Barco MDPC-8127 User manual

ENABLING BRIGHT OUTCOMES
User guide
27”8MP ultra-high definition digital pathology display
MDPC-8127

Registered office: Barco NV
President Kennedypark 35, 8500 Kortrijk, Belgium
www.barco.com/en/support
www.barco.com
Barco NV
Beneluxpark 21, 8500 Kortrijk, Belgium
www.barco.com/en/support
www.barco.com

3R5913216 /03 MDPC-8127
1 Welcome!.......................................................................................................................................................................................................... 5
1.1 Regulatory compliance information.........................................................................................................................................6
1.2 Technical specifications..................................................................................................................................................................7
1.3 What’s in the box................................................................................................................................................................................9
1.4 Product overview.............................................................................................................................................................................10
2 Installation and setup.........................................................................................................................................................................13
2.1 Display controller installation....................................................................................................................................................14
2.2 Display position adjustment ...................................................................................................................................................... 14
2.3 Cable connections..........................................................................................................................................................................15
2.4 MXRT driver and Intuitive Workflow Tools installation ...............................................................................................16
2.5 QAWeb Enterprise registration ...............................................................................................................................................16
2.6 VESA-mount installation.............................................................................................................................................................17
2.7 VESA-mount installation in portrait mode .........................................................................................................................19
3 Daily operation .........................................................................................................................................................................................21
3.1 Recommendations for daily operation ................................................................................................................................22
3.2 Standby switching...........................................................................................................................................................................22
3.3 OSD menu use.................................................................................................................................................................................23
4 Advanced operation............................................................................................................................................................................25
4.1 OSD menu language ....................................................................................................................................................................26
4.2 OSD menu orientation..................................................................................................................................................................26
4.3 OSD menu automatic close function....................................................................................................................................26
4.4 Power lock function........................................................................................................................................................................26
4.5 DPMS mode.......................................................................................................................................................................................27
4.6 Hibernate ............................................................................................................................................................................................. 27
4.7 Luminance target ............................................................................................................................................................................28
4.8 Color presets ..................................................................................................................................................................................... 28
4.8.1 Color temperature.......................................................................................................................................................28
4.8.2 Color coordinates........................................................................................................................................................29
4.9 Color space ........................................................................................................................................................................................29
4.10 Viewing modes.................................................................................................................................................................................29
4.11 Display functions .............................................................................................................................................................................30
4.12 sRGB .....................................................................................................................................................................................................30
4.13 Ambient Light Compensation (ALC).....................................................................................................................................31
Table of contents

R5913216 /03 MDPC-81274
4.14 Reading rooms.................................................................................................................................................................................31
4.15 Continuous Ambient Light Compensation (ALC)..........................................................................................................32
4.16 Embedded QA ..................................................................................................................................................................................32
4.16.1 About Embedded QA................................................................................................................................................32
4.16.2 DICOM status report .................................................................................................................................................32
4.16.3 DICOM compliance check .....................................................................................................................................33
4.16.4 DICOM calibration ...................................................................................................................................................... 33
4.16.5 Reset DICOM calibration........................................................................................................................................33
4.16.6 DICOM error threshold.............................................................................................................................................34
4.17 Image scaling....................................................................................................................................................................................34
4.18 Image source selection................................................................................................................................................................34
4.19 Grayscale conversion modes...................................................................................................................................................35
4.20 DisplayPort standard version ................................................................................................................................................... 35
4.21 EDID timings......................................................................................................................................................................................35
4.22 Display info.........................................................................................................................................................................................36
4.23 Display status....................................................................................................................................................................................36
5 Cleaning your display........................................................................................................................................................................37
5.1 Cleaning instructions.....................................................................................................................................................................38
6 Important information.........................................................................................................................................................................39
6.1 Safety information...........................................................................................................................................................................40
6.2 Cybersecurity ....................................................................................................................................................................................41
6.3 Environmental information.........................................................................................................................................................41
6.4 EMC notice ......................................................................................................................................................................................... 43
6.5 Explanation of symbols................................................................................................................................................................46
6.6 Legal disclaimer...............................................................................................................................................................................49
6.7 Open source license information ...........................................................................................................................................50

