Autonics BWML Series User manual

-|Transparent Guide|-
TCD210011AB
󹮷󹮰󹮰
BWML Series (CC-Link)
CATALOG
For your safety, read and follow the considerations written in the instruction
manual, other manuals and Autonics website.
󹮰󹃔󹮶󹮰󹮶󹮰󹮸󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰
󹮸󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮸
Features
󹮰 󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮷
󹮰󹮰󹮴󹮵
󹮰 󹮰󹮺󹮰󹮰󹮰
󹮰 󹮰󹮰
󹮺󹮰󹮰󹮰󹮴󹮰󹮰󹮰󹮵󹮶󹮰󹮰󹮰󹮰󹮴󹮰󹮰󹮵󹮶󹮰
󹮰󹮰󹮴󹮰󹮰󹮶󹮰󹮵
󹮰 󹮰󹮺󹮰󹮷󹮰󹮴󹮰󹮸󹮶󹮰󹮸󹮵
󹮰 󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰
󹮰 󹮰󹮰󹮶󹮰󹮷󹮰󹮰󹮰󹮶󹮰󹮹󹮰󹮰

󹮰 󹮰󹮰
󹮰󹮰
Safety Considerations
󹮰 󹮰󹮰󹯃󹮰󹯄󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮸
󹮰 󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮸
᜸ Warning󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮸
01. Fail-safe device must be installed when using the unit with machinery that
may cause serious injury or substantial economic loss. (e.g. nuclear power
control, medical equipment, ships, vehicles, railways, aircraft, combustion
apparatus, safety equipment, crime/disaster prevention devices, etc.)
󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮶󹮰󹮰󹮰󹮰
󹃔󹮸
02. Do not use the unit in the place where 󹃖ammable/explosive/corrosive gas,
high humidity, direct sunlight, radiant heat, vibration, impact, or salinity
may be present.
󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹃔󹮸
03. Do not connect, repair, or inspect the unit while connected to a power
source.
󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹃔󹮸
04. Check 'Connections' before wiring.
󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹃔󹮸
05. Do not disassemble or modify the unit.
󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹃔󹮸
06. This product is not safety sensor and does not observe any domestic nor
international safety standard.
󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮶󹮰󹮰
󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮸
᜸ Caution󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮸
01. Use the unit within the rated speci󹃕cations.
󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹃔󹮰󹮰󹮰󹮸
02. Use a dry cloth to clean the unit, and do not use water or organic solvent.
󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹃔󹮸
03. Do not use a load over the range of rated relay speci󹃕cation.
󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹃔󹮶󹮰󹮰󹮶󹮰󹮰󹮶󹮰
󹮰󹮰󹮰󹮰󹮸
Cautions during Use
󹮰 󹮰󹮰󹮰󹮳󹮰󹮰󹮳󹮸󹮰󹮶󹮰󹮰󹮰󹮰󹮰
󹮸
󹮰 󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮹󹮰󹮰󹮰󹮶󹮰
󹮰󹮰󹮰󹮸
󹮰 󹮰󹮰󹮶󹮰󹮰󹮰󹮰󹮰󹮸󹮰󹮰󹮰󹮰󹮰󹮰󹮰
󹮰󹮰󹮰󹮶󹮰󹮰󹮰󹮰󹮰󹃔󹮸
󹮰 󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮶󹮰󹮰󹮸󹮸󹮰󹮰
󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮸󹮸󹮰󹮰󹮰󹮰󹮸󹮰
󹮰 󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮶󹮰󹮰󹮰󹮰󹮰󹮰
󹮰󹮸󹮰
󹮰 󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮶󹮰󹮰
󹮰󹮰󹮰󹮰󹮸
󹮰 󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮸
󹮷󹮰󹮰󹮴󹮰󹮰󹮰󹮰󹮰󹮰󹮳󹃔󹮳󹮵
󹮷󹮰󹮰󹮸󹮰󹮶󹮰󹮰
󹮷󹮰󹮰󹮰
󹮷󹮰󹮰󹮰

