AT&T TL88002 User manual

User’s manual
TL88002
DECT 6.0 2-line
expansion handset
for use with AT&T models
TL88102/TL88202

Congratulations
on your purchase of this AT&T product. Before using this AT&T
product, please read the Important safety information section on
pages 19-21 of this manual. For complete instructions, please refer
to the manual provided with your TL88102/TL88202 telephone.TL88102/TL88202 telephone.telephone.
You can also visit our website at www.telephones.att.com or
call 1 [phone]. In Canada, dial 1 [phone].
This telephone meets the California Energy Commission
regulations for energy consumption. Your telephone is set up to
comply with the energy–conserving standards right out of the box.
No further action is necessary.
Model number: TL88002
Type: DECT 6.0 2-line expansion handset
Serial number: ________________________________________________
Purchase date: ________________________________________________
Place of purchase: _______________________________________________
Both the model and serial numbers of your AT&T product can be
found on the bottom of the charger.
Save your sales receipt and original packaging in case it is
necessary to return your telephone for warranty service.
Telephones identified with this logo have reduced noise and
interference when used with most T-coil equipped hearing aids and
cochlear implants. The TIA-1083 Compliant Logo is a trademark of
the Telecommunications Industry Association. Used under license.
© 2012-2015 Advanced American Telephones. All Rights Reserved. AT&T and
the AT&T logo are trademarks of AT&T Intellectual Property licensed to
Advanced American Telephones, San Antonio, TX 78219. Printed in China.
T
Compatible with
Hearing Aid T-Coil
TIA-1083

Parts checklist
Your telephone package contains the following items. Save your
sales receipt and original packaging in the event warranty service
is necessary.
Battery for
cordless handset
Cordless handset Charger for cordless
handset with power
adapter installed
Battery compartment
cover
User’s manual
Belt clip
User’s manual
TL88002
DECT 6.0 2-line
expansion handset
for use with AT&T models
TL88102/TL88202
THIS SIDE UP / CE CÔTÉ VERS LE HAUT
Battery Pack / Bloc-piles : BT183342/BT283342 (2.4V 400mAh Ni-MH) WARNING / AVERTISSEMENT : DO NOT BURN OR PUNCTURE BATTERIES. NE PAS INCINÉRER OU PERCER LES PILES. Made in China / Fabriqué en chine CR1349

User’s manual
TL88002
DECT 6.0 2-line expansion handset
for use with AT&T models
TL88102/TL88202
Table of contents
Getting started
Installation................................................................................................................1
Quick reference guide - handset...................................................................2
Charger installation..............................................................................................5
Battery installation and charging..................................................................6
Registration and deregistration
Adding and registering handsets..................................................................8
Register a handset to your telephone base........................................8
Deregistering handsets ......................................................................................9
Deregister all handsets from your telephone base.........................9
Appendix
Troubleshooting ..................................................................................................10
Maintenance..........................................................................................................18
Important safety information .......................................................................19
Safety information..........................................................................................19
Especially about cordless telephones..................................................20
Precautions for users of implanted cardiac pacemakers...........21
Pacemaker patients.......................................................................................21
Especially about telephone answering systems.............................21
For C-UL compliance........................................................................................22
Mesures de sécurité importantes...........................................................22
FCC Part 68 and ACTA.....................................................................................26
FCC Part 15...........................................................................................................28
California Energy Commission battery charging testing
instructions.......................................................................................................29
Limited warranty.................................................................................................30
Technical specifications ..................................................................................33
DECT 6.0 digital technology......................................................................33
Telephone operating range.......................................................................33
Redefining long range coverage and clarity.....................................33

1
See pages 6-7
for easy instructions.
You must install and
charge the battery before
using the telephone. STOP!
Installation
Your product may be shipped with a protective sticker covering the
handset display - remove it before use.
For customer service or product information, visit our website at
www.telephones.att.com or call 1 [phone].
In Canada, dial 1 [phone].
Avoid placing the telephone base too close to:
Communication devices such as television sets, VCRs, or other
cordless telephones.
Excessive heat sources.
Noise sources such as a window with traffic outside, motors,
microwave ovens, refrigerators, or fluorescent lighting.
Excessive dust sources such as a workshop or garage.
Excessive moisture.
Extremely low temperature.
Mechanical vibration or shock such as on top of a washing
machine or workbench.
•
•
•
•
•
•
•
Getting started