5R5913216 /03 MDPC-8127
Welcome! 1

R5913216 /03 MDPC-81276
1.1 Regulatory compliance information
Indications for use
Barco digital pathology display is intended to display digital images of histopathology slides for review and
interpretation by trained medical practitioners.
For USA specifically: The Barco MDPC-8127 device is intended for in vitro diagnostic use to display digital
images of histopathology slides acquired from IVD-labeled whole-slide imaging scanners and viewed using
IVD-labeled digital pathology image viewing software that have been validated for use with this device. It is an
aid to the pathologist to review and interpret digital images of histopathology slides for primary diagnosis. It is
the responsibility of the pathologist to employ appropriate procedures and safeguards to assure the validity of
the interpretation of images using the MDPC-8127. The display is not intended for use with digital images from
frozen section, cytology, or non-formalin-fixed, paraffin embedded (non-FFPE) hematopathology specimens.
Intended usage environment
The device is intended for surgical pathology tasks performed in the anatomic pathology laboratory or a
physician’s office.
Contra-indications
The device is not intended for use with frozen section, cytology, or non-formalin-fixed paraffin embedded
(FFPE) hematopathology specimens.
Intended users
Barco pathology displays are intended to be used by trained medical practitioners.
The device is initially set up by trained integrators or medical IT staff.
Expected clinical benefits
The device aids in pathology diagnosis.
Notice to the user and/or patient
Any serious incident that has occurred in relation to the device should be reported to the manufacturer and the
competent authority of the Member State in which the user and/or patient is established.
Factory addresses
•Barco NV, President Kennedypark 35, 8500 Kortrijk, Belgium
•Fimi S.r.l., Via Saul Banfi 1, 21047 Saronno, VA, Italy
Manufacturing country
The manufacturing country of the product is indicated on the product label (“Made in …”).
Importers contact information
To find your local importer, contact one of Barco’s regional offices via the contact information provided on our
website (www.barco.com).
FCC class B
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this device does cause harmful interference to radio or television reception, which can be determined by
Welcome!

7R5913216 /03 MDPC-8127
turning the device off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the device and receiver.
•Connect the device into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
FCC responsible: Barco Inc., 3059 Premiere Parkway Suite 400, 30097 Duluth GA, United States, Tel: +1
678 475 8000
Canadian notice
CAN ICES-1/NMB-1
1.2 Technical specifications
Overview
Screen technology IPS LCD with LED backlight
Active screen size
(diagonal)
684 mm (27")
Active screen size (H x V) 569 x 335 mm (22.4 x 13.2")
Aspect ratio (H:V) 16:9
Resolution 8MP (3840 x 2160 pixels @ 120 Hz)
Pixel pitch 0.155 mm
Color imaging Yes
Gray imaging Yes
Color depth 10 bit (1.07 billion possible colors)
Viewing angle (H, V) 178°
Screen surface treatment Anti-Glare coating
Uniformity Technology PPU
Color calibration sRGB, SteadyColor (with QAWeb Enterprise), DICOM GSDF, Native
Color gamut NTSC 115% (typical)
Color gamut sRGB 132% (typical)
Color gamut DCI-P3 105% (typical)
Ambient light presets Yes, reading room selection
Ambient light sensor Yes
Front sensor Yes, I-Guard
Maximum luminance (panel
typical)
850 cd/m²
Calibrated luminance 450 cd/m²
Contrast ratio (panel typical) 1000:1
Welcome!

