Bayer HealthCare CHIPCO 26019 N User manual

1
CHIPCO®26019 N/GFungicide
A Fungicide for the Prevention and Control of Certain Diseases of Ornamentals
ACTIVE INGREDIENT:
Iprodione: 3-(3,5-dichlorophenyl)-N-(1-methylethyl)-2,4-dioxo-1-imidazolidinecarboxamide) ..............................50.0%
INERT INGREDIENTS:............................................................................................................................................50.0%
Total………………………………………………………………………………………………………………………... 100.0%
EPA Reg. No. 432-889 EPA Est. No.
KEEP OUT OF REACH OF CHILDREN
CAUTION
For MEDICAL and TRANSPORTATION Emergencies ONLY Call 24 Hours A Day 1-800-334-7577
For PRODUCT USE Information Call 1-800-334-9745
FIRST AID
If on skin or
clothing: •Take off contaminated clothing.
•Rinse skin immediately with plenty of water for 15-20 minutes.
•Call a poison control center or doctor for treatment advice.
If inhaled: •Move person to fresh air.
•If person is not breathing, call 911 or an ambulance, then give artificial respiration, preferably mouth-to-mouth
if possible.
•Call a poison control center or doctor for further treatment advice.
Have the product container or label with you when calling a poison control center or doctor or going for treatment.
PRECAUTIONARY STATEMENTS
CAUTION
HAZARDS TO HUMANS AND DOMESTIC ANIMALS
Harmful if absorbed through skin or inhaled. Avoid contact with eyes, skin or clothing. Avoid breathing dust. Prolonged or frequently
repeated skin contact may cause allergic reaction in some individuals.
PERSONAL PROTECTIVE EQUIPMENT
Some materials that are chemical-resistant to this product are made of any waterproof material. If you want more options, follow the
instructions for category A on any EPA chemical-resistant category selection chart.
Mixers, loaders, others exposed to the concentrate, cleaners/repairers of equipment , and applicators applying as a dip treatment
must wear coveralls over long-sleeve shirt and long pants, chemical-resistant gloves, chemical-resistant footwear plus socks,
chemical-resistant apron, and a dust/mist filtering respirator (MSHA/NIOSH approval number prefix TC-21C), or a NIOSH approved
respirator with any N, R, P or HE filter.
Applicators using handheld equipment must wear coveralls over long-sleeve shirt and long pants, chemical-resistant gloves,
chemical-resistant footwear plus socks, chemical-resistant headgear for overhead exposures, and a dust/mist filtering respirator
(MSHA/NIOSH approval number prefix TC-21C), or a NIOSH approved respirator with any N, R, P or HE filter.
Applicators using mechanical ground equipment (groundboom, airblast, etc.) must wear long-sleeve shirt and long pants, and shoes
plus socks.
Applicators using truck-mounted equipment with a handgun at the end of a hose (i.e., for ornamental applications) and all other
handlers not specified above must wear long-sleeve shirt and long pants, chemical-resistant gloves, and shoes plus socks.
Follow manufacturer's instructions for cleaning/maintaining personal protective equipment (PPE). If no such instructions for washables,
use detergent and hot water. Keep and wash PPE separately from other laundry.
Discard clothing or other materials that have been drenched or heavily contaminated with this product’s concentrate. Do not reuse
them.

2
ENGINEERING CONTROLS
When handlers use closed systems or enclosed cabs in a manner that meets the requirements listed in the Worker Protection Standard
(WPS) for agricultural pesticides [40 CFR 170.240 (d) (4-6)], the handler PPE requirements may be reduced or modified as specified in
the WPS.
User Safety Recommendations
Users should:
•Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet.
•Remove clothing immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing.
•Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As soon as possible, wash
thoroughly and change into clean clothing.
ENVIRONMENTAL HAZARDS
This chemical can contaminate surface water through ground spray applications. Under some conditions, it may also have a high
potential for runoff into surface water after application. These include poorly draining or wet soils with readily visible slopes toward
adjacent surface waters, frequently flooded areas, areas overlaying extremely shallow ground water, areas with in-field canals or
ditches that drain to surface water, areas not separated from adjacent surface waters with vegetated filter strips, and areas overlaying
tile drainage systems that drain to surface water.
This pesticide is toxic to invertebrates. Do not apply directly to water or to areas where surface water is present or to intertidal areas
below the mean high-water mark. Drift and runoff may be hazardous to aquatic organisms in neighboring areas. Do not contaminate
water when disposing of equipment washwater or rinsate.
