Bartscher BF 30E OU User manual

101530 / BF 16E
101560 / BF 30E
101535 / BF 30E OU
Original
-
Gebrauchsanleitung
V2-1/0716

- 25 -
ENGLISH
Table of contents
1.Safety ........................................................................................................................ 26
1 1 Safety instructions 26
1 2 Key to symbols 29
1 3 Proper use 30
2. General information ................................................................................................ 31
2 1 Liability and Warrantees 31
2 2 Copyright protection 31
2 3 Declaration of conformity 31
3. Transport, packaging and storage......................................................................... 32
3 1 Delivery check 32
3 2 Packaging 32
3 3 Storage 32
4. Technical data ......................................................................................................... 33
4 1 Overview of parts 33
4 2 Technical specification 37
5. Installation and operation ....................................................................................... 39
5 1 Installation 39
5 2 Operation 41
6. Cleaning ................................................................................................................... 46
7. Possible Malfunctions ............................................................................................ 47
8. Waste disposal ........................................................................................................ 48
Bartscher GmbH phone: [phone]
Franz-Kleine-Str 28 fax: [phone]
33154 Salzkotten Service-Hotline: [phone]
Germany www bartscher com
GB/UK

- 26 -
Read this instruction manual before using and
keep them available at all times!
This instruction manual contains information about the installation, operation and
maintenance of the device and should be consulted as an important source of
information and reference guide
Awareness of the safety instructions and instructions for use in this manual will ensure
the safe and correct use of the device
In addition to the information given here, you should comply with any local Health and
safety Controls and generally applicable safety regulations
The instruction manual forms part of the product and should be kept near the device
and easily accessible for anyone carrying out the installation, servicing, maintenance or
cleaning
Please keep these instructions and give them to future owners of the device
1.Safety
This device is designed in accordance with the presently applicable technological
standards However, the device can pose a danger if handled improperly and
inappropriately
All persons using the device must follow the recommendations and instructions
in this instruction manual
1.1 Safety instructions
 The device is not intended for use by individuals (including children)
with physical or mental disabilities, insufficient experience, and/or
insufficient knowledge unless such persons are under the care of a
person responsible for their safety or have received instructions
regarding appropriate use of the device
 Children should be observed to ensure that they are not playing with
the device
 Do not leave the device unattended during operation since there
might occur malfunctions which could result in overheating of the oil
In case of high temperatures oil might ignite
 Never leave the device unattended when in use
 Only use the device indoors
 The device is not adapted for use with an external timer or remote
control

- 27 -

This device may only be operated in technically proper and safe
condition
 Prevent access of children to the package materials like plastic
bags and foamed polystyrene elements Suffocation hazard!
 Only a qualified technician and using original spare parts and
accessories should carry out repairs and maintenance of the device
Do not attempt to repair the device yourself.
 Do not use any accessory or spare parts that have not been
recommended by the manufacturer These can be dangerous for the
user or lead to damages of the device or personal injury, and further,
the warranty expires
 To prevent hazards and to ensure optimum efficiency, no modifications
or alterations to the device that are not explicitly approved by the
manufacturer may be undertaken
DANGER! Electric shock hazard!
To avoid the hazard results please follow the safety instructions below
 Never allow the power cable to come into contact with heat sources or
sharp edges The power cable should not hang over the side of the
working surface Ensure that no one can step on or trip over the cable
 The power cable must not be folded, bent or tangled, and must always
remain fully unrolled Never place the device or other objects on the
power cable
 Do not lay the cable over carpets or heat insulations Do not cover
the cable Keep away the cable from operating range and do not
dunk it into water
 Inspect the power cable regularly for damage Never use the device
if the cable is damaged If the power cable is damaged, have an
authorised service center or qualified electrician replace it

- 28 -

The supply cable must be disconnected from the socket only by
pulling the plug
 Never carry or lift the device by the supply cable Always use the
device handles
 In any case do not open the device housing In case of electrical or
mechanical modifications the electric shock hazard will occur
 Never immerse the appliance and the power cord in water or other
liquids
 Do not use any acid agents and make sure no water ingresses the
device
 Never operate the device with moist hands or standing on wet floor
 Disconnect the device from the power supply:
- when the device is not used,
- in case of anomalies during operation,
- before cleaning
HOT SURFACE! Burn hazard!
To avoid the effects of this risk, follow the safety instructions presented
below
 During the operation the surface of the device is very hot!
To avoid burns to the hands and fingers, do not touch the hot
surface of the device! Operate the device only using the designated
handles and switches
 Also after switching off, the frying oil/fat remaining in the basin
remains hot for some time Before cleaning or moving it to another
place oil must cool down first Hot oil/fat splashes or explosions may
cause burns at hands, arms and face!
 Do not use moisten frying goods Always remove the extra ice
from deep frozen products first Do not leave any frozen products
in the basket hanging over the chamber filled in with the hot oil/fat
Even the smallest water drops may cause oil splashes or lead to
explosions during frying

