Avalue Technology ARC-15W32 User manual

Part No. E2017A521A2R
ARC-15W32
15.6" 6th Gen Intel® Core™ Processor i7/i5/i3 Fanless
Rugged Touch Panel PC with IET Expansion
Quick Reference Guide
3rd Ed –26 August 2020
Copyright Notice
Copyright 2020 Avalue Technology Inc., ALL RIGHTS RESERVED.

ARC-15W32
2 ARC-15W32 Quick Reference Guide
FCC Statement
THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS
FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST
HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A
COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN
RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTATLLED AND USED IN
ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL
INTERFERENCE TO RADIO COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE
HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO
CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
A Message to the Customer
Avalue Customer Services
Each and every Avalue’s product is built to the most exacting specifications to ensure
reliable performance in the harsh and demanding conditions typical of industrial
environments. Whether your new Avalue device is destined for the laboratory or the factory
floor, you can be assured that your product will provide the reliability and ease of operation
for which the name Avalue has come to be known.
Your satisfaction is our primary concern. Here is a guide to Avalue’s customer services. To
ensure you get the full benefit of our services, please follow the instructions below carefully.
Technical Support
We want you to get the maximum performance from your products. So if you run into
technical difficulties, we are here to help. For the most frequently asked questions, you can
easily find answers in your product documentation. These answers are normally a lot more
detailed than the ones we can give over the phone. So please consult the user’s manual
first.
To receive the latest version of the user’s manual; please visit our Web site at:
http://www.avalue.com.tw/

Quick Reference Guide
ARC-15W32 Quick Reference Guide
3
Content
1. Getting Started ........................................................................................................7
1.1 Safety Precautions....................................................................................................7
1.2 Packing List...............................................................................................................7
1.3 System Specifications...............................................................................................8
1.4 System Overview....................................................................................................12
1.4.1 I/O View................................................................................................................................. 12
1.5 System Dimensions ................................................................................................13
2. Hardware Configuration .......................................................................................14
2.1 ARC-15W32 connector mapping.............................................................................15
2.1.1 Serial port 1 connector (COM1)............................................................................................. 15
2.1.2 Serial port 2 connector (COM2)............................................................................................. 15
2.2 Installing Hard Disk & Memory................................................................................16
2.3 Installing ARC-BYT DB ...........................................................................................18
2.4 ARC-SKLU Overviews ............................................................................................20
2.5 ARC-SKLU Jumper and Connector list...................................................................21
2.6 ARC-SKLU Jumpers & Connectors settings ...........................................................22
2.6.1 Clear CMOS (JCOMS1) ........................................................................................................ 22
2.6.2 Serial port 1/2 pin9 signal select (JRI1/JRI2) ........................................................................ 22
2.6.3 LCD backlight brightness adjustment (JBKLSEL1)............................................................... 23
2.6.4 AT/ATX Input power select (JAT1)........................................................................................ 23
2.6.5 Serial port 1 in RS-232/422/485 mode (JCOM1_SEL1)........................................................ 24
2.6.6 LCD Inverter connector (JBKL1) ........................................................................................... 24
2.6.7 On-board header for USB2.0 (JUSB1).................................................................................. 25
2.6.8 On-board header for USB2.0 (JUSB2).................................................................................. 25
2.6.9 Battery connector (JBAT1).................................................................................................... 26
2.6.10 LCD backlight brightness adjustment (JBLK_CTRL1) .......................................................... 26
2.6.11 LVDS connector (JLVDS1).................................................................................................... 27
2.6.12 AMPLIFIER_R (JSPR1) ........................................................................................................ 28
2.6.13 AMPLIFIER_L (JSPL1).......................................................................................................... 28
2.6.14 SPI connector (JSPI1)........................................................................................................... 29
2.6.15 EC Debug connector (JEC1)................................................................................................. 29
2.6.16 B2B connector (JB2B1)......................................................................................................... 30
2.6.17 Touch panel connector (JTP1) .............................................................................................. 31
2.6.18 General purpose I/O connector (JGPIO1)............................................................................. 31

