ATOMI Qi Wireless Charger Operating and safety instructions

Welcome Guide
For questions or concerns, email us at
[e-mail]
Manufactured and marketed by Atomi, Inc.
10 West 33rd St. Suite 520, New York, NY 10001
atomi™ is a trademark of Atomi, Inc.
Designed by atomi in New York. Made in China
One-year limited warranty from date of purchase against
defects in materials and workmanship.
Indicator lights and
what they mean
Qi Wireless Charger
10W Fast Charge
Blue light:
Your device is charging.
Green light:
Your device is fully charged
and is in standby mode.
NOTE: For iOS devices, the green light
indicating a full charge will not turn on.

Thank you for purchasing
the atomi Qi Wireless Charger.
The atomi Qi Wireless Charger features
Qi technology that allows you to charge a
compatible device quickly and wirelessly
through electromagnetic induction.
All you have to do is place any compatible
device on top of the Wireless Charger
Pad to charge it.
NOTE: If a device is not Qi compatible, you will need a
Qi receiver to charge the device.
ATTENTION: You can use any compatible micro USB
cable and 2 amp wall charger to power your Qi
Wireless Charger. Maximum output for the pad is 2
amps, and using a 1 amp charger will result in a longer
charging time.
Specifications
Input: 5V 2A, 9V 1.67A
What’s Inside
1. Qi Wireless Charger
2. Micro-USB cable
3. Welcome Guide
Charging Your
Wireless Device
1
Plug your Qi Wireless
Charger into a USB charger.
(USB charger not included)
2
Place the devices on the center of your
wireless charging pad. Make sure the device is
aligned over the center of the charging base.
Charging will begin on contact.