- 29 -
WARNING! Fire or explosion hazard!
Follow the safety instructions listed in order to avoid the hazard:
 Never operate the device near combustible, easily flammable
materials (e g petrol, spirit, alcohol etc ) They evaporate through
heating and in case of contact with ignition sources deflagrations
can occur which can lead to serious personal injuries and property
damages
 Do not use the device near the inflammable objects or under them
(e g curtains, wall mounted cabinets etc )
 When a fire arises unplug the power cord from the socket before you
initiate appropriate measures for fire-fighting Provide sufficient supply
of fresh air Caution: Never extinguish the fire with water when the
power plug is connected to the socket Electric shock hazard!
1.2 Key to symbols
In this manual, symbols are used to highlight important safety instructions and any
advice relating to the device The instructions should be followed very carefully to avoid
any risk of accident, personal injury or material damage
WARNING!
This symbol highlights hazards hich could lead to injury.
WARNING!
This symbol highlights dangerous situations hich could lead to injury or death.
HOT SURFACE!
This symbol is a arning that the device surface is hot hen in use.
Ignoring this arning may result in burns!

- 30 -
CAUTION!
This symbol highlights dangerous situations hich could lead to light
injuries, or damage, malfunction, and/or destruction of the device.
NOTE!
This symbol highlights recommendations and information aimed for effective
and trouble-free device operation.
1.3 Proper use
The operational safety of the device is assured only in case of proper use, according
to the operation manual
All technical activities like installation and maintenance must be performed by the
qualified service personnel only
Pastries deep fat fryer is designed for frying of appropriate food products only
You may not use the pastries deep fat fryer for:
- heating of food and liquids
CAUTION!
Any use going beyond the intended purpose and/or any different use of the
device is forbidden and is not considered as conventional.
Any claims against the manufacturer or his authorized representative as a
consequence of experiencing damages resulting from unconventional use
are impossible.
The operator is liable for all damages resulting from inappropriate use.

- 31 -
2. General information
2.1 Liability and Warrantees
All the information and instructions in this manual take into account standard safety
regulations, current levels of technical engineering as well as the expertise and
experience we have developed over the years
The instruction manual was translated with all due care and attention However, we do
not accept liability for any translation errors The German version of this instruction
manual is definitive
If the delivery consists of a special model, the actual scope of delivery may differ from
the descriptions and illustrations in this manual This is also the case for special orders
or when the device has been modified in line with new technology
CAUTION!
Read this manual carefully and thoroughly before any operation
of the device, and especially before turning it on!
Manufacturer is not liable for any damages or faults caused by:
- violation of advice concerning operation and cleaning;
- use other than designed;
- alterations made by user;
- use of inadequate spare parts
We reserve the right to make technical changes for purposes of developing and improving
the useful properties
2.2 Copyright protection
The instruction manual including any texts, drawings, images or other illustrations is
copyright No part of this publication may be reproduced, transmitted or used in any
form or by any means without permission in writing from the manufacturer Any person
who commits any unauthorized act in relation to this publication shall be liable to claims
for damages All rights reserved
NOTE!
The contents, texts, dra ings, pictures and any other illustrations are
copyright and subject to other protection rights. Any person unla fully
using this publication is liable to criminal prosecution.
2.3 Declaration of conformity
The device complies with the current standards and directives of the EU
We certify this in the EC declaration of conformity If required we will be
glad to send you the according declaration of conformity

- 32 -
3. Transport, packaging and storage
3.1 Delivery check
Please check the delivery upon completeness and transport damage immediately
after receipt In case of visible damage do not accept or accept the delivery with
reservation only
Note the extent of damage on the carrier’s bill of delivery Trigger off the complaint
Hidden damages should be reclaimed immediately after notice, as claims for damages
can only be asserted within the effective period for complaints
3.2 Packaging
Please do not throw away the covering carton of your device as it might be useful for
storage purposes, when moving or, in case of damages, when the device must be sent
back to a repair center The outer and inner packing material should be removed
completely from the device before installation
NOTE!
If you liked to dispose the packing, consider the regulations applicable in
your country. Supply re-usable packing materials to the recycling.
Please inspect the device upon completeness In case any part is missing please
contact our customer service center immediately
3.3 Storage
Keep the package closed until installation and under consideration of the outside
indicated positioning- and storage markings
Packages should be stored under consideration of the following:
- Do not store outdoors
- Keep it dry and dust-free
- Do not expose it to aggressive media
- Do not expose it to direct sunlight
- Avoid mechanical shocks and vibration
- In case of longer storage (> 3 months) make sure you check
the state of the packaging and the parts regularly
If required refresh or renew