ARC-15W32
4 ARC-15W32 Quick Reference Guide
2.6.19 SATA Power connector (SATAPW1)..................................................................................... 32
2.6.20 Power connector (PWR1)...................................................................................................... 32
2.7 ARC-BYT DB-A/B/C/D/E/F/G/H/K Overviews .........................................................33
2.7.1 ARC-BYT DB-A ..................................................................................................................... 33
2.7.2 ARC-BYT DB-B ..................................................................................................................... 33
2.7.3 ARC-BYT DB-C..................................................................................................................... 33
2.7.4 ARC-BYT DB-D..................................................................................................................... 34
2.7.5 ARC-BYT DB-E ..................................................................................................................... 34
2.7.6 ARC-BYT DB-F...................................................................................................................... 34
2.7.7 ARC-BYT DB-G..................................................................................................................... 35
2.7.8 ARC-BYT DB-H..................................................................................................................... 35
2.7.9 ARC-BYT DB-K ..................................................................................................................... 35
2.8 ARC-BYT DB-A/B/C/D/E/F/G/H/K Connector list....................................................36
2.8.1 ARC-BYT DB-A ..................................................................................................................... 36
2.8.2 ARC-BYT DB-B ..................................................................................................................... 36
2.8.3 ARC-BYT DB-C..................................................................................................................... 36
2.8.4 ARC-BYT DB-D..................................................................................................................... 36
2.8.5 ARC-BYT DB-E ..................................................................................................................... 36
2.8.6 ARC-BYT DB-F...................................................................................................................... 37
2.8.7 ARC-BYT DB-G..................................................................................................................... 37
2.8.8 ARC-BYT DB-H..................................................................................................................... 37
2.8.9 ARC-BYT DB-K ..................................................................................................................... 37
2.9 ARC-BYT DB-D Connectors settings......................................................................39
2.9.1 Serial Port 1 connector (D_COM1)........................................................................................ 39
2.9.2 Serial Port 2 connector (D_COM2)........................................................................................ 39
2.10ARC-BYT DB-E Jumpers & Connectors settings....................................................40
2.10.1 CAN2.0 Switch (E_JCAN20) ................................................................................................. 40
2.10.2 For user update FW (E_JBOOT0)......................................................................................... 40
2.10.3 For user update FW (E_JIAP1) ............................................................................................. 41
2.11ARC-BYT DB-F Connectors settings ......................................................................43
2.12ARC-BYT DB-G Connectors settings......................................................................44
2.12.1 Serial Port 1 connector (G_COM1) ....................................................................................... 44
2.12.2 Serial Port 2 connector (G_COM2) ....................................................................................... 44
2.12.3 Serial Port 3 connector (G_COM3) ....................................................................................... 45
2.13ARC-BYT DB-H Jumpers settings...........................................................................45
2.13.1 USB Power selector (H_USB_PWR_SEL1).......................................................................... 45
2.14ARC-BYT DB-H Connectors settings......................................................................46
2.14.1 Serial Port 1 connector (H_COM1)........................................................................................ 46
2.14.2 Serial Port 2 connector (H_COM2)........................................................................................ 46
2.15ARC-BYT DB-K Connectors settings......................................................................47

Quick Reference Guide
ARC-15W32 Quick Reference Guide
5
2.15.1 Serial Port 1 connector (I_COM1)......................................................................................... 47
2.15.2 Serial Port 2 connector (I_COM2)......................................................................................... 47
3.BIOS Setup....................................................................................................................48
3.1 Introduction .............................................................................................................49
3.2 Starting Setup .........................................................................................................49
3.3 Using Setup ............................................................................................................50
3.4 Getting Help............................................................................................................51
3.5 In Case of Problems................................................................................................51
3.6 BIOS setup..............................................................................................................52
3.6.1 Main Menu............................................................................................................................. 52
3.6.1.1 System Language............................................................................................................................53
3.6.1.2 System Date....................................................................................................................................53
3.6.1.3 System Time....................................................................................................................................53
3.6.2 Advanced Menu..................................................................................................................... 53
3.6.2.1 Trusted Computing ..........................................................................................................................54
3.6.2.2 APCI Settings ..................................................................................................................................54
3.6.2.3 AMT Configuration...........................................................................................................................56
3.6.2.4 PCH-FW Configuration....................................................................................................................57
3.6.2.5 IT8528 Super IO Configuration........................................................................................................57
3.6.2.5.1 Serial Port 1 Configuration...............................................................................................................58
3.6.2.5.2 Serial Port 2 Configuration...............................................................................................................59
3.6.2.5.3 Serial Port 3 Configuration...............................................................................................................59
3.6.2.5.4 Serial Port 4 Configuration...............................................................................................................60
3.6.2.5.5 Serial Port 5 Configuration...............................................................................................................60
3.6.2.6 H/W Monitor.....................................................................................................................................61
3.6.2.7 S5 RTC Wake Settings....................................................................................................................61
3.6.2.8 Serial Port Console Redirection.......................................................................................................62
3.6.2.8.1 Legacy Console Redirection Settings..............................................................................................62
3.6.2.9 CPU Configuration...........................................................................................................................63
3.6.2.10 Intel TXT Configuration....................................................................................................................63
3.6.2.11 SATA Configuration.........................................................................................................................64
3.6.2.12 Network Stack Configuration ...........................................................................................................65
3.6.2.13 CSM Configuration...........................................................................................................................65
3.6.2.14 USB Configuration...........................................................................................................................66
3.6.3 Chipset................................................................................................................................. 67
3.6.3.1 System Agent (SA) Configuration ..................................................................................................67
3.6.3.1.1 Graphics Configuration....................................................................................................................68
3.6.3.1.2 Memory Configuration......................................................................................................................69
3.6.3.2 PCH-IO Configuration....................................................................................................................70
3.6.3.2.1 PCI Express Configuration...............................................................................................................70

