Auber Instruments AUB6500 User manual

Copyright 2007-2016. Auber Instruments All Rights Reserved.
1/2
Li-ion battery pack for charcoal smoker controller (AUB6500)
Version 1.0 (August 2016)
Warning: To reduce the risk of fire or burns, DO NOT attempt to open, disassemble, or service the battery
pack. DO NOT crash, puncture, short external contacts, or dispose it in fire or water above 140˚F. Please
use supplied charger only.
Important: Must turn on the power switch to charge.
1. Specifications
AUB6500:
Operating/storage temperature: ≤140 ˚F
Capacity: 6500mAH/12V, 15000mAH/5V or
78WH
Voltage input: 12.6VDC
Voltage output: 12VDC (barrel connector), and
5VDC (USB)
Barrel connector: 5.5 mm O.D., 2.1 mm I.D.
Dimension: 124 x 73 x 29 mm (4.9 x 2.9 x 1.2”)
Battery weight: 0.8 lb (12.9 oz)
AUB6500 charger:
Input voltage: 110-240VAC
Output voltage: 12.6VDC
Output maximum current: 1A
2. Names of parts
1 2 3 4 56
Figure 2. Names of parts on battery pack AUB6500.
1. USB (5V DC) power output
2. Power indicator
3. Power output / power input (12V DC)
4. Power switch
5. Testing button for remaining battery level
6. Battery level indicators (4 levels)
3. Package list:

Copyright 2007-2016. Auber Instruments All Rights Reserved.
2/2
Figure 1. Package list (from left to right):
Power adapter, Battery Pack, Output cable for SYL-1615
4. Testing the battery level
1) Flip the power switch on to turn on the battery pack. The red power indicator will lit.
2) Press the battery level testing button once. The battery level indicators will lit.
3) If all four green indicators are lit, estimated 100% power left in this battery. If three green
indicators are lid, estimated 75% power left. If two green indicators are lid, estimated 50% power
left. If one green indicator is lid, only 25% power left.
5. Charging the battery pack
1) Plug in the supplied charger to the wall outlet. A green LED indicator on the charger should lit.
2) Plug in the connector from the charger to the Power Input port on the battery pack.
3) Flip the power switch on to turn on the battery pack. The red power indicator on the battery
pack will lit.
4) The indicator on the charger will turn red when the battery is charging. This indicator will turn
green when the battery is fully charged or when the battery pack is turned off.
6. Using the battery pack with Auber’s SYL-1615 charcoal smoker controller (or charging your mobile
device):
1) Please follow instructions in section 4 to charge the battery before using it with SYL-1615.
2) Connect the power-out port of the battery pack and the power-in port of the SYL-1615 with the
DC power cable (5.5 x 2.1 mm barrel connectors on both ends).
3) If you are charging a mobile device that needs 5VDC (such as a smart phone or a USB speaker),
connect your device and the battery pack with a USB cable. using a USB cable, to either 5V DC
power output socket or 12V DC power output socket on this battery pack.
4) Flip the power switch on to turn on the battery pack. The red power indicator on the battery
pack will lit
Notes
1) With the smart Battery Managing System (BMS), the circuit will be automatically cut-off in case
of any incorrect uses. To restart it, simply recharge it.
2) No USB cable is included.
3) One DC power cable with two 5.5 x 2.1 mm barrel connectors on both ends is included in the kit.
Although one connector is yellow and one connector is black, they are the same. For SYL-1615
controller, there are two barrel connectors: one is 5.5 x 2.1 mm (for power input, on the bottom
left), one is 5.5 x 2.5 mm (for supplying power to the blower). Please identify the correct
connector for before connecting the battery pack to the SYL-1615 controller.