AXIOMTEK CAPA318 User manual

4 9418E318010E
© Copyright 2018 Axiomtek Co., Ltd.
Version A2 ctober 2018
Printed in Taiwan
Quick Start
CN2
The basic procedures required to power on CAPA318:
(1). Require power at minimum 2.22A. Ensure that power supply is
OFF before connecting to CAPA318 and that all necessary
peripheral devices are plugged properly.
(2). Make sure all of the jumpers and switch are at default settings;
especially SW1 (1-2 close).
(3). Firmly install DDR3L memory module into connector SDIMM1
until fully seated.
(4). Firmly insert power to ATX1.
(5). Install a momentary on/off button/switch onto CN2, pin 5 and 6.
(6). Turn on the power supply.
(7). Press the on/off button/switch to power on CAPA318.
CAPA318 Series Quick Installation Guide
9418E318010E 1
© Copyright 2018 Axiomtek Co., Ltd.
Version A2 ctober 2018
Printed in Taiwan
Checklist

CPU
b
oard x1

USB cable x1 (optional)

Product information CD
x1

Audio cable x1 (optional)

Quick
i
nstallation
g
uide
x1

COM
cable x1
(optional)
Note: Please contact your local vendors if any damaged or missing items. DO
NOT apply power to the board if there is any damaged component.
Connectors
Connector Description
CN1
USB 2.0 Wafer Port 3 and 4
CN2
Front Panel Connector
CN3 Inverter Connector
CN4
SMBus/
I
2
C Con
nector
CN5
LVDS Connector
CN6
SMBus Connector
CN9 SATA Power Connector
CN11
Digital I/O Connector
CN1
2
COM2
Wafer
Connector
CN13
Audio Connector
CN14
Audio Jack
FAN1
Fan Connector
COM1
COM1 Connector
SATA1 SATA Connector
USB1
USB 3.0 Port
1
and
2
VGA1
VGA Connector
ATX1
ATX Power
Connector
LAN1~2
Ethernet Port 1 and 2
SCN1
Full
-
size PCI
-
Express Mini Card
and mSATA
Connector
SCN2
Full
-
size PCI
-
Express Mini Card Connector
SCN3 SIM Card Slot
SDIMM1
DDR3L
SO
-
DIMM Connector
CAPA
31
8
Intel
®
Pentium
®
/Celeron
®
Processor
3.5
”
Board

2 9418E318010E
© Copyright 2018 Axiomtek Co., Ltd.
Version A2 ctober 2018
Printed in Taiwan
Jumper Settings
Before applying power to the CAPA318, please make sure all of the
jumpers are in factory default positions.
Jumper/Switch
Description Setting
JP1 LVDS +3.3V/+5V/+12V Voltage Selection
Default: +3.3V 1-2 Close
JP2 Restore BIOS Optimal Defaults
Default: Normal Operation 1-2 Close
SW1 Auto Power On
Default: Disable 1-2 Close
Note: Please refer to the CAPA318 series product information CD for the
complete user’s manual, drivers and utilities. User’s manual and related
documents are in Acrobat PDF format.
Board Layout
Top View
9418E318010E 3
© Copyright 2018 Axiomtek Co., Ltd.
Version A1 ctober 2018
Printed in Taiwan
Bottom View
Side View