ARC-15W32
6 ARC-15W32 Quick Reference Guide
3.6.3.2.1.1 PCI Express Root Port5 (i210/211) ......................................................................... 71
3.6.3.2.1.2 PCI Express Root Port8 (B2B mPCIe) .................................................................... 72
3.6.3.2.1.3 PCI Express Root Port12 (mPCIe) .......................................................................... 73
3.6.3.2.2 USB Configuration...........................................................................................................................74
3.6.3.2.3 HD Audio Configuration...................................................................................................................74
3.6.4 Security................................................................................................................................ 75
3.6.4.1 Secure Boot menu...........................................................................................................................76
3.6.4.1.1 Key Management.............................................................................................................................77
3.6.5 Boot...................................................................................................................................... 77
3.6.6 Save and exit....................................................................................................................... 78
3.6.6.1 Save Changes and Reset................................................................................................................79
3.6.6.2 Discard Changes and Reset............................................................................................................79
3.6.6.3 Restore Defaults..............................................................................................................................79
3.6.6.4 Launch EFI Shell from filesystem device.........................................................................................79

Quick Reference Guide
ARC-15W32 Quick Reference Guide
7
1. Getting Started
1.1 Safety Precautions
Warning!
Always completely disconnect the power cord from your
chassis whenever you work with the hardware. Do not
make connections while the power is on. Sensitive
electronic components can be damaged by sudden power
surges. Only experienced electronics personnel should
open the PC chassis.
Caution!
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution,
use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded
bag when they are not in the chassis.
1.2 Packing List
1 x ARC-15W32 Panel PC
1 x Power Adapter
4 x screws for VESA
4 x screws for HDD
10 x screws for Wall Mount
10 x brackets for Wall Mount
10 x plastics spacer for Wall Mount

ARC-15W32
8 ARC-15W32 Quick Reference Guide
1.3 System Specifications
Component
Mother Board
ARC-SKLU
CPU
6th Gen Intel® Core™ i5-6300U, 2-Core, 2.4GHz processor
CPU Cooler(Type)
Fanless Heatsink
Memory
One 260-pin SODIMM Socket Up to 16GB DDR4 2133 SDRAM
Power Supply
DC in
Adapter
60W power adaptor
Speaker
2 W*2
Wireless LAN
Optional by USB or MPCIe module
Bluetooth
Optional
Operating System
Ubuntu, Windows 7/ 10
Expansion Card
Compatible to all ARC-BYT DB modules (BIOS auto adjusted)
Expandable interface (1 x DP, 1 x PCIex1, 4 x USB, 1 x LPC, 1 x Audio (line
in, line out, mic in)
1 x mini-PCIe Socket
Storage
Hard Disk Drive
1 x 2.5” Drive Bay
Solid State Drive
1 x 2.5” Drive Bay
Other Storage Device
1 x mSATA supports on the 1st Mini PCIe slot, Auto switch for mSATA or Mini
PCIe
Panel
LCD Panel
15.6", 1366 x 768
B/L Inverter/Converter
LCD built in
Touch Screen
P-cap
Touch Controller
EETI
External I/O
Serial Port
1 x DB-9 COM1 (RS-232/422/485, selectable by BIOS & JUPMER, RS-485
supports Auto Flow, Pin-9 selected by Ring/+5V/+12V)
1 x DB-9 COM2 (RS-232, Pin-9 selected by Ring/+5V/+12V)
USB Port
4 x USB3.0 (2 x Double deck)
DIO Port
16-bit GPIO
Audio Port
Realtek ALC892 HD codec
LAN Port
1 x I219LM PHY, 1 x Intel I211AT GbE controller
Wireless LAN Antenna
3 x Antenna
Indicator Light
HDD LED, Power LED (Green for Power, Yellow for HDD)
Expansion Slots
1* mini PCIe full size (support half size)

