 AT&T Intellectual Property. All rights reserved. AT&T, Globe logo and other marks are trademarks of AT&T Intellectual Property.
8
To wall jack
RM 5400
RJ45 Cable
Labelled ISE-10301
Connect to more device console ports if needed as shown

Step 4 Connect Router to Access Circuits
Connect the RJ45 cable (from the Smart Jack) to the GE0/0 port (Upper far
right) or per instructions in your Site Documentation Package.
© 2013 AT&T Intellectual Property. All rights reserved. AT&T, Globe logo and other marks are trademarks of AT&T Intellectual Property.
9
RJ45 Cable
Labelled ISE693
To smart jack

Step 5 Connect Router to your Local Network
For connection, plug your Ethernet cable RJ45 into GE0/1 port on back of router
(Lower right) or per instructions in your Site Documentation Package.
© 2013 AT&T Intellectual Property. All rights reserved. AT&T, Globe logo and other marks are trademarks of AT&T Intellectual Property.
10
Customer provide
LAN Cable
Other end of Ethernet cable can be plugged into server, computer, private network, etc.
Power on installed equipment.
Installation is complete