Barska AX12218 User manual

User’s Manual for Fireproof Safe
WARNING
Read all instructions before using this safe.
A
F
B
- For security purposes, change the factory default
code as soon as possible. Factory default code
is 159#.
-Test registered pin code a few times before closing
the safe door.
- Avoid leaving door open and unattended; it will allow
unauthorized individuals to reprogram the safe,
gaining full access to the safe and its contents.
- Do NOT storage combustible materials in this unit.
- The interior will reach up to 350°F. Avoid storing items
such as pearls, digital media, back up tapes, data
cartridge, CD’s etc. These items sustain heat damage
at temperatures much lower than 350°F.
- The safe has a proprietary insulation that has a high
moisture content. To avoid humidity damage to
contents we recommend placing a desiccant or
dehumidifier inside the safe to protect the contents
from rust or mildew.
- If you are storing delicate items such as jewelry,
photos, etc. we recommend putting them in an
air-tight container, prior to placing them in the safe
for storage.
- In the event of a fire, we recommend caution when
opening the safe. If you feel unsure about opening the
safe because of the contents stored, contact your
local fire department for assistance.
- Store emergency keys in a secure place; NOT inside
of the safe.
- Keep children away from safe; they should not play
with or around the safe at anytime. Children at play
could accidentally get locked inside the safe or
accidentally pull on the safe door causing safe to tip
over if not properly mounted.
- Failure to follow these warnings could result in serious
injury or death.
NOTE: BARSKA is not responsible for any damage or
lost contents in the safe due to moisture.
NOTE: BARSKA is not responsible if the safe is stolen
or contents in the safe.
E
D
G
C
L
o
c
k
U
n
l
o
c
k
BATTERY INSTALLATION
1. Remove Batter Compartment (F) cover
2. Insert 4AA batteries and restore batter cover
FACTORY DEFAULT MODE \ CREATING A
PERSONAL PIN CODE
Safe retains one 3-8 digit pin code.
1. On the Keypad (E) enter in factory default code “159#”.
2. Turn the Handle (C) clockwise to unlock and open the safe
door. You have 5 seconds before the locking mechanism
is reactivated.
3. Locate the Initialization Button (A) on the inside of the
safe door.
4. Press and release the Initialization Button (A), you will hear
one beep. The yellow Indicator Light (D) on the Keypad (E)
will be on, you can only enter your code while the yellow
Indicator Light (D) is on.
5. Enter your 3‐8 digit personal pin code and press “*” to
confirm the new code.
TESTING PERSONAL PIN CODE
1. With the safe door open and the Bolts (B) extended in the
locked position, enter in your personal pin code on the
Keypad (E) and press the “#” symbol.
2. Turn the Handle (C).
If pin code was registered correctly the Bolts (B) will retract.
If pin code was NOT registered correctly the Bolts (B) will stay
in the locked position.
If pin code was NOT registered correctly repeat steps in
“FACTORY DEFAULT MODE \ CREATING A PERSONAL PIN
CODE”.
3. Test a pin code that is not registered to ensure the Bolts (B)
will stay in the locked position.
OPENING & CLOSING SAFE WITH PERSONAL PIN
CODE
OPEN:
1. Enter in your personal pin code on the Keypad (E) and press
the “#” symbol.
2. Turn the Handle (C) clockwise to the unlock and pull the
safe door open.
CLOSE:
To close safe, close door and turn Handle (C) counter
clockwise to the lock position.
LOCK OUT MODE
Lock out mode is activated when the wrong pin code is entered
- 3 consecutive times, lock out mode will last 20 seconds
- 6 consecutive times, lock out mode will last 5 minutes
CHANGING PERSONAL PIN CODE
Follow steps 3, 4 and 5 in “ FACTORY DEFAULT MODE \
CREATING A PERSONAL PIN CODE”
BEEP SOUND OPTIONS
Beep OFF: On the Keypad (E) enter in *633
Beep ON: On the Keypad (E) enter in *66
See reverse side for more information
* Actual model may vary
A. Initialization Button
B. Bolts
C. Handle
D. Indicator Lights
E. Keypad
F. Battery Compartment
G. Emergency Key Access

BARSKA warrants this new safe to be free of original defects in
material and/or workmanship under normal use for a period of
twelve (12) months from the date product is received by
purchaser. This warranty does not include damage caused by
improper installation or maintenance. Damage from misuse,
abuse, accident (such as dropping), excessive fire, flood, or acts
of nature. Damage from service or repairs other than those
performed by BARSKA. Labor, cost and shipping charges for the
removal and replacement of defective parts beyond the initial
twelve-month warranty period. All transportation and shipping
charges. Removing or altering the seal under any circumstances
will automatically void the warranty.
This warranty is limited to original purchaser and is not
transferable. This warranty applies only to products purchased in
the United States.