Quick Reference Guide
ARC-15W32 Quick Reference Guide
9
1 x mSATA supports on the 1st Mini PCIe slot, Auto switch for mSATA or Mini
PCIe
Internal I/O
1 x SATA connector & 1 x 2-pin wafer SATA power connector
1 x 2x20-pin Hirose connector for 2x24-bit LVDS
1 x 5-pin lockable connector for inverter backlight control with dimming
(PWM/DC mode & backlight brightness selected by BIOS as standard)
2 x 3-pin header for LCD backlight brightness adjustment (dimming) (as
ECM-BYT2 w/ light/dark, VR, DC/PWM)
1 x 3-pin header for CMOS (protect*Clear)
1 x 2 x 3-pin header for COM1/ 2 pin 9 signal selection (+5, +12, Ring,
selected by jumper)
1 x 2 x 3-Pin header for SPI
1 x 2 x 6-pin wafer for front panel
1 x 3-pin header for Power mode(AT/ATX)
1 x Buzzer
2 x 2-pin wafer for speaker out (as ARC-SKLU)
1 x 5-pin 90 degree pin header for touch connector
1 x 1 x 5 pin wafer for 1 USB 2.0 (For USB WiFi)
2 x 6 pin wafer for SM bus (Reserved for smart battery)and 8bit GPIO
1 x 80-pin board to board connector for Expansion board
(Hirose FX18-80P-0.8SH & FX18-80S-0.8SH)
Mechanical
Power Type
AT/ATX
Power Requirement
DC +12V ~ +26V, wide voltage single power input
TVS component for surge protection
Reverse current/voltage protection
ACPI
Single power ATX Support S0, S3, S4, S5 and ACPI 3.0 Compliant
Power Connector
Type
2.5mm Lockable DC Jack (as EBM-BYT), co-lay with phoenix connector
Dimension
391.2 x 239.2 x 57.5 mm
Weight
3.7 Kgs
Color
Front: Die-Casting with Cover lens; Rear: Black Casting-Aluminum
Fanless
Yes
OS Support
Linux, Ubuntu, Windows 7/10
Reliability
EMI Test
CE/ FCC class B
Dust and Rain Test
Front Panel IP65, Rear IP41 except I/O
Vibration Test
HDMI + Mini PCIe w/ SIM slot (ARC-BYT DB-C)
Mechanical Shock
Random Vibration Operation:

ARC-15W32
10 ARC-15W32 Quick Reference Guide
Test
1. PSD: 0.03622G²/Hz , 1.5 Grms
2. operation mode
3. Test Frequency : 5-500Hz
4. Test Axis : X,Y and Z axis
5. 30 minutes per each axis
6. IEC 60068-2-64 Test:Fh
7. Storage : CF or SSD
Sine Vibration test (Non-operation)
1 Test Acceleration : 2G
2 Test frequency : 5~500 Hz
3 Sweep：1 Oct/ per one minute. (logarithmic)
4 Test Axis : X,Y and Z axis
5 Test time :10 min. each axis
6 System condition : Non-Operating mode
7. Reference IEC 60068-2-6 Testing procedures
Package vibration test
1. PSD: 0.026G²/Hz , 2.16 Grms
2. Non-operation mode
3. Test Frequency : 5-500Hz
4. Test Axis : X,Y and Z axis
5. 30 min. per each axis
6. IEC 60068-2-64 Test:Fh
1. Wave form：Half Sine wave
2. Acceleration Rate：20g for operation mode
3. Duration Time：11ms
4. No. of Shock：+/- X,Y,Z axis 3 times
5. Test Axis: +/- X,Y,Z axis
6. Operation mode
7. Reference IEC 60068-2-27 Testing procedures Test Eb : Shock Test
Drop Test
Package drop test
1 One corner , three edges, six faces
2 ISTA 2A, IEC-60068-2-32 Test:Ed
Operating
Temperature
-10 ~ +50 degree C
Operating Humidity
0 ~ 90% Relative Humidity, Non-condensing
Storage Temperature
-20 ~ 60 degree
Compliant with
following Flexible