R5913216 /03 MDPC-81278
sRGB Delta E2000 (typical) < 1 (average)
< 3 (maximum)
Response time ((Tr + Tf)/2)
(typical)
8 ms
Housing color Black / White
Video input signals 2x DisplayPort 1.2
USB ports 1x USB 2.0 upstream (endpoint)
2x USB 2.0 downstream
Power rating 100-240 Vac, 50/60 Hz, 3.6-1.6 A
Power consumption 75 W (nominal) @ calibrated luminance of 450 cd/m²
< 0.5 W (hibernate)
< 0.5 W (standby)
Dimensions with stand (W x
H x D)
651 x 482~582 x 238 mm
Dimensions w/o stand (W x
H x D)
651 x 390 x 66 mm
Dimensions packaged (W x
H x D)
800 x 650 x 295 mm
Net weight with stand 12.5 kg
Net weight w/o stand 7.9 kg
Net weight packaged 17.4 kg (without optional accessories)
Tilt -5° to +25°
Swivel -30° to +30°
Pivot N/A
Height adjustment range 100 mm
Mounting standard VESA (100 mm)
Recommended modalities Digital Pathology and Whole Slide Imaging
Certifications FDA 510(k) K203364
CE1639 (Medical Device Class IIa)
CCC (China)
Safety specific:
•IEC 60950-1:2005 + A1:2009 + A2:2013
•EN 60950-1:2006 + A1:2010 + A11:2009 + A12:2011 + A2:2013
•IEC 60601-1:2005 + A1:2012
•EN 60601-1:2006 + A1:2013 + A12:2014
•ANSI/AAMI ES 60601-1:2005 + R1:2012
•CAN/CSA C22.2 No. 60601-1:2014
•PSE
EMI specific:
•IEC 60601-1-2:2014 (ed.4)
•EN 60601-1-2:2015 (ed.4)
•FCC part 15 Class B
•ICES-001 Level B
•VCCI
Welcome!

9R5913216 /03 MDPC-8127
Environmental:
China Energy Label, EU RoHS, China RoHS, REACH, Canada Health,
WEEE, Packaging Directive
Supplied accessories User guide
Documentation disc
Video cables
Mains cables
USB cable
Barco Touchpad
Optional accessories MXRT display controller
QA software QAWeb Enterprise
Warranty 5 years, including 20000 hrs backlight warranty
Operating temperature 0 °C to 35 °C (20 °C to 30 °C within specs)
Storage temperature -20 °C to 60 °C
Operating humidity 8% to 80% (non-condensing)
Storage humidity 5% to 85% (non-condensing)
Operating pressure 50 kPa minimum
Storage pressure 50 to 106 kPa
1.3 What’s in the box
Overview
•MDPC-8127 display
•Barco Touchpad
•Printed user guide
•Documentation disc, containing different languages of this user guide and the Barco “Display Controller
and Intuitive Workflow Tools”user guide
•System sheet
•Cables for Mains, Video and USB
If you ordered a Barco MXRT display controller, it is also in the box together with its accessories. A dedicated
user guide is available on the documentation disc.
Keep your original packaging. It is designed for this display and is the ideal protection during
transport and storage.
The user guides are also available on www.barco.com/support
Welcome!

R5913216 /03 MDPC-812710
1.4 Product overview
Overview
7
4 3 5 6 7 83
1 2
4 9 10 11 12 13
Image 1–1
1. Ambient light sensor and power status LED
- Power status LED off: Display not powered (mains cable unplugged or power switch in OFF position),
or display is in normal operation
- Power status LED fast blinking amber: Display is entering DPMS1mode
- Power status LED slow blinking amber: Display is in DPMS mode
- Power status LED steady amber: Display manually switched off via the jog dial, or display in hibernate
mode (requires DPMS and Hibernate to be enabled in the OSD menu)
2. Front calibration sensor
3. Jog dial
-Push: Open shortcut menu, go into (sub)menus, confirm adjustments and selections
-Turn left/right: Scroll through (sub)menus, change values, make selections
-Push and hold: Cancel adjustments, exit (sub)menus
4. USB-A 2.0 downstream connector
5. Connector cover
6. VESA mount cover
7. Cable routing ducts
8. Stand locking mechanism
9. USB-B 2.0 upstream connector
10.DisplayPort IN 2 connector
11. DisplayPort IN 1 connector
12.Kensington security slot
13.100–240 VAC mains power input and power switch
Welcome!
1. Display Power Management System

11R5913216 /03 MDPC-8127
Barco Touchpad
The Barco Touchpad can control Barco’sIntuitive Workflow Tools and allows you to control digital pathology,
enterprise imaging and other viewing applications with configurable multi-touch gestures and touchpad
function activation buttons.
Using the Barco Touchpad requires Barco’s MXRT display controller and driver to be installed on your
workstation. For more information about the setup, use and configuration of the Barco Touchpad, please
check the Barco “Display Controller and Intuitive Workflow Tools”user guide on the included documentation
CD, or at www.barco.com/support.
Welcome!