-|Transparent Guide|-
Cautions during Installation
󹮰 󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮶󹮰󹮶󹮰󹮰
󹃔󹮰󹮸󹮰󹮰󹮰󹮰󹮰󹮸
󹮷󹮰󹮰󹮰󹮰󹮰󹮴󹃕󹮰󹮵
󹮷󹮰󹮰󹮰󹮰󹮰
󹮷󹮰󹮰󹮰󹯄󹮰
󹮷󹮰󹮰
󹮰 󹮰󹮰󹮰󹮰󹮶󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰
󹮸󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰
󹮰󹮰󹮰󹮸
󹮰 󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮷󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰
󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹃔󹮸
󹮰 󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮸󹮰󹮰󹮰󹮰
󹮰󹯄󹮰󹮰󹮸
󹮰 󹮰󹮰󹮰󹮰󹮰󹮸󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰
󹮰󹮰󹮰󹮰󹮰󹮸󹮰
Product Components
󹮰 󹮰󹮰
󹮰 󹮰󹮰󹮰
󹮰 󹮰󹮰󹮰
󹮰 󹮰󹮰󹮰
󹮰 󹮰󹮰󹮰
Output Connector
󹮰 󹮷󹮰󹮺󹮰󹮰󹮴󹮵󹮶󹮰󹮰󹮴󹮵󹮰󹮴󹮸󹮰󹮰󹮵
󹮰 󹮰󹮰󹃔󹮺󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮸
Speci󹃕cations Manufacture
󹮰󹮰󹮴󹮷󹮶󹮰󹮵  ANYTEK
󹮰󹮰󹮴󹮷󹮶󹮰󹮵  ANYTEK
Ordering Information
󹮰󹮰󹮰󹮰󹮰󹮰󹮰.
󹃔
BWML ❶-❷CL ❸-❹
❶ Sensing target pitch
󹮺󹮰󹮰󹮰󹮰󹮴󹮰󹮰󹮵
❷ Sensing CH
󹮺󹮰󹮰󹮰󹮰
❸ Operation mode
󹮺󹮰󹮰
󹮺󹮰󹮰
❹ CH ordering orientation
󹮷󹮺󹮰󹮰󹮴󹮰󹮰󹮰󹮵
󹮺󹮰󹮰󹮴󹮰󹮰󹮰󹮵
Dimensions
󹮰 󹮺󹮰󹮶󹮰󹮰󹮰󹮰󹮶󹮰󹮰󹮰󹮰󹮸
󹮰 󹮰󹮰󹮰󹮰󹮰󹮰󹃓󹮰󹮰󹮰󹮰󹃔󹮸󹮰
󹮰󹮰󹮰
󹮸󹮰󹮰󹮰󹮰󹮿󹮰󹮰󹮴󹮰󹮰󹮰󹮰󹮰󹮷󹮵󹯀
Length of the
product (L)
Max. sensing area
(mm)
 
 310
 
 
 
 
 
 
 
 
 
 
 1000
 1030
 
 
 1210
 
 
 
 
 
 
 
 
 
 
󹮸
󹮸

L
■Bracket A ■Bracket B
󹮷



30
󹮷󹮸

󹮷
R2
󹮷󹮸


3

󹮷
󹮷



󹮷󹮸

󹮷
󹮷󹮸

30


3
R2
󹮷
Connections
■Power cable connector ■Comm. connector
Connector Pin
no.
Cable
color Func.




 
 
 GND
 󹮸󹮸
Connector Pin
no.
Cable
color Func.




