Avision FF-2110B User manual

Mobile Scanner
User’s Manual
Regulatory model: FF-2110B
Avision Inc.

User’s Manual
ii
Trademarks
Microsoft is a U.S. registered trademark of Microsoft
Corporation.
Windows 7, Windows 8, and Windows 10/11 are either registered
trademarks or trademarks of Microsoft Corporation in the United
States and/or other countries.
Other brands and product names herein are trademarks or
registered trademarks of their respective holders.
Copyright
All rights reserved. No part of this publication may be
reproduced, transmitted, transcribed, stored in a retrieval
system, or translated into any language or computer language,
in any form or by any means, electronic, mechanical, magnetic,
optical, chemical, manual, or otherwise, without the prior
written permission of Avision Inc.
Material scanned by this product may be protected by
governmental laws and other regulations, such as copyright
laws, the customer is solely responsible for complying with all
such laws and regulations.
Warranty
The information contained in this document is subject to
change without notice.
Avision makes no warranty of any kind with regard to this
material, including, but not limited to, the implied warranties
of fitness for a particular purpose.
Avision shall not be liable for errors contained herein or for
incidental or consequential damages in connection with the
furnishing, performance, or use of this material.

User’s Manual
iii
FCC Radio Frequency Interference Statement
This product has been tested and found to comply with the
limits for a class B digital device, pursuant to Part 15 of the
FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that may
cause undesired operation. The FCC Class B limits are
designed to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult your point of purchase or service representative
for additional suggestions.

User’s Manual
iv
European Union Regulatory Notice
Products bearing the CE marking comply with the following EU
Directives:
Low Voltage Directive 2014/35/EC
EMC Directive 2014/30/EC
Restriction of the use of certain hazardous substances
(RoHS) Directive 2011/65/EU
This product satisfies the Class B limits of EN55032, EN55035,
and safety requirements of EN62368-1.
*This machine is certified as Class 1 LED product.

User’s Manual
v
Disposal of Waste Equipment by Users in Private Union
This symbol on the product or on its packaging indicates that
the product can not be disposed of with your other household
waste. Instead it should be sent to appropriate facilities for
recovery and recycling in an effort to protect human health and
the environment. Fore more information about where you can
drop off your waste equipment for recycling, please contact
your local city office, your household waste disposal service or
the shop where you purchased the product.
System Requirements
CPU:
Intel®Core™ 2 Duo or higher
Memory:
32 bit: 2 GB
64 bit: 4 GB
Optical Drive:
DVD-ROM Drive
USB Port:
USB 2.0
Compatible
Operating
System:
Microsoft Windows 7, Windows 8 (32 bits/64
bits), Windows 10 (32 bits/64 bits), Windows
11

User’s Manual
vi
Product Safety Guide
Please clearly read all these instructions, and follow all instructions
and warnings before installing and using the device.
The following indications are used in this document to obviate any
chance of accident or damage to you and/or the device.
WARNING
Indicates potentially hazardous situations, which
if instructions are not followed, could result in
death or serious injury.
CAUTION
Indicates a potentially hazardous situation
which, if instructions are not followed, may
result in minor or moderate injury or damage to
property.
WARNING
Use only the USB cable that came with your device and avoid
abrasions, cuts, fraying, crimping, and kinking. Using any
other USB cable could cause fire, electrical shock, or injury.
Place the device close enough to the computer so that the
interface cable can easily reach between the device and the
computer.
Do not place or store the device:
Outdoors
Near excessive dirt or dust, water, or heat sources
In locations subject to shocks, vibrations, high
temperature or humidity, direct sunlight, strong light
sources, or rapid changes in temperature or humidity
Do not use the device with wet hands.
Never disassemble, modify, or attempt to repair the device or
device option by yourself, except as specifically explained in
the device's documentation. This could cause fire, electrical
shock, or injury.

User’s Manual
vii
Unplug the device and the USB cable, and refer servicing to
qualified service personnel under the following conditions:
Liquid has entered the device.
Object has entered the device.
The device has been dropped, or the case has been
damaged.
The device does not operate normally (i.e. appearance of
smoke, strange smell, odd noise, etc.), or exhibits a
distinct change in performance.
Unplug the device and the USB cable before cleaning.
CAUTION:
Do not locate the device on rackety or aslope tables. Do not
locate the device on unstable surface. The device may fall
down and this may result in injury.
Do not place heavy objects on the unit. It may cause
unbalance and the device may fall down. This may result in
injury.
Store the AC Power cord/USB cable bundled out of the reach
of children to avoid the risk of injury.
Keep plastic bags bundled out of the reach of children or
throw them away to avoid the danger of suffocation.
If you are not going to use the device for a long period,
unplug the USB cable from the electrical outlet.

