Beckhoff CP39-14-0010 Series User manual

Manual | EN
CP39xx-14xx-0010
Stainless steel multi-touch Control Panel with CP-Link 4
10/12/2021 | Version: 1.1

Table of contents
CP39xx-14xx-0010 3Version: 1.1
Table of contents
1 Notes on the documentation ....................................................................................................................5
2 For your safety...........................................................................................................................................6
2.1 Description of safety symbols............................................................................................................6
2.2 Intended use......................................................................................................................................6
2.3 Fundamental safety instructions........................................................................................................6
2.4 Operator's obligation to exercise diligence ........................................................................................7
3 Product overview.......................................................................................................................................8
3.1 Structure ..........................................................................................................................................10
3.2 Interface description ........................................................................................................................11
3.2.1 Power supply, 4-pin round connector .............................................................................. 12
3.2.2 CP-Link 4 ......................................................................................................................... 13
3.2.3 19-pin round connector for signal and power supply ....................................................... 16
3.2.4 4-pin round connector (emergency stop)......................................................................... 16
3.3 Optional interface ............................................................................................................................17
3.4 Optional RFID readers.....................................................................................................................17
3.5 Optional maintenance kit .................................................................................................................17
3.6 Name plate ......................................................................................................................................18
3.7 Connecting cable.............................................................................................................................19
3.8 Optional transmitter box CU8802-000x/ CU8803-000x ...................................................................22
3.8.1 CU8802-000x for CP39xx-14xx-0010.............................................................................. 22
3.8.2 CU8803-000x for CP39xx-14xx-0010.............................................................................. 23
4 Commissioning........................................................................................................................................24
4.1 Transport and unpacking.................................................................................................................24
4.2 Mounting..........................................................................................................................................25
4.2.1 Installing the mounting arm adapter ................................................................................ 26
4.2.2 Dimensions ...................................................................................................................... 30
4.3 Connecting the Control Panel..........................................................................................................33
4.3.1 Circuit diagrams............................................................................................................... 34
4.3.2 Grounding the Control Panel ........................................................................................... 36
4.3.3 Connecting cables and power supply .............................................................................. 37
4.3.4 Commissioning in the TwinCAT System Manager .......................................................... 39
5 Decommissioning....................................................................................................................................42
5.1 Disconnecting the power supply and cables ...................................................................................42
5.2 Disassembly and disposal ...............................................................................................................42
6 Maintenance.............................................................................................................................................45
7 Troubleshooting ......................................................................................................................................48
8 Technical data..........................................................................................................................................49
9 Chemical resistance of stainless steel panel with flush-mounted touch screen..............................50
10 Appendix ..................................................................................................................................................51
10.1 Support and Service ........................................................................................................................51
10.2 Approvals.........................................................................................................................................52

Table of contents
CP39xx-14xx-00104 Version: 1.1

Notes on the documentation
CP39xx-14xx-0010 5Version: 1.1
1 Notes on the documentation
This description is only intended for the use of trained specialists in control and automation engineering who
are familiar with the applicable national standards.
The following instructions and explanations must be followed during installation and commissioning of the
components. The qualified personnel must ensure that the application of the described products meets all
safety requirements, including all applicable laws, specifications, regulations and standards.
Disclaimer
The documentation has been prepared with care. The products described are, however, constantly under
development. For that reason the documentation is not in every case checked for consistency with
performance data, standards or other characteristics. In the event that it contains technical or editorial errors,
we retain the right to make alterations at any time and without warning. No claims for the modification of
products that have already been supplied may be made on the basis of the data, diagrams, and descriptions
in this documentation. All illustrations shown are only examples. The configurations depicted may deviate
from the standard.
Trademarks
Beckhoff®, TwinCAT®, TwinCAT/BSD®, TC/BSD ®, EtherCAT®, EtherCAT G®, EtherCAT G10®, EtherCAT P®,
Safety over EtherCAT®, TwinSAFE®, XFC®, XTS® and XPlanar® are registered and licensed trademarks of
Beckhoff Automation GmbH.
Other designations used in this publication may be trademarks whose use by third parties for their own
purposes could violate the rights of the owners.
Patents
The EtherCAT Technology is covered, including but not limited to the following patent applications and
patents: EP1590927, EP1789857, EP1456722, EP2137893, DE102015105702 and similar applications and
registrations in several other countries.
Copyright
© Beckhoff Automation GmbH & Co. KG. Publication of this document on websites other than ours is
prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the
grant of a patent, utility model or design.
Delivery state
All the components are supplied in particular hardware and software configurations appropriate for the
application. Changes to the hardware or software configuration are permitted, provided they are within the
specified limits for power consumption and power dissipation (please refer to the respective data sheet).
Delivery conditions
In addition, the general delivery conditions of the company Beckhoff Automation GmbH & Co. KG apply.