DIRECTIONS FOR USE
It is a violation of federal law to use this product in a manner inconsistent with its labeling.
Read entire label before using this product.
Do not apply this product in a way that will contact workers or other persons, either directly or indirectly or through drift. Only protected
handlers may be in the area during application. For any requirements specific to your State or Tribe, consult the agency responsible for
pesticide regulation. AGRICULTURAL USE REQUIREMENTS
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR part 170. This Standard
contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of
agricultural pesticides. It contains requirements for training, decontamination, notification, and emergency assistance. It also contains
specific instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE) and restricted-
entry interval. The requirements in this box only apply to uses of this product that are covered by the Worker Protection Standard.
Do not enter or allow worker entry into treated areas during the restricted entry interval of 12 hours for ornamental uses.
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with
anything that has been treated, such as plants, soil, or water is: coveralls, chemical-resistant gloves, and shoes plus socks.
NON-AGRICULTURAL USE REQUIREMENTS
The requirements in this box apply to ornamental and turf uses (golf courses, landscape and institutional areas) of this product that are
NOT within the scope of the Worker Protection Standard (WPS) for agricultural pesticides (40 CFR Part 170). The WPS applies when
this product is used to produce agricultural plants on farms, forests, nurseries or greenhouses.
Do not enter or allow others to enter the treated area until sprays have dried.

3
PESTICIDE STORAGE AND DISPOSAL
STORAGE
Do not contaminate water, food, or feed by storage or disposal.
PESTICIDE DISPOSAL
Wastes resulting from the use of this product may be disposed of on site or at an approved waste disposal facility.
CONTAINER DISPOSAL
Completely empty bag into application equipment. Then dispose of empty outer bag in a sanitary landfill or by incineration, or if allowed
by State and local authorities, by burning. If burned, stay out of smoke.
If this product is packaged in a returnable-refillable container, after use, return the container to the point of purchase or designated
locations. This container must only be refilled with Chipco 26019 N/G fungicide. DO NOT REUSE, THE CONTAINER FOR ANY
OTHER PURPOSE. Prior to refilling, inspect thoroughly for damage such as cracks, punctures, abrasions and damaged or worn out
threads on closure devices. Do not refill or transport damaged or leaking containers. Check for leaks after refilling and before
transportation. For information on cleanup of spills, contact Bayer Environmental Science at 1-800-334-7577. If the container is not
being refilled, return it to the point of purchase.
GENERAL INSTRUCTIONS AND INFORMATION
DIRECTIONS FOR USE THROUGH SPRINKLER IRRIGATION SYSTEMS
Do not use through irrigation systems in California.
Apply this product only through sprinkler irrigation systems including center pivot and solid set. Do not apply this product through any
other type of irrigation system.
SPRAY PREPARATION: Remove scale, pesticide residues, and other foreign matter from the chemical tank and entire injector system.
Flush with clean water.
APPLICATION INSTRUCTIONS: First prepare a suspension of CHIPCO®26019 N/G Fungicide in a mix tank. Fill tank with 1/2 to 3/4
the desired amount of water. Start mechanical or hydraulic agitation. Add the required amount of CHIPCO®26019 N/G Fungicide, and
then the remaining volume of water. (Suspension concentrations using the appropriate dosage per acre recommended on this label of
CHIPCO®26019 N/G Fungicide per 1 to 4 gallons of water are recommended) Then set sprinkler to deliver 0.1 to 0.3 inch of water per
acre. Start sprinkler and uniformly inject the suspension of CHIPCO®26019 N/G Fungicide into the irrigation water line so as to deliver
the desired rate per acre. The suspension of CHIPCO®26019 N/G Fungicide should be injected with a positive displacement pump into
the main line ahead of a right angle turn to insure adequate mixing. If you should have any other questions about calibration, you
should contact State Extension Service specialists, equipment manufacturers or other experts.
NOTE: When treatment with CHIPCO®26019 N/G Fungicide has been completed, further field irrigation over the treated area should
be avoided for 24 to 48 hours to prevent washing the chemical off the crop.
GENERAL PRECAUTIONS FOR APPLICATIONS THROUGH SPRINKLER IRRIGATION SYSTEMS
Maintain continuous agitation in mix tank during mixing and application to assure a uniform suspension.
Greater accuracy in calibration and distribution will be achieved by injecting a larger volume of a more dilute solution per unit time.