 DA
 DB
 DG
 
󹮴󹮵

-|Transparent Guide|-
Communication Interface
■CC-Link
Control output 󹮷
Version 󹮷󹮰󹮰󹮸󹮰󹮹󹮰󹮷󹮰󹮰󹮸
Association approval 
Type of station 󹮰󹮰
Extended cyclic 󹮷󹮰󹮰󹮸󹮺󹮰󹮷󹮰󹮹󹮰󹮷󹮰󹮰󹮸󹮺󹮰󹮰󹮰󹮴󹮵
Number of occupied
stations 󹮰󹮰󹮷󹮰󹮶󹮰󹮰󹮰󹮷󹮰
Transmission speed 󹮰󹮰󹮹󹮰󹮰󹮰󹮹󹮰󹮸󹮰󹮰󹮹󹮰󹮰󹮰󹮹󹮰󹮰
Max. number of
connection 01) 󹮷
Number of I/O points 󹮰󹮺󹮰󹮷󹮰󹮴󹮹󹮰󹮵󹮶󹮰󹮰󹮺󹮰󹮷󹮰󹮴󹮹󹮰󹮵
󹮰󹮵󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰
󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮷󹮰󹮺󹮰󹮰󹮹󹮰󹮶󹮰󹮸󹮰󹮰
󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮷󹮰󹮺󹮰󹮰󹮰󹮶󹮰󹮸󹮰󹮰
󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮷󹮰󹮺󹮰󹮶󹮰󹮰󹮶󹮰󹮸󹮰󹮰
CC-Link Baud Rate and Address Setting
󹮰 󹮰󹮷󹮰󹮶󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰
󹮸
󹮰 󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮸
󹮰 󹮰󹮰󹮷󹮰󹮶󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮷󹮰󹮰
󹮸
Setting Setting range
B RATE 󹮰 󹮺󹮰󹮰󹮶󹮰󹮺󹮰󹮰󹮶󹮰󹮺󹮰󹮸󹮰
󹮺󹮰󹮰󹮶󹮰󹮺󹮰󹮰󹮶󹮰󹮰󹮰󹮺󹮰󹮰
×10, ×1 󹮰󹮰 󹮺󹮰󹮶󹮰󹮰󹮰󹮺󹮰󹮰󹮶󹮰󹮰󹮰󹮺󹮰󹮰
󹮸󹮸󹮵󹮰󹮰󹮰󹮰󹮰󹮶󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮸
Speci󹃕cations
Model BWML
Sensing method 󹃓󹮰󹃕󹮰
Beam pattern 󹮷󹮰
Light source 󹮰󹮰󹮴󹮰󹮰󹮰󹮵
Sensing distance 󹮰󹮰󹮰󹮰
Sensing target 󹮰󹮰󹮰󹮰
CH ordering
orientation 01) 󹮰󹮴󹮰󹮰󹮰󹮵󹮰󹮹󹮰󹮰󹮴󹮰󹮰󹮰󹮵󹮰 󹮴󹮰󹮵
Sensing CH 01) 󹮰󹮰󹮰
Sensing target pitch 01) 󹮰󹮰󹮰󹮰󹃔
Response time 󹮰󹮰
Operation mode 01) 󹮰󹮰󹮹󹮰󹮰󹮰󹮴󹮰󹮵
Function 󹮰󹮰󹮶󹮰󹮰󹮰󹮶󹮰󹮰󹮰
󹮶󹮰󹮰󹮶󹮰󹮷
Indicator 󹮰󹮰󹮴󹮵󹮶󹮰󹮰󹮰󹮴󹮵󹮶󹮰
󹮰󹮰󹮴󹮶󹮰󹮶󹮰󹮵
Approval 󹮰󹮰󹮵
Weight (packaged) 󹮸󹮰󹮰󹮴󹮰󹮸󹮰󹮵󹮰󹮴󹮰󹮰󹮷󹮵
󹮰󹮵󹮰󹮰󹮰󹮰󹮸
󹮰󹮵󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹃔󹮰󹮸
Power supply 󹮰󹮰󹮴󹮰󹮷󹮺󹮰󹮰󹮰󹮵
Current consumption 󹮰󹮸󹮰
Protection circuit 󹮰󹮰󹮰󹮶󹮰󹮰󹮰󹮰
󹮰
Insulation resistance 󹮰󹮰󹮰󹮴󹮰󹮰󹮵
