ATOMI Qi Wireless Wake Operating and safety instructions

Welcome Guide
Charging Your
Wireless Device
1
Plug your Qi Wireless Wake
into a USB charger.
(USB charger not included)
2
Insert the device in your Qi Wireless Wake.
Charging will begin on contact.
Qi Wireless Wake
10W Wireless Charger + 1W Alarm Clock
Indicator lights and
what they mean
Light activates when phone is inserted
and begins charging. Glowing light
slowly cycles between high light to low
light while charging.
NOTE: For iOS devices, the green light
indicating a full charge will not turn on.
Blue light:
Your device is charging.
Green light:
Your device is fully charged
and is in standby mode.
Please use QC 2.0 or higher adapter
to enable fast charge.

Thank you for purchasing
the atomi Qi Wireless Wake.
The atomi Qi Wireless Wake features
Qi technology that allows you to charge a
compatible device quickly and wirelessly
through electromagnetic induction.
All you have to do is place any compatible
device on the Qi Wireless Wake to charge it.
NOTE: If a device is not Qi compatible, you will
need a Qi receiver to charge the device.
What’s Inside
1. Qi Wireless Wake
2. Welcome Guide
For questions or concerns, email us at
[e-mail]
Manufactured and marketed by Atomi, Inc.
10 West 33rd St. Suite 520, New York, NY 10001
atomi™ is a trademark of Atomi, Inc.
Designed by atomi in New York. Made in China
One-year limited warranty from date of purchase against
defects in materials and workmanship.
Setting Up Your Clock
Press clock set button for 3 seconds
to adjust alarm and clock time with scroll
wheel, press clock set again to set time.
Clock time blinks while adjusting.
Rotating scroll wheel
adjusts alarm and time
12:34PM
5:27 AM
Steps
a) Press and hold clock set for
3 seconds to set up time.
b) 1st press for alarm hour setup, 2nd press
for alarm minute setup, 3rd press for hour
setup and 4th press for minute setup.
Scroll wheel to adjust. Press clock set to
confirm and move on to next step.
Returns back to normal mode if no action
is made after 15 seconds.
Snooze:
While the alarm is sounding, press the
snooze button to temporarily silence the
alarm for 5 minutes. Alarm will repeat for
1 minute after 5 minutes of standby.
When the alarm is not ringing, press
snooze to adjust screen brightness
(strong, middle & weak).
Note:
· Alarm icon indicates alarm setup is on.
· At the set time, the alarm will sound
for 1 minute (60 seconds).
· Press clock set once to turn OFF alarm.
Alarm will turn off automatically after
1 minute if no button is pressed.