The system must contain a functional check valve, vacuum relief valve, and low pressure drain appropriately located on the irrigation
pipeline to prevent water source contamination from backflow. The pesticide injection pipeline must contain a functional, automatic,
quick-closing check valve to prevent the flow of fluid back toward the injection pump. The pesticide injection pipeline must also contain
a functional, normally closed solenoid-operated valve located on the intake side of the injection pump and connected to the system
interlock to prevent fluid from being withdrawn from the supply tank when the irrigation system is either automatically or manually
shutdown. The system must contain functional interlocking controls to automatically shut off the pesticide injection pump when the
water pump motor stops. The irrigation line or water pump must include a functional pressure switch which will stop the water pump
motor when the water pressure decreases to the point where pesticide distribution is adversely affected. Systems must use a metering
pump, such as a positive displacement injection pump (e. g., diaphragm pump) effectively designed and constructed of materials that
are compatible with pesticides and capable of being fitted with a system interlock.
Do not apply when wind speed favors drift, when system connection or fittings leak, when nozzles do not provide uniform distribution or
when lines containing the product must be dismantled and drained.
Crop injury, lack of effectiveness, or illegal pesticide residues in the crop may result from nonuniform distribution of treated water.
Allow sufficient time for pesticide to be flushed through all lines and all nozzles before turning off irrigation water. A person
knowledgeable of the chemigation system and responsible for its operation shall shut the system down and make necessary
adjustments should the need arise.
Do not connect an irrigation system (including greenhouse systems) used for pesticide application to a public water system unless the
label-prescribed safety devices for public water supplies are in place.

4
GENERAL INFORMATION
TANK MIXTURES FOR ADDITIONAL DISEASE CONTROL
No label dosage rates should be exceeded. Do not mix CHIPCO 26019 N/G Fungicide with any product labeled against such mixing.
CHIPCO®26019 N/G Fungicide is compatible with most commonly used fungicides. Follow label directions for the companion product
and apply at the rate recommended for control of the target disease organism.
Do not exceed a total of 17.6 ounces CHIPCO 26019 N/G Fungicide product/1000 ft2per year.
Do not make more than 6 applications per year.
GENERAL PRECAUTIONS AND RESTRICTIONS
Use of this product at residential sites is prohibited. Do not use this product for aerial applications.
If applying this product adjacent to a water body such as a lake, reservoir, river, permanent stream, marsh or natural pond, estuary, or
commercial fish pond, there must be at least a 25-foot vegetative buffer strip between the water body and the point of application.
Do not apply this product when the wind direction is toward aquatic areas.
ORNAMENTALS
NOT FOR RESIDENTIAL USE
FIELD, LANDSCAPE AND GREENHOUSE ORNAMENTALS AND CONIFER NURSERIES*
CHIPCO®26019 N/G Fungicide is a broad spectrum fungicide that may be applied safely to a wide range of ornamental flowering and
foliage plants, either as a foliar spray, drench or dip. Please read specific instructions and use only as directed.
RECOMMENDED FOR USE BY COMMERCIAL NURSERY AND LANDSCAPE PERSONNEL.
CHIPCO®26019 N/G Fungicide is recommended for use on a wide variety of container and field grown flowering and foliage
ornamentals as follows : DISEASES
1. Aerial Web Blight (Rhizoctonia sp.)
2. Alternaria Leaf Blight (Alternaria euphorbiae)
3. Alternaria Leaf Spot (Alternaria panax, Alternaria tenuissima)
4. Botrytis Blight (Botrytis sp.)
5. Fusarium Leaf Spot (Fusarium moniliforme)
6. Helminthosporium Leaf Spot (Helminthosporium sp.)
7. Rhizoctonia stem and root rot (Rhizoctonia sp.)
8. Ink Spot (Drechslera iridis)
9. Tulip Fire (Botrytis tulipae)
10. Alternaria Leaf Blight (Alternaria zinniae)
11. Ray Blight (Ascochyta chrysanthami)
12. Fusarium Corm rot (Fusarium oxysporum)
13. Daffodil Leaf Scorch* (Stagnospora curtissi)
14. Blossom Blight* (Monilinia fructicola)
15. Botrytis Storage Rot* (Botrytis sp.)
16. Cylindrocladium Blight and Wilt* (Cylindrocladium scoparium)
*Not registered for use in California

5
PLANT TOLERANCE: Plant tolerances to CHIPCO®26019 N/G Fungicide have been found to be acceptable in the specific genera
and species listed on this label. It is not possible to evaluate every species or variety of ornamental plant for its tolerance to CHIPCO®
26019 N/G Fungicide. The user should test for possible phytotoxic responses in other plants on a small area basis using recommended
rates prior to commercial use.