Quick reference guide - handset
Getting started
2
REDIAL/PAUSE
Press to review the redial list.
While dialing or entering numbers into the
directory, press and hold to insert a dialing
pause.
•
•
DIR/VOLUME
Press to enter the directory when the
telephone is not in use.
Press to scroll up while in menus.
During a call or message playback, press to
increase the listening volume.
While entering names or numbers, press to
move the cursor to the right.
•
•
•
•
LINE 1/FLASH
Press to make or answer a call on line 1.
During a call, press to answer an incoming
call on line 1 when you receive a call waiting
alert.
•
•
1
While reviewing a call log entry, press
repeatedly to add or remove 1 in front of the
telephone number before dialing or saving it
in the directory.
•
/SPEAKER
Press to make or join a call using the first
available line, starting with line 1.
Press to answer a call using the
speakerphone.
During a call, press to switch between
speakerphone and handset use.
•
•
•
CHARGE light
On when the handset is charging in the
telephone base or charger.
•

Quick reference guide - handset
Getting started
3
CID/VOLUME
Press to review the call log when the
telephone is not in use.
Press to scroll down while in menus.
During a call or message playback, press to
decrease the listening volume.
While entering names or numbers, press to
move the cursor to the left.
•
•
•
•
OFF
During a call, press to hang up.
Press and hold while the telephone is not in
use to erase the missed calls indicator.
Press to delete a digit or character while
entering a number or name.
While in a menu, press to cancel an
operation, back up to the previous menu, or
exit the menu display; or press and hold to
return to the idle mode.
•
•
•
•
Soft keys (2)
Press to select a menu item displayed above
the key.
•
LINE 2/FLASH
Press to make or answer a call on line 2.
During a call, press to answer an incoming
call on line 2 when you receive a call waiting
alert.
•
•
# (pound key)
Press repeatedly to show other dialing
options when reviewing a call log entry.
•
INT
Press to initiate an intercom conversation or
transfer a call.
•
HOLD
Press to put a call on hold.•

Quick reference guide - handset
Getting started
Main menu
ANSWERING SYS
DIRECTORY
CALL LOG
RINGERS
SETTINGS
•
•
•
•
•
Using menus:
Press the MENU soft key to show the menu.
Press qCID or pDIR to scroll through menu items.
Press the SELECT soft key to confirm or save changes to a
highlighted menu item.
Press the BACK soft key or OFF to cancel an operation, back
to the previous menu without making any changes, or exit the
menu display.
For complete instructions, refer to the user’s manual provided with
your TL88102/TL88202 telephone system.TL88102/TL88202 telephone system.telephone system.
If you are unable to find your user’s manual, go to
www.telephones.att.com/manuals to read and/or
download the manual.
•
•
•
•
4
Main menu
MENU
HANDSET
12:45am 12/31

IMPORTANT INFORMATION
Use only the power adapter supplied with this product. To order a replacement
power adapter, visit our website at www.telephones.att.com or call
1 [phone]. In Canada, dial 1 [phone].
The power adapter is intended to be correctly oriented in a vertical or floor
mount position. The prongs are not designed to hold the plug in place if it is
plugged into a ceiling, under-the-table or cabinet outlet.
•
•
Plug the power adapter into a
power outlet not controlled by a
wall switch.
5
Charger installation
Install the charger, as shown below.
Getting started

Step 1
Plug the battery connector
securely into the socket
inside the handset battery
compartment. Insert the
supplied battery with the
label THIS SIDE UP facing
up, as indicated.
6
Battery installation and charging
Install the battery, as shown on pages 6-7. Once you have installed
the battery, the screen indicates the battery status (see the
following table). If necessary, place the handset in the telephone
base or charger to charge the battery. For best performance, keep
the handset in the telephone base or charger when not in use. The
battery is fully charged after 16 hours of continuous charging. See
the table on page 33 for battery operating times.
If the screen shows Place handset in charger and flashes, you
need to charge the handset without interruption for at least 30
minutes to give the handset enough charge to use the telephone
for a short time. The following table summarizes the battery charge
indicators and actions to take.
Getting started
Battery indicators Battery status Action
The screen is blank,
or shows Place
handset in charger
and (flashing).
Battery has no or
very little charge. The
handset cannot be used.
Charge without interruption
(at least 30 minutes).
The screen shows
Low battery and
(flashing).
Battery has enough
charge to be used for a
short time.
Charge without interruption
(at least 30 minutes).
The screen shows
HANDSET X.
Battery is charged. To keep the battery charged,
place it in the telephone base or
charger when not in use.
NOTE: If you are on a phone call in low battery mode, you hear four short
beeps every minute.
THIS SIDE UP / CE CÔTÉ VERS LE HAUT
Battery Pack / Bloc-piles :
BT183342/BT283342 (2.4V 400mAh Ni-MH)
WARNING / AVERTISSEMENT :
DO NOT BURN ORPUNCTURE BATTERIES.
NE PAS INCINÉRER OU PERCER LES PILES.
Made in China / Fabriqué en chine BY 1021
THIS SIDE
Battery Pack / Bloc
BT183342/BT283342
WARNING / AVERTISS
DO NOT BURN OR PUN
NE PAS INCINÉRER O
Made in China / Fa