R5913216 /03 MDPC-812712
Welcome!

13R5913216 /03 MDPC-8127
2.1 Display controller installation .........................................................................................................14
2.2 Display position adjustment...........................................................................................................14
2.3 Cable connections ........................................................................................................................15
2.4 MXRT driver and Intuitive Workflow Tools installation ......................................................................16
2.5 QAWeb Enterprise registration ......................................................................................................16
2.6 VESA-mount installation ...............................................................................................................17
2.7 VESA-mount installation in portrait mode........................................................................................19
Installation and
setup 2

R5913216 /03 MDPC-812714
2.1 Display controller installation
About
Before you install your display and connect it with the workstation, make sure to have a suitable2display
controller installed in the workstation.
The MDPC-8127 display operates at its full specifications when driven by a Barco MXRT display
controller and MXRT driver (which also includes the Barco Intuitive Workflow Tools). If you
ordered a MXRT display controller, it is included in the box of your display.
For more information and installation instructions, please check the Barco “Display Controller and
Intuitive Workflow Tools”user guide on the included documentation CD, or at
www.barco.com/support.
2.2 Display position adjustment
To adjust the display position
After unpacking, you can safely tilt and swivel the display to your preferred position.
Image 2–1
To adjust the height of the display, first move the slider at the back of the stand to the unlock position. Then
you can raise or lower the display as desired.
Installation and setup
2. For a list of compatible display controllers, please refer to the compatibility matrix available on my.barco.com (MyBarco > My Support
> Healthcare > Compatibility Matrices > Barco Systems Compatibility Matrices)

15R5913216 /03 MDPC-8127
Image 2–2 Image 2–3
WARNING: The height can be locked only when the display is in the lowest position, even though
the slider at the back of the stand can be moved to the lock position at any height of the display.
2.3 Cable connections
To connect the cables
1. Remove the connector cover. Do this by gently pulling the bottom of the connector cover away from the
display.
Image 2–4
2. Connect the DisplayPort input(s) (DP IN 1 and/or DP IN 2) with the DisplayPort output(s) on the
workstation.
Note: To obtain full resolution and full refresh rate, two DisplayPort video input cables must be connected
to the display. If only one DisplayPort video input cable is connected the display will run at half of the
specified refresh rate.
Note: When two DisplayPort video inputs are connected you can easily switch between them in the OSD
menu. See “Image source selection”, page 34 for more info.
Installation and setup

R5913216 /03 MDPC-812716
3. Connect the USB upstream connector with the USB host of your workstation to make use of QAWeb
Enterprise and to use the Barco Touchpad optimally.
4. Connect the Barco Touchpad with one of the USB downstream connectors. Other peripherals like a
keyboard, mouse, etc. can also be connected.
5. Connect the supplied mains cable to the power input of the display.
Image 2–5
6. Route all cables through the cable clips in the connector compartment.
7. Re-install the connector cover: slide the top of the cover in the available recesses, then push the bottom of
the cover back into position.
8. Route some or all cables through the routing channels in the stand of your display.
9. Connect the supplied mains cable to a grounded power outlet.
2.4 MXRT driver and Intuitive Workflow Tools
installation
About
When you are using a Barco MXRT display controller, you can start up your MDPC-8127 display system and
install the MXRT driver and Intuitive Workflow Tools . Barco’s Intuitive Workflow Tools are designed to
increase visibility of subtle details, improve focus during reading sessions, and accelerate workflow.
To install the MXRT driver and Intuitive Workflow Tools
1. Switch on your MDPC-8127 as described in “Standby switching”, page 22.
2. Turn on the workstation connected to your display.
Your display will be running in a basic video mode at a default refresh rate when first time starting up.
3. Download the latest MXRT driver and Intuitive Workflow Tools from www.barco.com/mxrt.
4. Install the MXRT driver and Barco’sIntuitive Workflow Tools as described in the Barco “Display
Controller and Intuitive Workflow Tools”user guide on the included documentation CD, or at
www.barco.com/support.
5. When the drivers are completely installed, your display will automatically detect the connected video input
signal(s) and apply the correct video mode and refresh rate.
2.5 QAWeb Enterprise registration
About
QAWeb Enterprise helps you manage quality and assure compliance of your expanding healthcare
enterprise with less effort, lower cost, and complete confidence. This fully automated and secure system
guarantees a consistent image quality and uptime for all registered imaging display systems within your facility
and across your enterprise. Learn more at www.barco.com/qaweb.
Installation and setup

