ATOMI Power Pad Qi Operating and safety instructions

Power Pad Qi
30W Wireless Charge Pad
Welcome Guide
NOTE: For iOS devices, the green light
indicating a full charge will not turn on.
Blue light:
Your device is charging.
Green light:
Your device is fully charged
and is in standby mode.
Indicator lights and
what they mean
For questions or concerns, email us at [e-mail]
Manufactured and marketed by Atomi, Inc.
10 West 33rd St. Suite 520, New York, NY 10001
atomi™ is a trademark of Atomi, Inc.
Designed by atomi in New York. Made in China
One-year limited warranty from date of purchase against
defects in materials and workmanship.

Thank you for purchasing
the atomi Power Pad Qi.
The atomi Power Pad Qi is optimized to
work with iPhone®8, iPhone®8 Plus and
iPhone®X, but it also charges any devices
with Qi wireless charging.
Featuring Qi charging technology, you can
charge up to three Qi supported devices
quickly and wirelessly at the same time.
NOTE: If a device is not Qi compatible, you will
need a Qi receiver to charge the device.
What’s Inside
1. Power Pad Qi
2. 5ft power supply
3. Welcome Guide
Specifications
Input: 9V 3.5A
Output A: 5V1A, 9V 1A
Output B: 5V1A, 9V 1A
Output C: 5V1A, 9V 1A
Each charging pad provides
10W of power
Charging Your
Wireless Device
1
Connect the power supply to the wall
outlet and to the charging base.
2
Place the devices on the center of your
Power Pad Qi. Make sure the device is
aligned over the center of the charging base.
Charging will begin on contact.