Noise immunity 󹮰󹮰󹮰󹮰󹮰󹮰󹮰
󹮴󹮺󹮰󹮰󹮶󹮰󹮺󹮰󹮰󹮶󹮰󹮰󹮺󹮰󹮰󹮵
Dielectric strength
󹮰󹮰󹮰󹮰󹮰󹮰󹮸󹮸󹮰
󹮺󹮰󹮰󹮰󹮰󹮹󹮰󹮰󹮰󹮰󹮰
󹮰󹮰󹮰󹮰󹮰󹮸󹮸󹮰
󹮺󹮰󹮶󹮰󹮰󹮰󹮹󹮰󹮰󹮰󹮰󹮰
󹮰󹮰󹮰󹮰󹮰󹮰󹮰
󹮺󹮰󹮶󹮰󹮰󹮰󹮹󹮰󹮰󹮰󹮰󹮰
Vibration 󹮸󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮴󹮰󹮰󹮵󹮰󹮰
󹮰󹮶󹮰󹮶󹮰󹮰󹮰󹮰󹮰
Shock 󹮰󹮹󹮰󹮴󹮰󹮰󹮵󹮰󹮰󹮰󹮶󹮰󹮶󹮰󹮰󹮰󹮰󹮰
Ambient temperature 󹮰󹮰󹮰󹮶󹮰󹮺󹮰󹮷󹮰󹮰󹮰󹮰󹮴 󹮰󹮰󹮰 󹮵
Ambient humidity 󹮰󹮰󹮰󹮶󹮰󹮺󹮰󹮰󹮰󹮰󹮰󹮴 󹮰󹮰󹮰 󹮵
Protection rating 󹮰󹮴󹮰󹮵
Material 󹮺󹮰󹮶󹮰󹮰󹮰󹮰󹮰󹮺󹮰
Mode Switching Method
RUN
󹮽󹮾󹮰󹮰 →Background
sensing mode 󹮽󹮾󹮰󹮰 →
RUN
󹮽󹮾󹮰󹮰 →Installation
guide mode 01) 󹮽󹮾󹮰󹮰 →
󹮽󹮶󹮰󹮾󹮰 →Sensing level setting 󹮽󹮶󹮰󹮾󹮰 →
󹮽󹮾󹮰󹮵 →Output option 󹮽󹮾󹮰󹮰 →
󹮰󹮵󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮽󹮾󹮰󹮰󹮰󹮶󹮰󹮰󹮰󹮰󹮰󹮰󹮰
󹮰󹮰󹮰󹮰󹮸
󹮰󹮵󹮰󹮰󹮰󹮰󹮰0󹮶󹮰󹮰󹮽󹮾󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮸
Installation and Adjustment
󹮰 󹮰󹮰󹮰󹮰󹮰󹮴󹃕󹮰󹮵󹮰󹮰󹮰󹮶󹮰󹮰󹮰󹮰
󹮰󹮰󹮰󹮰󹮰󹮰󹮴󹃕󹮰󹮵󹮸
󹮰 󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮸󹮰󹮸
󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮸󹮰󹮶󹮰󹮰󹮰󹮰
󹮸
󹮵󹮰
󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰
󹮰󹮰󹮰󹮰󹮸
󹮵󹮰
󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰
󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰
󹮰󹮰󹮰󹮰󹮸
󹮵󹮰
󹮰󹮰󹮸
󹮵󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰
󹮰󹮸󹮰󹮰󹮰󹮰󹮰
󹮰󹮶󹮰󹮰󹮰󹮶󹮰󹮰󹮰
󹮰󹮸
󹮵󹮰
󹮰󹮶󹮰󹮰󹮰󹮰󹮰󹮰
󹮰󹮰󹮰󹮰󹮸
󹮵󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮶󹮰󹮰󹮰󹮰
󹮰󹮰󹮰󹮰󹮰󹮰󹮰
󹮰󹮰󹮸󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰
󹮶󹮰󹮰󹮰󹮰󹮰󹮰󹮸
󹮰
󹮰
Unit Descriptions
5
1
3
4
2
1󹮰󹮰󹮴󹮵
2󹮰󹮰󹮴󹮵
3󹮰󹮰󹮴󹮶󹮰󹮶󹮰󹮵
4󹮰
5󹮰󹮰
5
6
1
3
4
2
1
󹮰󹮺󹮰
󹮰󹮰󹮰󹮰󹮰󹃔󹮰󹮶󹮰󹮰󹮰󹮶󹮰
󹮰󹮹󹮸󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮶󹮰󹮰󹮰
󹮰󹮰󹮸
2󹮸󹮰󹮰󹮺󹮰
󹮰󹮰󹮰󹮰󹮰󹮰󹮸
3󹮰󹮰
4󹮸󹮰󹮰󹮰󹮰󹮴󹮰󹮵󹮺󹮰
󹮰󹮰󹮰󹮷󹮰󹮰󹮸
5󹮸󹮰󹮰󹮰󹮺
󹮰󹮰󹮰󹮷󹮰󹮸󹮰󹮴󹮺󹮰1󹮶󹮰󹮺󹮰0󹮵
6󹮷󹮰󹮸󹮰