For your safety
CP39xx-14xx-00106 Version: 1.1
2 For your safety
The Safety chapter first explains the safety symbols used in the documentation and their meanings. They
contain fundamental safety instructions that are essential for the avoidance of personal injuries and damage
to property.
Exclusion of liability
Beckhoff shall not be liable in the event of non-compliance with this documentation and thus the use of the
devices outside the documented operating conditions.
2.1 Description of safety symbols
The following safety symbols are used in these operating instructions. In order to avoid personal injuries and
damage to property, read and follow the safety and warning notices.
Warning of personal injuries:
DANGER
Disregarding the safety notice will lead to death or serious injuries.
WARNING
Disregarding the safety notice may lead to death or serious injuries.
CAUTION
Disregarding the safety notice may lead to minor injuries.
Warning of damage to property:
NOTE
Disregarding the notice may lead to damage to property.
2.2 Intended use
The Control Panels of the CP39xx-14xx-00x0 series in stainless steel design are control and operating
devices that meet strict hygiene requirements and are particularly suitable for the pharmaceutical, food and
packaging industries. The stainless steel Control Panels are designed for installation on a 48mm mounting
arm tube system.
The Control Panels with IP65 protection are characterized by a housing design with minimized gaps. It offers
full protection against contact and against water jets (nozzle) from any angle and against dust. The specified
limits for technical data must be adhered to.
The Control Panel can be used within the documented operating conditions.
Improper use
Do not use the device outside the documented operating conditions.
2.3 Fundamental safety instructions
The following safety instructions must be observed when handling the device.
Application conditions
• Do not use the device under extreme environmental conditions. Protect the device from heat.
• Never use the device in potentially explosive atmospheres.

For your safety
CP39xx-14xx-0010 7Version: 1.1
• Do not carry out any work on the device while it is live. Always switch off the supply voltage for the
device before mounting it, replacing device components or rectifying malfunctions.
• Never connect the device during a thunderstorm. There is a risk of electric shock.
• Ensure that the device has a protective and functional earth connection.
Damage to property, loss of data and impairment of functions
• Ensure that only trained specialists with a control and automation engineering background, operate the
device. Use by unauthorized persons can lead to damage to property and loss of data.
• Protect the power supply cable with a fuse with a max. rating of 16A. The fuse serves to protect the
supply line in the event of a short circuit.
• In case of fire, extinguish the device with powder or nitrogen.
2.4 Operator's obligation to exercise diligence
The operator must ensure that
• the products are used only for their intended purpose (see Chapter 2.2 Intended use [}6]).
• the products are only operated in sound condition and in working order.
• the products are operated only by suitably qualified and authorized personnel.
• the personnel is instructed regularly about relevant occupational safety and environmental protection
aspects, and is familiar with the operating instructions and in particular the safety instructions contained
herein.
• the operating instructions are in good condition and complete, and always available for reference at the
location where the products are used.