Quick Reference Guide
ARC-15W32 Quick Reference Guide
11
Expansion Modules
ARC-BYT DB-A
4 x USB3.0 module
ARC-BYT DB-B
3 x Audio Jack (Line in/Line out/Mic in)+HDMI
ARC-BYT DB-C
HDMI + Mini PCIe (w/ SIM slot)
ARC-BYT DB-D
2 x COM Isolation module
ARC-BYT DB-G
3 x COM (w/o isolation, RS-232 only)
ARC-BYT DB-H
2COM (RS-232) + 1USB 2.0
ARC-BYT DB-K
2COM (RS-232) + 1LAN
ARC-BYT DB-E
12-bit GPIO+CAN Bus
ARC-BYT DB-F
CAN Bus for OBDII
Note: Specifications are subject to change without notice.

ARC-15W32
12 ARC-15W32 Quick Reference Guide
1.4 System Overview
1.4.1 I/O View
Connectors
Label
Function
Note
DC-IN
DC Power-in connector
Default: Lockable DC Jack
Option: Phoenix Connector(MOQ apply)
COM1/2
Serial port 1/2 connector
DB-9 male connector
USB
4 x USB 3.0 connector
LAN1/2
RJ-45 Ethernet 1/2
LED
HDD/Power LED indicator
Power Switch
Power on button

Quick Reference Guide
ARC-15W32 Quick Reference Guide
13
1.5 System Dimensions
(Unit: mm)

ARC-15W32
14 ARC-15W32 Quick Reference Guide
2.Hardware
Configuration
For advanced information, please refer to:
1- ARC-SKLU, ARC-BYT DB-A/B/C/D/E/F/G/H/K included in this manual.
Note: If you need more information, please visit our website:
http://www.avalue.com.tw

Quick Reference Guide
ARC-15W32 Quick Reference Guide
15
2.1 ARC-15W32 connector mapping
2.1.1 Serial port 1 connector (COM1)
RS-485
Signal
PIN
PIN
Signal
DATA-
1
6
NC
DATA+
2
7
NC
NC
3
8
NC
NC
4
9
NC
GND
5
Please set BIOS & JCOM1_SEL1
RS-232
Signal
PIN
PIN
Signal
NDCDA#
1
6
NDSRA#
NRXDA
2
7
NRTSA#
NTXDA
3
8
NCTSA#
NDTRA#
4
9
NRIA#
GND
5
RS-422
Signal
PIN
PIN
Signal
TxD-
1
6
NC
TxD+
2
7
NC
RxD+
3
8
NC
RxD-
4
9
NC
GND
5
Please set BIOS & JCOM1_SEL1
2.1.2 Serial port 2 connector (COM2)
Signal
PIN
PIN
Signal
NDCDB#
1
6
NDSRB#
NRXDB
2
7
NRTSB#
NTXDB
3
8
NCTSB#
NDTRB#
4
9
NRIB#
GND
5

ARC-15W32
16 ARC-15W32 Quick Reference Guide
2.2 Installing Hard Disk & Memory
Step 1. Memory Installation: Remove 3 screws to release the chassis cover, and remove it.
Step 2.1 Insert the SODIMM into the memory socket.
Step 2.2 Re-assemble your system back through previous steps to complete the installation.

Quick Reference Guide
ARC-15W32 Quick Reference Guide
17
Step 3. HDD Installation: Insert the HDD into the Drive Bay and fasten 2 screws.

ARC-15W32
18 ARC-15W32 Quick Reference Guide
2.3 Installing ARC-BYT DB
Step 1. Unfasten 2 screws of the HDD bracket and take it off.
Step 2. Remove 4 screws to release the chassis cover, and remove it.

Quick Reference Guide
ARC-15W32 Quick Reference Guide
19
Step 2.1 Insert the ARC-BYT DB into the socket and fasten 3 screws.
Step 2.2 Re-assemble your system back through previous steps to complete the installation

ARC-15W32
20 ARC-15W32 Quick Reference Guide
2.4 ARC-SKLU Overviews