BDI CENTRO 6402 User manual

CENTRO™6402
RETURN
LET’S GET STARTED.
INSTRUCTION MANUAL
DESIGN MATTHEW WEATHERLY

BDIUSA.COM | 3NEED ASSISTANCE? cust[email protected]om
Congratulations on the purchase of your Centro Return 6402 from BDI. Your return has
been designed to provide a lifetime of enjoyment. This manual will provide you with
assembly instructions and other helpful information that will ensure that you get the
most out of your product. Please save it for future reference.
Your Centro Return has been engineered for simple assembly. Please follow these
directions carefully to prevent any damage.
Should you need further assistance, contact BDI at [e-mail].
ENJOY!

4 | BDIUSA.COM CENTRO 6402
PART # C2
DESCRIPTION Frame Assembly
QUANTITY 1
PART # C1
DESCRIPTION Glass Panel
QUANTITY 1
PART # C3
DESCRIPTION Leg
QUANTITY 1
PART # H6
DESCRIPTION 1/4-20 x
12mm Screw
QUANTITY 2
PART # T1
DESCRIPTION Hex Wrench
QUANTITY 1
PART # H11
DESCRIPTION Cord Wrap
QUANTITY 3
PART # H9
DESCRIPTION Leveler Glide
QUANTITY 2
PART # H13
DESCRIPTION Bumper
QUANTITY 6
PART # H7
DESCRIPTION 1/4-20 x
38mm Screw
QUANTITY 4
PART # H12
DESCRIPTION Snap Fastener
QUANTITY 3
HARDWARE AND COMPONENTS
HARDWARE AND COMPONENTS
Unpack and identify the parts listed below. The assembly workspace should be a non-marring
surface such as carpet. For missing hardware pieces, please contact BDI Customer Service at
customerservic[email protected]om.
Do not use power tools for assembly of this product.
For all other concerns, please contact your BDI retailer.

BDIUSA.COM | 5NEED ASSISTANCE? cust[email protected]om
STEP 1. INSTALL LEG TO FRAME ASSEMBLY
STEP 2. INSTALL CORD WRAPS & BUMPERS
Install (H9) Glides to the bottom of (C3) Leg.
Attach (C3) Leg to (C2) Frame Assembly with (H7) Screws.
Install (H11) BDI Cord Wraps using (H12) Snap
Fasteners into hole locations as shown. Install
(H13) Bumpers into holes as shown.
PART/DESCRIPTION QTY
H7-SCREW 4
H9-GLIDE 2
PART/DESCRIPTION QTY
H11-CORD WRAP 3
H12-SNAP FASTENER 3
H13-BUMPER 6
ASSEMBLY
ASSEMBLY
C3
C2
H9
H9
H7
H7
H13
H13 H13
H13
H11
H11
H12
H11
H13

6 | BDIUSA.COM CENTRO 6402
STEP 1. ATTACH THE BASEASSEMBLY STEP 3. ATTACH TO CENTRO DESK (6401)ASSEMBLY
Remove glass top from the Centro Desk (6401).
Position the (C2) Frame Assembly at the desired
end of the Centro Desk. Attach the Return to the
Desk with (H6) Screws using (T1) Hex Wrench.
Carefully place (C1) Glass Panel on top of Return.
Reinstall desk glass.
CAUTION! Do not over tighten screws.
PART/DESCRIPTION QTY
T1-HEX WRENCH 1
H6-SCREW 2
Centro Desk (6401)
with glass removed
Return (6402)
H6
H6

BDIUSA.COM | 7NEED ASSISTANCE? cust[email protected]om
CARE & MAINTENANCE
GLASS
The glass surface is maintained using household glass cleaner and a paper towel or cloth.
SATIN-ETCHED GLASS
This uniquely smooth-to-the-touch glass surface can be regularly maintained using household glass
cleaner and a paper towel or cloth. Minor scratches or scuffs not eliminated using paper towel or
cloth can usually be removed by using a ‘Magic Eraser’. Magic Eraser is a melamine foam product
available at any grocery store or home improvement center. Dampen the entire glass surface and the
Magic Eraser, then rub the entire glass surface in broad, even strokes using moderate pressure. Clean
and dry the surface with a paper towel. Check for results and repeat as necessary.
Any scratches or scuffing not eliminated by one of the above methods can often be addressed by
‘refreshing’ the glass. This is a process that should not be required more than once per 6-12 months.
See this brief video for the simple method: www.bdiusa.com/glass
WOOD
Wood surfaces should be cleaned with a slightly damp (not saturated) cloth or paper towel. Do not
use glass cleaner on wood. If moisture remains, dry the surface with another cloth. If needed, a
gentle non-abrasive cleanser may be used, but be sure to wipe away all cleaner residue and dry the
surface with a cloth.
BDI’s wood finishes feature natural hardwood solids and veneers. Wood is a product of nature and—
unlike man-made materials that can be manufactured to strict and consistent specifications—has
natural imperfections that are part of its appeal and character. Every piece of wood differs from
every other, even when coming from the very same tree. As such, variation in grain, texture and tone
should be expected from one panel or piece of furniture to the next.
While BDI’s stained wood finishes are stable in tone & appearance, all finishes are subject to some
degree of discoloration with prolonged exposure to direct sunlight. Please take care to avoid
positioning your BDI cabinet in any area with extensive direct sunlight. To learn more about the
features of natural wood, visit www.bdiusa.com/wood
METAL & PAINTED SURFACES
Surfaces should be cleaned with a slightly damp (not saturated) cloth or paper towel. If moisture
remains, dry the surface with another cloth. If needed, a gentle non-abrasive cleanser may be used,
but be sure to wipe away all cleaner residue and dry the surface with a cloth.

WARRANTY
PRODUCT REGISTRATION
WARNING
BDI warrants to the original purchaser that for the below-stated warranty term, BDI will repair or
replace any product, part, or component covered by this warranty that fails under normal use as a
result of a defect in material or workmanship. BDI will repair or replace the aforementioned product,
part or component with a comparable product, part or component. The decision to repair or replace
will be at BDI’s sole discretion.
BDI Home Theater Furniture, Office Furniture, Modular Systems, Tables, and other furniture pieces are
warranted for three (3) years from the date of purchase as shown on your sales receipt. The warranty
period starts from the date of purchase. This warranty extends only to the original purchasers who
acquire new products from BDI Authorized Resellers. Any product, part, or component must have
been assembled, installed, used, and maintained according to BDI’s published instructions to be
eligible for warranty coverage. Any modification to the original product voids the warranty.
To view BDI’s complete warranty information, visit www.bdiusa.com/warranty
Registering your new BDI product allows us to send you important product updates, service
information, and helpful hints related to your BDI products. Register today, and you will be entered
to win free a BINK table from BDI: www.bdiusa.com/register
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM FURNITURE TIP-OVER. TO HELP
PREVENT TIP-OVER:
nInstall tip-over restraint.
nPlace heaviest items in lower compartments.
nNever allow children to climb or hang on drawers, doors, or shelves.
nNever open more than one drawer at a time.
USE OF TIP-OVER RESTRAINT MAY REDUCE—BUT NOT ELIMINATE—THE RISK OF TIP-OVER.
These distinctive product configurations are protected by US and international patents, trade
dress, and/or copyright laws. Centro & BDI are trademarks of Becker Designed, Inc. All rights
reserved. ©2021, BDI | V.03.22.2021
Made in China.