-|Transparent Guide|-
Operation Timing Chart
■Light ON mode
ON
OFF
ON
OFF
ON
OFF
Stable light ON area
Unstable area
Stable light OFF area
󹮰
󹮴󹮵
󹮰
󹮴󹮵
󹮷󹮰
OFF Level
ON Level
Received
light
󹮰 󹮰󹮰󹮰󹮶󹮰󹮰󹮰󹮰󹮸󹮰
Operation Indicator
ON ●OFF ◑󹮰󹮰󹮸󹮰󹮰
■CH indicator
Item Output
(red)
Stability
(green) Item Output (red)
Stability
(green)
Stable light ON Unstable light OFF  
Unstable light ON Stable light OFF 
■Status indicator
Item
Output
indicator
(red)
Stability
indicator
(green LED)
Operation indicator
Operation
display
CC-Link
output 01)
  
Normal operation 󹮷 
 󹮷
Background
sensing mode
 󹮰󹮴󹮰󹮵 󹮰󹮴󹮰󹮵  
B
󹮰
󹮰󹮰󹮰󹮶󹮰
󹮰󹮳󹮳󹮰󹮰

󹮰 󹮰󹮴󹮰󹮵 󹮰󹮴󹮰󹮵   󹮰󹮰
󹮰󹮰
Installation guide mode
󹮰󹮰
󹮰
󹮰󹮴󹮰󹮰
󹮰󹮵
󹮰󹮴󹮰󹮵
 
N󹮰󹮰
󹮰󹮰
󹮰󹮰
󹮰󹮰

󹮰󹮴󹮰󹮰
󹮰󹮵   
󹮰 󹮰󹮴󹮰󹮵 
T󹮰
󹮰󹮰
󹮰󹮰
󹮰

󹮰󹮰󹮰
󹃕󹮰󹮰󹮰  T󹮰 󹮷
󹮰 󹮰󹮰󹮰󹮹󹮰
󹮰󹮰  E󹮰
󹮰
󹮰󹮰󹮰󹮶󹮰
󹮰󹮳󹮳󹮰󹮰

Channel
interference error

󹮰
󹮰󹮰
󹮰󹮸󹮰󹮰

󹮰󹮴󹮰󹮵 󹮷
󹮰
󹮰󹮰󹮰󹮶󹮰
󹮰󹯃󹯄󹮰󹮰

Disturbing light
sensing alarm
󹮰
󹮰
󹮰󹮰󹮰
󹮰󹮰󹮸󹮰󹮰

󹮰󹮴󹮰󹮵  󹮷
󹮰
󹮰󹮰
󹮰󹮰󹮶󹮰
󹮰󹮳󹮳󹮰󹮰

Emitter/
receiver
damage
alarm
02)


