AXIOMTEK SBC81210 Series User manual

SBC81210 Series Quick Installation Guide
©Copyright 2011 Axiomtek Co., Ltd.
Version A1 September 2011
Printed in Taiwan
94181210010E
4
V. Board Layout
Please refer to the SBC81210 Series Product Information CD for the complete User’s Manual, drivers and utilities. User’s Manual and related
SBC81210 Series Quick Installation Guide
©Copyright 2011 Axiomtek Co., Ltd.
Version A1 September 2011
Printed in Taiwan
94181210010E
1
I. Checklist
9CPU Board x 1
9Quick Installation Guide x 1
9Product Information CD-ROM x 1
9SATA Cable x 1
9COM , Printer Port Cable with
Bracket, Pitch=2.0mm x 1
9Mini Jumper 2Pin P=2.54mm x 3
9Mini Jumper 2Pin P=2.0mm x 6
9FDD Cable x1
Note: Please contact your local vendors if any damaged or missing items.
DO NOT apply power to the board if any damaged components.
II. Jumper Settings
Proper jumper settings configure the SBC81210 to meet your
application purpose. We are herewith listing a summary table of all
jumpers and default settings for onboard devices, respectively.
Jumper Description Jumper Setting
JP1 COM2 Mode Selection: RS-232 Short 1-2
JP2 COM2 Mode Selection: RS-232 Short 3-5 , 4-6
JP3 COM2 Mode Selection: RS-232 Short 3-5 , 4-6
JP4 Power On Control Mode Short 1-2
JP7 CMOS Clear Short 1-2
Please refer to the SBC81210 Series Product Information CD for the complete User’s Manual, drivers and utilities. User’s Manual and related

SBC81210 Series Quick Installation Guide
©Copyright 2011 Axiomtek Co., Ltd.
Version A1 September 2011
Printed in Taiwan
94181210010E
2
III. Connectors
Connector Label Connector Label
Axiomtek Front Panel CN1 USB0 Connector USB1
SMBUS Pin Header CN3 USB1 Connector USB2
LAN2 Extenal LED CN4 USB Port2.3 USB3
LAN1 Extenal LED CN5 USB Port4.5 USB4
VGA Connector CN6 SATA 0 6Gb(SATA3) SATA1
DISPLAY Connector
(Optional) CN7 SATA Port 1 SATA2
Axiomtek
ACPI Connector CN8 SATA Port 2 SATA3
Keyboard Connector KB1 SATA Port 3 SATA4
Mouse Connector MS1 CPU FAN FAN1
COM1 Connecter COM1 SYS FAN FAN2
COM2 Connecter COM2 AUX FAN FAN3
RJ45 (WG82579LM) LAN1 Print Connecter PRN1
RJ45 (WG82583) LAN2 Floppy Connecter FDD1
ATX 4X2 Connector ATX2 Audio Link HDA1
Plea
Please refer to the SBC81210 Series Product Information CD for the complete User’s Manual, drivers and utilities. User’s Manual and related
SBC81210 Series Quick Installation Guide
©Copyright 2011 Axiomtek Co., Ltd.
Version A1 September 2011
Printed in Taiwan
94181210010E
3
IV. Front Panel Connector (CN1)
zPower LED
This 3-pin connector denoted as Pin 1 and Pin 5 connects the
system power LED indicator to such a switch on the case. Pin
1 is assigned as +, and Pin 5 as -. The Power LED lights up
when the system is powered ON. Pin 3 is defined as GND.
zExternal Speaker and Internal Buzzer Connector
Pin 2, 4, 6 and 8 can be connected to the case-mounted
speaker unit or internal buzzer. While connecting the CPU card
to an internal buzzer, please short pins 2-4; while connecting
to an external speaker, you need to set pins 2-4 to Open and
connect the speaker cable to pin 8 (+) and pin 2 (-).
zATX Power On/Off Button
This 2-pin connector denoted as Pin 9 and 10 connects the
front panel’s ATX power button to the CPU card, which allows
users to control ATX power supply to be power on/off.
zSystem Reset Switch
Pin 11 and 12 can be connected to the case-mounted reset
switch that reboots your computer instead of turning OFF the
power switch. It is a better way to reboot your system for a
longer life of the system’s power supply.
zHDD Activity LED
This connection is linked to hard drive activity LED on the
control panel. LED flashes when HDD is being accessed. Pin
13 and 14 connect the hard disk drive to the front panel HDD
LED, Pin 13 assigned as -, and Pin 14 as +.
Please refer to the SBC81210 Series Product Information CD for the complete User’s Manual, drivers and utilities. User’s Manual and related