ORNAMENTALS
Ageratum (1 to 7)
Ajuga (1 to 7)
Almond (ornamental) (1 to 7)
Alyssum (1 to 7)
Andromeda (1 to 7)
Aphelandra (1 to 7)
Artemisia (1 to 7)
Aster (1 to 7)
Azalea (1 to 7, 16)
Boxwood (1 to 7)
Cactus (1 to 7)
Calendula (1 to 7)
Carnation (1 to 7)
Cherry (ornamental) (1 to 7)
Chrysanthemum (1 to 7, 11)
Cineraria (1 to 7)
Cistena Plum (1 to 7, 14)**
Coleus (1 to 7)
Columbine (1 to 7)
Coral Bells (Heuchera) (1 to 7)
Crape Myrtle (1 to 7)
Crassula (1 to 7)
Croton (1 to 7)
Cyclamen (1 to 7)
Daffodils (1 to 7, 13)**
Dahlia (1 to 7)
Delphinium (1 to 7)
Deutzia (1 to 7)
Dianthus (1 to 7)
Dieffenbachia (1 to 7)
Dizygotheca (1 to 7)
Dogwood (1 to 7)
Dracena (1 to 7)
English Ivy (1 to 7)
Episcia (1 to 7)
Euonymous (1 to 7)
Ficus (1 to 7)
Forsythis (1 to 7)
Gazania (1 to 7)
Geranium (1 to 7)
Gladiolus (1 to 7, 12)
Gloxinia (1 to 7)
Gypsophila (1 to 7)
Hawthorn (1 to 7)
Holly (1 to 7)
Hoya (1 to 7)
Hydrangea (1 to 7)
Impatients* (1 to 7)
Iris (1 to 8)
Juniper (1 to 7)
Kalanchoe (1 to 7)
Lilies (1 to 7)
Lipstick vine (1 to 7
(Aeschynanthus)
Marigold (1 to 7)
Monarda (Bee Balm) (1 to 7)
Pachysandra (1 to 7)
Palm (1 to 7)
Pansy (1 to 7)
Peach (ornamental) (1 to 7)
Peperomina (1 to 7)
Periwinkle (1 to 7)
Philodendron (1 to 7)
Phlox (1 to 7)
Pilea (1 to 7)
Pine (1 to 7)
Pitosporum (1 to 7)
Plum (ornamental) (1 to 7, 14)
Poinsettia (1 to 7)
Poppy (1 to 7)
Pothos* (1 to 6)
Primrose (1 to 7)
Privet (1 to 7)
Protea (1 to 7)
Pyracantha (1 to 7)
Rhododendron (1 to 7, 16)
Rose Tree of China (1 to 7)
Rose (1 to 7, 15)
Salvia (1 to 7)
Schefflera (1 to 7)
Snapdragon (1 to 7)
Statice (1 to 7)
Tree Ivy (1 to7)
Tulip( 1 to 7, 9)
Viburnum (1 to 7)
Violet (1 to 7)
Zinnia (1 to 7, 10)
*NOTE: Do not use CHIPCO®26019 N/G Fungicide as a soil drench on Impatiens or Pothos .
Do not use CHIPCO®26019 N/G Fungicide on Spathiphyllum.
**Not registered for use in California

6
HOW TO USE CHIPCO®26019 N/G FUNGICIDE AS A FOLIAR SPRAY
Apply CHIPCO®26019 N/G Fungicide as a foliar spray to run-off, at the following rates and intervals, when conditions become
favorable for disease development.
DISEASE POUNDS
PRODUCT/100 GALLONS INTERVAL OF APPLICATION USE DIRECTIONS
Aerial Web Blight
(Rhizoctonia sp.)
Alternaria Leaf Blight
(Alternaria zinniae)
Alternaria Leaf Blight
(Alternaria euphorbiae)
Alternaria Leaf Spot
(Alternaria panax)
(Alternaria tenissima)
Botrytis Blight
(Botrytis sp.)
Fusarium Leaf Spot
(Fusarium moniliforme)
Helminthosporium Leaf Spot
(Helminthosporium sp.)
Ink Spot
(Drechslera iridis)
Ray Blight
(Ascochyta chrysanthami)
Tulip Fire
(Botrytis tulipae)
Daffodil Leaf Scorch*
(Stagnosporo curtissi)
Blossom Blight*
(Monilinia fructicola)
1.0 to 2.0 7 to 14 days Spray plants to insure thorough coverage.