17R5913216 /03 MDPC-8127
To register your display system to your QAWeb Enterprise organization, the QAWeb Enterprise Agent must be
installed and running on your workstation and it must be able to communicate with the QAWeb Enterprise
cloud service.
For more information and installation instructions, please check the QAWeb Enterprise user guide on
www.barco.com/support.
2.6 VESA-mount installation
CAUTION: Use suitable mounting apparatus to avoid risk of injury.
WARNING: Never move a display attached to an arm by pulling or pushing the display itself.
Instead, make sure that the arm is equipped with a VESA compliant handle and use this to move
the display.
Please refer to the instruction manual of the arm for more information and instructions.
WARNING: Use a mount that is compliant with the VESA 100 mm standard.
Use a mount that can support the weight of the display. Refer to the technical specifications of this
display for the applicable weight.
Overview
The panel, standard attached to a stand, is compatible with the VESA 100 mm standard. Thus, it can be used
with an arm that is approved by VESA. This chapter shows you how to release the panel from the stand and
how to attach it to an arm. If you’re not using an arm, you can skip this chapter.
1. Unlock the stand locking mechanism and put the display in the highest position.
Image 2–6
2. Put the display face down on a clean and soft horizontal surface. Be careful not to damage the panel
screen.
3. Push the VESA mount cover to the right and lift the cover on the right with your finger or a flathead
screwdriver.
Installation and setup

R5913216 /03 MDPC-812718
Image 2–7
4. Push the VESA mount cover to the left and release the cover on the left with a flathead screwdriver.
Image 2–8
5. Rotate the VESA mount cover to uncover the screws fixing the panel to the stand.
Image 2–9
6. Unscrew the 4 fixation screws while supporting the stand.
Image 2–10
7. Attach the panel firmly to the arm using 4 M4 screws.
Respect the following rule to select an appropriate screw length:
- Lmin = T + W + 6.5 mm
Installation and setup

19R5913216 /03 MDPC-8127
- Lmax = T + W + 10 mm
T
W
Lmin
Lmax
Image 2–11
2.7 VESA-mount installation in portrait mode
Introduction
By default, your MDPC-8127 display is mounted in landscape position but it can also be used in portrait
position. This section explains how to install and use the display in portrait orientation. Carefully follow the
instructions hereafter to ensure proper product operation and to avoid physical damage to the product.
Instructions
1. Physically mount the display in portrait position. Both clockwise and counterclockwise orientation are
supported.
You can choose to either mount the display on the existing stand, or on a compatible VESA mount.
Follow the instructions as described in “VESA-mount installation”, page 17 to install the display on a VESA
mount . These instructions can also be used to mount the display in portrait position on the existing display
stand.
2. Connect the display to your workstation.
When using the display in portrait position only one DisplayPort cable can be connected. This will give you
the full resolution and refresh rate but with just one Windows taskbar at the bottom of the screen.
3. For your convenience, align the display's OSD menu orientation with the physical position of your display.
For instructions, see “OSD menu orientation”, page 26.
4. In the EDID timings menu of the OSD, change the resolution to 8MP. For instructions, see “EDID timings”,
page 35.
5. Rotate the Windows desktop in portrait mode.
From Windows 7 onwards, an “Orientation”option is available in the display settings. For Windows 10, you
can find instructions here:
https://support.microsoft.com/en-us/help/4027186/windows-10-change-screen-orientation
Installation and setup

R5913216 /03 MDPC-812720
Installation and setup