Please email [email protected] or call 1.888.666.6769 for Return
Merchandise Number (RMA#) before any returns. The RMA
number must appear on the outside of the shipping package.
Product must be packed carefully and sturdily in its original
packaging to prevent damage in transit and returned freight
pre-paid to:
BARSKA OPTICS
Repair Department
855 Towne Center Drive
Pomona, CA 91767
Please include all of the following when returning BARSKA
products for service and/or replacement:
1. Please write your complete details (Name, Address,
Telephone #, E-mail address, RMA#, etc.)
2. Purchase receipt or Proof of Purchase. (Original/Copy)
3. A brief explanation of the defect.
*Please allow 6-8 weeks for delivery.
BARSKA will examine and test returned product and repair or
replace defective part(s) or units with new part(s) or a new unit if
necessary within the warranty period.
If repair is required after warranty period expiration, purchaser
will be charged for replacement parts and return shipping.
BARSKA® shall not be liable for any consequential, incidental
and/or contingent damages whatsoever. We will not pay
shipping, insurance or transportation charges from you to us, or
any import fees, duties and or taxes.This warranty supersedes all
previous BARSKA warranties.
11/19
BC620
11/19
BC371
© 2019 BARSKA®
855 Towne Center Drive | Pomona, CA 91767
(t) 888.666.6769 | (f) 909.445.8169 | www.barska.com
OPENING THE SAFE WITH THE EMERGENCY ACCESS
KEY
1. Turn Keypad Cover (E) counter clockwise to reveal the
Emergency Key Access (G). Hold the Keypad Cover (E) with
one hand.
2. Insert access key into Emergency Key Access (G) and turn
clockwise to open.
NOTE: Store keys in a secure place. NOT inside of the safe.
SAFE ALARM
Press "*00" to activate the Alarm-U System. If anyone tries to
temper with safe, the safe alarm will sound for 20 seconds. To turn
off the alarm from sounding, please enter the correct pin cod or
use the emergency key to open the safe and remove the batteries.
LOW BATTERY WARNING
When a button is pressed on the Keypad (E), a red Indicator Light
(D) will come on momentarily warning that the battery is low. To
replace the battery, see steps in “BATTERY INSTALLATION”.
NOTE
After replacing the batteries safe retains the last pin code saved.
FLOOR MOUNTING INSTRUCTIONS
The safe may be mounted to the floor. Be aware of the load
bearing. Failure to do so can result in personal injury and/or
damage to property. Use appropriate tools when performing work
and always use eye protection.
- Barska recommends that this safe be anchored to the floor.
- Your safe must be shimmed level to assure proper lock functions
and to keep the door from swinging open too quickly or closing
by itself.
- To avoid rust on the safe, never set the safe directly on a cement
floor. We recommend a spacer be placed between the safe and
the cement.
- Exposure to chemicals or other adverse environments may cause
the warranty to become invalid.
- The safe is designed to support itself when the doors is opened.
However caution should be used to avoid pulling it over. To
maximize security and stability, bolting the safe to the floor is
recommended.
- This safe come with a pre-drilled electrical hole, measuring 3/8"
diameter, located on the bottom right-hand side of the safe (if you
are facing the safe, it is on your right-hand side).
- Use proper drill tools depending on the type of floor you are
mounting the safe (wood, tile, or concrete).
- Measure the location of the pre-set drill holes; mark their
exact position onto the floor.
- Drill the appropriate size holes for the anchors you are using.
- Carefully press the anchor into the holes at this time.
- Mount the safe by running screws from inside of the safe and
securing to anchors; ensure the safe is mounted securely.
CARE AND MAINTENANCE
- Your safe is built to last a lifetime. However, please
understand that the locking mechanism has some precisions
parts. If you experience ANY difficult opening or closing your
safe, DO NOT FORCE THE HANDLE, call 888.666.6769 for
technical support. If the handle is forced or ABUSED, it may
jam the components in the lock, which will require a safe
technician to unlock your safe. This causes an inconvenience
for both the owner and Barska and may lead to a
claim denials.
- Keep liquids away from the keypad. Spills on the keypad will
cause damage and possibly electric shock.
- If necessary use a damp cloth to clean the safe. DO NOT use
chemicals or cleaning agents.
- Keep liquids away from the control panel. Spills on the control
panel will cause damage and possibly electric shock.
- Secure safe in a proper area to prevent it from falling and
causing damage or injury.
- The mechanism inside the door and the hinges are
permanently lubricated, this needing no maintenance.
Occasionally it may be necessary to lubricate the door bolts.
To do so, extend the door bolts completely with the door
open. Wipe a small amount of oil around each bolt.
- DO NOT over stuff the contents of the safe, it can damage
the motor mechanism or the contents.
- DO NOT disassemble the product. For all repairs and
maintenance, contact BARSKA Customer Service
888.666.6769 for technical support.
1 YEAR LIMITED WARRANTY
FIRE SAFE VAULTS
©2019 BARSKA®