Product overview
CP39xx-14xx-00108 Version: 1.1
3 Product overview
The Control Panels of the CP39xx-14xx-00x0 series meet the strict hygiene requirements of the
pharmaceutical, food and packaging industries and can be used directly in the field. A mounting arm adapter
can be ordered separately for installation on a 48mm mounting arm system. The adapter protects all
connections and cables from contamination and chemical impacts.
The stainless steel Control Panels are available in the following three display sizes in 16:10 and 16:9 formats
with corresponding resolution.
• 12.1-inch (1280 x 800)
• 15.6-inch (1366 x 768)
• 18.5-inch (1366 x 768)
The IP65 stainless steel Control Panel has a multi-touch screen with a laminated polyester film over the
entire surface and thus offers enhanced splintering protection. This prevents contamination of the products
should the device become damaged. In order to be able to cover a wide range of hygiene requirements, the
stainless steel devices offer further special features:
• Highly durable polished stainless steel surface
• Minimized clearance thanks to optimized housing design
• The design facilitates draining of spilled liquids, in order to prevent adhesion of contaminants
• Sealing materials provide protection against a wide range of chemical cleaning agents
The stainless steel Control Panels have the following features
• Capacitive multi-touch screen
• Stainless steel housing 1.4301
• Flush-mounted front laminate
• Integrated CP-Link 4 connection technology
◦ CP-Link 4 enables the Panel to be situated up to 100m from the PC, connected via a CP-Link 4
cable with optionally integrated or separate 24VDC power supply, depending on the transmitter
module.
◦ CP-Link 4 transmits USB 2.0 at 100 Mbit/s and DVI
• CP39xx-1400-0010 interfaces in the mounting arm adapter
◦ CP-Link 4
◦ 24 V DC
◦ Single-port USB socket
• CP39xx-1401-0010 interfaces in the mounting arm adapter
◦ CP-Link 4
◦ Single-port USB socket
◦ Power supply via the 19-pin round connector
◦ Emergency stop, three short-stroke keys with LED ring illumination via 19-pin round connector
• CP39xx-1414-0010 interfaces in the mounting arm adapter
◦ CP-Link 4
◦ 24 V DC
◦ Single-port USB socket
◦ 4-pin round connector for emergency stop
◦ Emergency stop
◦ 3 short-stroke keys with LED ring illumination via USB

Product overview
CP39xx-14xx-0010 9Version: 1.1
Push button extension
The following Control Panels can be ordered with push button extension ex works.
• CP3913-1401-0010
• CP3913-1414-0010
• CP3916-1401-0010
• CP3916-1414-0010
• CP3918-1401-0010
• CP3918-1414-0010

Product overview
CP39xx-14xx-001010 Version: 1.1
3.1 Structure
Fig. 1 shows an example of the device configuration representing all CP39xx-14xx-0010 versions.
The Control Panel connection interfaces vary, depending on the product version. Otherwise, there are no
differences in the external design of the device.
1
2
7
8
3
5
46
Fig.1: CP39xx-14xx-0010_configuration
Table1: Key for CP39xx-14xx-0010 configuration
No. Component Description
1 Mounting arm tube Mounting arm tube for installation from below or
above
2 Optional RFID RFID integrated in the push button extension
3 Display and touch screen glass Operating the Control Panel
4 Optional mounting arm adapter Adapter for installation from below or above
5 FCC label FCC approval
6 Connection compartment Access to the interfaces
7 Bolt plate Assembly aid for mounting arm adapter
8 Name plate Information on the Control Panel equipment