- 33 -
4. Technical data
4.1 Overvie of parts
101530
1
Control panel 9 Blockade
2
Control box handle 10 Base unit with the oil basin
3
Frying basket support 11 Stainless steel cover with handle
4
Control box 12 Frying basket handle
5
Base unit handle (2) 13 Frying basket hooks
6
Feet (4) 14 Frying basket
7
Lever of the oil drain mechanism 15 Oil drain pipe
8
Nozzle
2
4
10
9 7
8
2
1
14
13
11
12
12
15
3
6
5

- 34 -
101560
1
Control panel 9 Blockade
2
Control box handle 10 Base unit with the oil basin
3
Frying basket support 11 Stainless steel cover with handle
4
Control box 12 Frying basket handles
5
Base unit handle (2) 13 Frying basket hooks
6
Feet (4) 14 Frying basket
7
Lever of the oil drain mechanism 15 Oil drain pipe
8
Nozzle
5
6
4
10
9
7
8
11
1
3
2
2
14
13 12
12
15

- 35 -
101535
1
Control panel 8 Base unit with oil basin
2
Control box handle 9 Open base frame
3
Frying basket support 10 Height-adjustable feet (4)
4
Control box 11 Sieve with handle 2/3 GN
5
Frying basket handle 12
Oil collecting container
with handle 1/1 GN (2)
6
Frying basket 13 Oil drain lever
7
Frying basket hooks 14 Stainless steel cover with handle
4
2
3
1
2
8
5
6
12
5
14
9
13
7
11
10

- 36 -
Additional equipment (not included in the delivery!)
Substitute basket
for deep fat fryer 101530, 16L
Basket size: W 475 x D 245 x H 80 mm
Weight: 1 3 kg
Code-No. 101533
Substitute basket
for deep fat fryer 101560, 30L
Basket size: W 570 x D 440 x H 80 mm
Weight: 1 9 kg
Code-No. 101563
Substitute basket
for deep fat fryer 101535, 30L
Basket size: W 570 x D 440 x H 80 mm
Weight: 1 9 kg
Code-No. 101418
Basket shelf, suspension left
for deep fat fryer 101560, 30 L
Dimensions: W 645 x D 465 mm
Weight: 3 95 kg
Code-No. 101565
Basket shelf, suspension right
for deep fat fryer 101535, 30L
Dimensions: W 645 x D 465 mm
Weight: 3 95 kg
Code-No. 101608

- 37 -
4.2 Technical specification
Name Pastries deep fat fryer BF 16E
Code-No :
101530
Material: stainless steel:
Design:
 oil basin with a large cooling zone
 safety thermostat (overheating protection)
 oil drain mechanism with a blockade
Number of oil basins: 1, basin size: W 515 x D 305 x H 130 mm
Oil basin capacity: 16 litres
Number of frying baskets: 1, basket size: W 475 x D 245 x H 80 mm
Oil temperature
operating range:
50 °C - 190 °C
Power: 9 kW / 400 V 50 Hz 3 NAC
Dimensions: W 560 x D 470 x H 400 mm
Weight: 14 7 kg
Accessories: 1 stainless steel cover, oil drain pipe
Name Pastries deep fat fryer BF 30E
Code-No :
101560
Material: stainless steel
Design:
 oil basin with a large cooling zone
 safety thermostat (overheating protection)
 oil drain mechanism with a blockade
Number of oil basins: 1, basin size: W 615 x D 490 x H 130 mm
Oil basin capacity: 30 litres
Number of fryer baskets: 1, basket size: W 570 x D 440 x H 80 mm
Oil temperature operating
range:
50 °C - 190 °C
Power: 15 kW / 400 V 50 Hz 3 NAC
Dimensions: W 660 x D 650 x H 410 mm
Weight: 23 4 kg
Accessories: 1 stainless steel cover, oil drain pipe

- 38 -
Name
Pastries deep fat fryer BF 30E OU
ith open base frame
Code-No :
101535
Material: stainless steel
Design:
 oil basin with a large cooling zone
 safety thermostat (overheating protection)
 oil drain mechanism with a blockade
Number of oil basins: 1, basin size W 615 x D 490 x H 130 mm
Oil basin capacity: 30 litres
Number of fryer baskets: 1, basket size: W 570 x D 440 x H 80 mm
Oil temperature operating
range:
50 °C - 190 °C
Power: 15 kW / 400 V 50 Hz 3 NAC
Dimensions: W 660 x D 650 x H 980-1040 mm
Weight: 40 0 kg
Accessories:
2 oil collecting containers with handle 1/1 GN,
150 mm deep
1 sieve with handle 2/3 GN,
1 stainless steel cover
Subject to technical changes and alterations!