User’s Manual
1-1
1. Introduction
Congratulations on your purchase of the color sheet-fed
image scanner. Avision is one of the leading companies to
make high quality color image scanner.
Before you install and operate the new scanner, please take
a few minutes to read through this manual. It provides
proper instructions for you to unpack, install, operate and
maintain the scanner.
1.1 Package Contents
The following figure illustrates the package contents. Please
check all the items against the checklist. If there is anything
missing, please contact your authorized local dealer
immediately.
1. Scanner Main Unit
2. USB Cable
3. Calibration Sheet
4. Quick Guide





User’s Manual
1-2
1.2 Top view
Item
Name
Description
1
Feeder slot
left edge
Insert original into the feed slot,
printed side UP and aligned with
the left edge to begin scanning.
2
Feed slot
Feed your original to the slot.
3
Sliding
paper guide
Slide the guide up to the right
edge of the original before
inserting original into the feed slot
to ensure proper alignment when
scanning.
4
Power
button
Press to turn on the scanner.
Long press to turn off the
scanner.
In ready mode, press to start
a scan using PaperAir software
application.
3
3
1
2
5
4

User’s Manual
1-3
5
Status
Indicator
Light
Blinking
green
The scanner is in
power-saving mode.
Press the Power button
to wake from sleep.
Green
The scanner is ready to
scan.
Blinking
red
An error has occurred.
Top cover is opened or
the document is
jammed.

User’s Manual
1-4
1.3 Rear view
Item
Name
Description
1
USB Type-C
Connect to a computer via
a micro USB cable.
1

User’s Manual
2-1
2. Scanner Installation
2.1 Precautions
Keep the scanner out of direct sunlight. Direct exposure
to the sun or excessive heat may cause damage to the
unit.
Do not install the scanner in a humid or dusty place.
Place the scanner securely on an even, flat surface.
Tilted or uneven surfaces may cause mechanical or
paper-feeding problems.
Retain the scanner box and packing materials for
shipping purposes.

User’s Manual
2-2
2.2 Removing the Protective Tape
Remove the protective tapes on the scanner and inside the
document feeder as illustrated in below.





User’s Manual
2-3
2.3 Connecting to the Computer
1. Connect the USB connector to the USB port of the scanner.
2. Connect the other USB connector to the USB port on your
computer.
3. The computer should detect a new USB device and prompt
a “New Hardware Found” message.
4. When the Finish dialog is prompted, click the Finish
button.

User’s Manual
2-4
2.4 Turning on the Power
Press the Power button on the front panel, the Power LED
will flash. When it is finished and ready to scan, the LED
indicator will stop flashing and become steadily on. To turn
off the scanner, press the Power button for about 3 seconds,
the Power LED will be off.

User’s Manual
2-5
2.5 Installing the Software
NOTE:
The scanner driver contains TWAIN, and WIA driver. After the
installation of scanner driver is completed, this scanner allows
you to scan via a TWAIN, or a WIA interface. Start your
TWAIN-compliant image editing software application to select a
TWAIN or WIA user interface. You may also launch Microsoft’s
Scanner and Camera Wizard to scan via a WIA user interface.
1. Download [Avision Update] at
http://www.avision.com/install.
2. Run [Avision Update.exe].
3. The End User License Agreement screen will be prompted.
Read the agreement and then choose [I Agree].

User’s Manual
2-6
4. After your scanner has been recognized, click [Next] to
continue.
5. The available software applications will be prompted.
Select the applications to install. Click [Install] and follow
the on-screen instructions to complete the installation.
*The list of available software applications varies according
to your product type.

User’s Manual
2-7
Contents on the installation graphic:
Driver: To communicate with your scanner, you need
to install the scanner driver.
PaperAir: To use the buttons on the scanner, you
need to install PaperAir.
AVScan X/PaperPort: To scan and organize your
multi-page document(s), you can install the software
application to manage them easily and effectively.
Alternatively,
You may also download driver and manual at
www.avision.com/download.

User’s Manual
3-1
3. Completing Your First
Scan
3.1 Suitable and unsuitable original types
Suitable Original
The scanner is designed to obtain the best scanning results
with the following types of originals:
Photos and documents (3”x5”, 4”x6”, 5”x7”, 8.5”x14”) (76
x 127mm, 102 x 152 mm, 127 x 177 mm, 216 x 356 mm)
Business cards [standard 3.5”x 2” (88 x 50 mm)or larger]
Long page (8.5”x36”) (216 x 914 mm) for 300 dpi only
Unsuitable Original Type
Do not use the following types of originals for scanning, or the
scanner may malfunction or cause the original to jam in the
slot.
Originals thicker than 0.8 mm
Originals with either side shorter than 50 mm
Originals with lots of black or dark colors
Originals with dark colors surrounding the edges
Printed media (newspapers, magazines, etc.)
Soft and thin materials (thin paper, cloth, etc.)
Originals that are curled or wrinkled
Originals with staples or paper clips

User’s Manual
3-2
3.2 Insert Your Document
Important!
Insert only one page at a time, and insert the next one
only when the previous one is done. Otherwise, the
scanner may malfunction.
The paper detector is quite sensitive. Please do not push
your document into the feeding slot or the top of your
image will be cut. Simply let go the photo (card) when it
begins to feed into the slot.
Document(s) should be free of staples, paper clips, paper
sticky notes.
1. Insert your document FACE UP to the feeder and align it
to the left edge of the feeder.
2. Slide the guide lever against the right side of the original.
3. Gently push the original into the feed slot.