Product overview
CP39xx-14xx-0010 11Version: 1.1
3.2 Interface description
The connection options of the CP39xx-14xx-0010 vary, depending on the product version. The following
view illustrates the configuration of the connector panels.
• CP39xx-1400-0010 (A) connection section
• CP39xx-1401-0010 (B) connection section
• CP39xx-1414-0010 (C) connection section
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
B
A C
1 4 5
6 7
2
3
Fig.2: CP39xx-14xx-0010_connection section
Table2: Key for CP39xx-1400-0010, CP39xx-1401-0010, CP39xx-1414-0010 connection section
No. Component Description
1 Single-port USB interface under screw cap Connection of peripheral devices
2 CP-Link 4 CP-Link 4 allows the Panel to be located up to
100 m from the PC via a CP-Link 4 cable
3 Protective conductor connection (PE) Low-resistance protective earth and functional
earth for the Control Panel
4 4-pin round connector Power supply for CP39xx-1400-0010,
CP39xx-1414-0010 Control Panels
5 4-pin round connector, sealed Function via the 19-pin round connector of the
CP39xx-1400-0010 Control Panel
6 19-pin round connector Control Panel power supply and push button
extension of the CP39xx-1401-0010
7 4-pin round connector CP39xx-1414-0010 emergency stop connection

Product overview
CP39xx-14xx-001012 Version: 1.1
3.2.1 Power supply, 4-pin round connector
The CP39xx-1400-0010 and CP39xx-1414-0010 Control Panels are supplied with a nominal input voltage of
24 V. The power supply is connected via a 4-pin M12 socket with IP65 protection. The socket is connected
to + 24 V and GND.
Fig.3: CP39xx-1400-0010_CP39xx-1414-0010_power supply, 4-pin
Table3: Pin assignment of the 4-pin voltage socket
Pin Signal
1 + 24V DC
2 GND
3 GND
4 + 24V DC
Due to the dual connection, maximum wire cross-sections of 4 x 0.75 mm2 can be accommodated. For long
supply lines, use 4 x 0.75 mm2 cables to achieve a low voltage drop on the supply lines. There should be at
least 22V at the power supply plug of the Control Panel, so that the Control Panel remains switched on
during voltage fluctuations. You can obtain a replacement plug from your Beckhoff Sales using the following
ordering option:
• C9900-P916: Power supply connector for CP39xx, round connector IP65 with strain relief for the
external supply cable.

Product overview
CP39xx-14xx-0010 13Version: 1.1
3.2.2 CP-Link 4
The CP39xx-14xx-0010 Control Panel has a CP-Link 4 input in the form of an 8-pin M12 socket. Via the
interface the Control Panel can be connected to an Industrial PC over a distance of up to 100 m. The device
can be connected to the Industrial PC either directly with a corresponding PCIe module or indirectly via an
intermediate CU8802/ CU8803 transmitter box.
Fig.4: CP39xx-1400-0010_ CP39xx-1401-0010_CP39xx-1414-0010_CP-Link 4
Table4: Pin assignment of the CP-Link 4 socket
Pin Signal
1 CP-Link4_0P
2 CP-Link4_0N
3 CP-Link4_1P
4 CP-Link4_1N
5 CP-Link4_3P
6 CP-Link4_3N
7 CP-Link4_2N
8 CP-Link4_2P
S1 Shield
S2 Shield
S3 Shield
On an Industrial PC with PCIe module, CP-Link 4 is available as a Two Cable Display Link. The Control
Panel can be connected directly to the Industrial PC via the module. USB 2.0 (100 Mbit/s) and DVI are
transmitted together via a CP-Link 4 cable. The CP39xx-14xx-0010 requires an additional 24 V power supply
(see Fig. 5).
24 V 24 V
C6032 mit CP-Link 4 Modul
CP39xx 14xx-0010
CP-Link 4 (100 m)
Fig.5: CP39xx-14xx-0010_CP-Link 4