- 39 -
5. Installation and operation
5.1 Installation
CAUTION!
Any installation, connection and maintenance ork related to the device
may be performed by the qualified and authorised technician only,
according to the valid international, national and local regulations.
Positioning
 Unpack the device and remove all packing material
 Place the device on top of an even, stable, dry and water-resistant surface which
supports the weight of the device and is not heat sensitive
 Never place the device on the flammable surfaces
 You must not position the device near open fireplaces, electric ovens/arc furnaces,
furnaces/electric heaters or other heat sources
 Never place the device at the edge of a table to avoid accidents
 Never place the device in humid or wet environment
 When locating the device make sure there is a 10 cm gap from any walls or other
objects
 Place the device so that the plug is easily accessible for quick disconnection of the
device from power supply, if necessary
 Before the first use, remove the protective foil from the device Remove the foil slowly
not to leave glue residues Remove possible glue residues with appropriate solvent
CAUTION!
Never remove the type plate and arning signs from the device.

- 40 -
Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local po er grid
specification should be compared ith that of the device (see
rating plate). Connect the device only in case of compliance!
 Before connecting the power supply to the device, the local power grid specification
should be compared with the value of voltage and frequency on the type plate
Permissible voltage tolerance is ± 10%.
 Make sure that there is a power connection with protective conductor available which
is consistent with the applicable regulations During the connection to the electrical
installation, use the cable with sufficient cross-section
 A multipolar switch must be switched on between the device and the electrical
installation, appropriate for the device’s power The switch with at least 3 mm
opening must be easily accessible
 Connection to the power supply installation must comply with the applicable
international, national and local regulations

- 41 -
5.2 Operation
CAUTION!
The deep fat fryer can be serviced only be people ho are familiar ith
operation of the device and the risks occurring during frying.
Preparation of the device
 Using the handles, remove the cover and take the frying basket out of the device
 Detach the control box from the device by lifting it carefully (until you hear „click“
sound)
 Before the first use, thoroughly clean the device and its accessories according
to the instructions in section 6 „Cleaning“ Make sure that no water gets into
the electrical installation or control box Next, dry the device and accessories
thoroughly!
 Carefully place the control box on the rear edge of the base unit Pivot at the
bottom of the control box must be placed in the opening of the oil basin for the
device to be set correctly
Note: For safety reasons, the device operates only when the control box is properly
secured to the body, thanks to which the micro switch indicates that the device is
ready to operation
Control elements
Control box with
heating element
Heating indicator
Power indicator
(green)
ON/OFF switch Temperature controller

- 42 -
Starting the device
WARNING!
Before operation of the device make sure the device is s itched off
(Temperature controller is in „0“ position).
 There may be no water at the bottom of the basin before filling it with the frying oil
The basin must be clean and dry
The frying oil drain mechanism for deep
fat fryers 101530 and 101560 must be
closed and blocked (press the blockade
up and move the lever to the right)
 The oil drain tap for deep fat fryer
101535 must be closed (lever turned
left or right)
Tips regarding the use of oil or fat in blocks
 Use appropriate oil for frying (e g vegetable, sunflower, groundnut oil etc )
or fat in blocks
Note: Melt the fat in blocks in a separate pan before pouring
it to the oil basin!
 Use only oil or fats suitable for high temperature cooking
 Do not mix different types of oil or fat, because they may have different boiling
points
WARNING! Risk of burns!
Do not reuse oil, as its lo er combustion point means that it may catch fire,
it also is more susceptible to foaming. Moreover there is a risk of increased
smoke release and odour.
Lever
Blockade
Lever

- 43 -
 Carefully pour oil to the oil basin until the appropriate level is reached (between
“MIN“ and “MAX“ marks in the oil basin) Marks are located on the side wall of
the oil basin
CAUTION!
Never start the device ithout frying oil in the basin.
Al ays make sure that the oil or fat level is bet een “MIN“- and “MAX” marks
in the basin.
WARNING!
RISK OF FIRE!
Reducing the oil level belo the MIN mark creates an oil ignition hazard.
RISK OF BURNS!
If the oil or fat level is above the MAX mark, it may lead to boiling out of
the hot oil
Frying of pastries
 Start the device with use of ON/OFF switch The green power indicator will come on
 Set the temperature controller to required value (50 °C - 190 °C) turning it clockwise
 While heating up the red control light comes on, going off when the set temperature
has been reached When the oil temperature drops the red light comes on again and
the device heats again
WARNING! Burn hazard!
When in use, the device and oil in the chamber are very hot and the oil is at
risk of catching fire.
Do not allo the device to function for long periods of time!
Immediately after frying set the temperature controller to position “0”.
 For best results, wait until the device has reached the desired temperature and
then place the food product in the oil chamber
CAUTION!
Use the appropriate quantity of products avoiding overfilling of the basket
hich may have a negative impact on the effects of frying or lead to boiling
out of oil.