Do not apply more than 2.5 pounds product/acre per application.
Do not make more than 4 applications per year.
Under severe disease pressure, use the highest recommended rate and/or the shortest spray interval. When disease pressure is light
to moderate, the lower rates and longer intervals are recommended.
NOTE: A resin based surfactant should be added to foliar sprays for use on iris, lillies, and tulips.
*Not registered for use in California
HOW TO USE CHIPCO®26019 N/G FUNGICIDE AS A DRENCH
Apply CHIPCO® 26019 N/G Fungicide as a drench at seeding and/or after transplanting for Rhizoctonia control at the following rates
and interval:
DISEASE PRODUCT/100 GALS INTERVAL OF APPLICATION
Rhizoctonia Stem and Root Rot
(Rhizoctonia spp.) 6 1/2 ounces
Apply 1 to 2 pints of solution per square foot. 14 Days
Do not exceed a total of 17.6 oz. product/1000 ft2per year.
Do not make more than 6 applications per year.
Under severe disease pressure, use the highest recommended rate. When disease pressure is light to moderate, the lower rate is
recommended.
NOTE: Do not use CHIPCO®26019 N/G Fungicide as a drench on Impatiens or Pothos.
Do not use CHIPCO®26019 N/G Fungicide on Spathiphyllum.

7
HOW TO USE CHIPCO®26019 N/G FUNGICIDE AS A DIP
PLANT
SPECIES
DISEASE POUNDS PRODUCT PER
100 GALLONS
DIP
DURATION
DIRECTIONS
Rose Botrytis Storage Rot
(Botrytis sp.) 1.0 5 Minutes Dip bare root roses prior to cold storage.
Azalea and
Rhodendron Cylindrocladium Blight and Wilt*
(Cylindrocladium scoparium) 1.0 5 Minutes Dip cuttings prior to planting.
Gladiolus Fusarium Corm Rot
(Fusarium oxysporum) 2.0 5 Minutes Dip corms prior to storage.
*Not registered for use in California
IMPORTANT: READ BEFORE USE
Read the entire Directions for Use, Conditions, Disclaimer of Warranties and Limitations of Liability before using this product. If terms
are not acceptable, return the unopened product container at once.
By using this product, user or buyer accepts the following conditions, warranty, disclaimer of warranties and limitations of liability.
CONDITIONS: The directions for use of this product are believed to be adequate and should be followed carefully. However, because
of extreme weather and soil conditions, manner of use and other factors beyond Bayer Environmental Science’s control, it is impossible
for Bayer Environmental Science to eliminate all risks associated with the use of this product. As a result, crop injury or ineffectiveness
is always possible. All such risks shall be assumed by the user or buyer.
DISCLAIMER OF WARRANTIES: THERE ARE NO WARRANTIES, EXPRESSED OR IMPLIED, OF MERCHANTABILITY OR OF
FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE, WHICH EXTEND BEYOND THE STATEMENTS MADE ON THIS
LABEL. No agent of Bayer Environmental Science is authorized to make any warranties beyond those contained herein or to modify
the warranties contained herein. Bayer Environmental Science disclaims any liability whatsoever for incidental or consequential
damages, including, but not limited to, liability arising out of breach of contract, express or implied warranty (including warranties of
merchantability and fitness for a particular purpose), tort, negligence, strict liability or otherwise.
LIMITATIONS OF LIABILITY: THE EXCLUSIVE REMEDY OF THE USER OR BUYER FOR ANY AND ALL LOSSES, INJURIES OR
DAMAGES RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT, WHETHER IN CONTRACT, WARRANTY, TORT,
NEGLIGENCE, STRICT LIABILITY OR OTHERWISE, SHALL NOT EXCEED THE PRUCHASE PRICE PAID, OR AT BAYER
ENCIRONMENTAL SCIENCE’S ELECTION, THE REPLACEMNET OF PRODUCT.
Bayer AG, 2003
NET CONTENTS:
CHIPCO and ALIETTE are registered trademarks of the Bayer AG.
SIGNATURE is a trademark of the Bayer AG.
Daconil is a registered trademark of Syngenta Corporation.
Bayer Environmental Science
A Business Group of Bayer CropScience, LP
PO Box 12014, 2 T. W. Alexander Drive
Research Triangle Park, NC 27709
09/27/00, Notif 08-04-05