󹮰󹮴󹮰
󹮵 󹮰󹮴󹮵
  B
󹮰󹮳󹮳󹮰󹮰
󹮹󹮰
󹮰󹮶󹮰
󹮰󹮳󹮳󹮰󹮰

󹮰
 󹮰󹮴󹮰󹮶󹮰󹮵 󹮰󹮴󹮵
Comm. error
󹮰
󹮰 󹮰󹮰󹮸󹮰󹮰    E󹮰
󹮰󹮰󹮰󹮶󹮰
󹮰󹯃󹯄󹮰󹮰

󹮰
󹮹

󹮰
󹮴󹮰
󹮵
󹮰󹮴󹮰󹮵 C
󹮰󹮵󹮰󹮰󹮰󹮰󹮸
󹮰󹮵󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮶󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮶󹮰󹮰
󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮸󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹃕󹮰󹮰󹮸󹮰󹮰
󹮸
■Communication status indicator
CC-Link Comm. status indicator
STATE  󹮰󹮴󹮰󹮵
RD/SD OFF
STATE  󹮰󹮴󹮰󹮵
RD/SD 󹮰󹮹󹮰󹮰󹮹󹮰󹮰
Functions
■Background sensing mode
󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰
󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮸󹮰
󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹃕󹮰󹮰󹮰󹮰
󹮰󹮰󹮰󹮸
■Installation guide mode
󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰
󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮸󹮰
󹮰󹮰󹮰󹮰󹮰󹮰󹮽󹮾󹮰󹮰󹮰󹮸
■Sensing level setting
󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮸󹮰
󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰
󹮰󹮰󹮰󹃓󹮰󹃕󹮸󹮰󹮰󹮰󹮰󹮰󹮸
󹮰
󹮰󹮰󹮰󹮴󹮰󹮵
󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰
󹮺󹮰󹮰

󹮺󹮰󹮰
󹮰
󹮰
󹮰
󹮰
󹮰
󹮰
󹮰
󹮰
■Output option
󹮰󹮰󹮰󹮶󹮰󹮰󹮽󹮾󹮰󹮰󹮰󹮰󹮰󹮸
Output
option
(status
display)
Description Additional
option
Output
option
(status
display)
Description Additional
option
0󹮰󹮰
󹮰 4󹮰 󹮰
A󹮺󹮰󹮰
B󹮺󹮰󹮰
1󹮰󹮰
 F󹮺󹮰
B󹮺󹮰
5󹮷󹮰

1󹮺󹮰󹮰󹮸
2󹮺󹮰󹮰󹮸
2󹮰 6
󹮷󹮰
󹮰󹮰

1󹮺󹮰󹮰󹮰󹮰
2󹮺󹮰󹮰󹮰󹮰
3󹮰 L󹮺󹮰󹮰
D󹮺󹮰󹮰
■Self-diagnosis
󹮰󹮰󹮰󹮷󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰
󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮸󹮰
󹮰 󹮰󹮰
󹮺󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰
󹮰󹮰󹮰󹮸
󹮰 󹮰󹮰󹮰
󹮺󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰
󹮸󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹃓󹮰󹮶󹮰󹮰
󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮸
󹮰 󹮰󹮹󹮰󹮰󹮰
󹮺󹮰󹮰󹮰󹮰󹮹󹮰󹮰󹮰󹮰󹮰󹮰󹮷󹮰󹮰󹮰
󹮹󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮸

-|Transparent Guide|-
󹮶󹮰󹮷󹮰󹮷󹮶󹮰󹮷󹮶󹮰󹮶󹮰󹮰󹮰󹮶󹮰
www.autonics.com | [phone] | [e-mail]
Troubleshooting
Malfunction Cause Troubleshooting
󹮷 󹮰 󹮰󹮰󹮰󹮸
󹮰󹮶󹮰 󹮰󹮰󹮸
󹮷󹮰󹮰

󹮰󹮰󹮰󹮰 󹮰󹮰󹮰󹮰󹮰󹮰󹮰
󹮰󹮰󹮰󹮸
󹮰󹮰 󹮰󹮰󹮰󹮰󹮰
󹮸
󹮰󹮰
󹮰󹮰
󹮰󹮰󹮰󹮰

󹮰󹮰󹮰󹮰󹮰
󹮰󹮸
󹮰󹮰󹮰󹮰󹮰󹮰
󹮰󹮸
󹮰󹮰󹮶󹮰󹮰󹮶󹮰
󹮰󹮰󹮰󹮸