Product overview
CP39xx-14xx-001014 Version: 1.1
CP-Link 4 with transmitter box
If the Industrial PC is not equipped with a PCIe module, a transmitter box is required for connecting a
CP39xx-14xx-0010. The transmitter boxes CU8802-000x (Two Cable Display Link) and CU8803-000x (One
Cable Display Link) are available for this purpose.
With the CU8802-000x, the Industrial PC is connected to the transmitter box via USB and DP/DVI. The
transmitter box is then connected to the Control Panel via the CP-Link 4 connection of the transmitter box
using a CP-Link 4 cable. USB and DVI are transmitted together via this cable. An additional power supply is
required for the CP39xx-14xx-0010 (Two Cable Display Link). Figure 6 shows the wire connection to the
CU8802-000x.
CU8802-000x
C 39xxP -14xx-0010
CP-Link 4 (100 m)
CP-Link 4 (100 m)
CP-Link 4 (100 m)
Fig.6: CP39xx-14xx-0010_CP-Link 4 CU8802-000x

Product overview
CP39xx-14xx-0010 15Version: 1.1
With the CU8803-000x, the Industrial PC is also connected to the transmitter box via USB and DP/DVI. The
transmitter box is then connected to the Control Panel via the CP-Link 4 connection of the transmitter box
using a CP-Link 4 cable. With this box, USB, DP/DVI and power supply can be transmitted together via the
cable (One Cable Display Link). No additional power supply is required for the CP39xx-14xx-0010. Figure 7
shows the wire connection to the CU8803-000x.
C 39xxP -14xx-0010
CU8803-000x
CP-Link 4 (100 m)
CP-Link 4 (100 m)
CP-Link 4 (100 m)
Fig.7: CP39xx-14xx-0010_CP-Link 4 CU8803-000x
The following ordering options are available for the transmitter boxes:
• CU8802-0000
• CU8802-0001
• CU8803-0000
• CU8803-0001

Product overview
CP39xx-14xx-001016 Version: 1.1
3.2.3 19-pin round connector for signal and power supply
The push button extension of the CP39xx-1401-0010 is connected via the 19-pin M23 socket.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Fig.8: CP39xx-1401-0010_signal and power supply, 19-pin
Table5: Pin assignment of the 19-pin voltage socket
Pin Signal
1 Emergency stop (break contact 1)
2 Emergency stop (break contact 1)
3 Emergency stop (break contact 2)
4 Emergency stop (break contact 2)
5 Short-stroke key S2 (make contact)
6 GND
7 Short-stroke key S2 (make contact)
8 LED S2 (green)
9 Short-stroke key S3 (make contact)
10 Short-stroke key S3 (make contact)
11 LED S3 (red)
12 PE
13 Short-stroke key S4 (make contact)
14 Short-stroke key S4 (make contact)
15 LED S4 (blue)
16 reserve
17 GND LED S2/ S3/ S4
18 reserve
19 + 24V DC
3.2.4 4-pin round connector (emergency stop)
The 4-pin M12 socket is used to connect the emergency stop in the push button extension.
Fig.9: CP39xx-1414-0010_round connector for emergency stop, 4-pin
Table6: Pin assignment of 4-pin emergency stop connection socket
Pin Signal
1 Break contact 1
2 Break contact 1
3 Break contact 2
4 Break contact 2

Product overview
CP39xx-14xx-0010 17Version: 1.1
3.3 Optional interface
You can expand the Control Panels beyond the basic equipment to include an externally routed USB
interface in the mounting arm adapter. The following ordering option is available for this purpose.
Table7: USB interface ordering option
Options Description
C9900-E299 Single-port USB-A interface with stainless steel IP65 screw cap, outlet in the side panel of
the C9900-M759 mounting arm adapter; IP65 USB A plug on other side, occupies the
USB port in the connection section, single part, not mounted
4
3
2
1
Fig.10: CP39xx-14xx-0010_optional USB interface
Table8: USB interface pin assignment
Pin Assignment
Shield GND
1 Vbus
2 D -
3 D +
4 GND
3.4 Optional RFID readers
The stainless steel Control Panels can be extended with an integrated RFID reader in the push button
extension. The following ordering option is available for this purpose.
Table9: RFID reader ordering option
Options Description
C9900-E295 RFID reader for ISO14443 A/B, ISO 15693, Mifare
Classic, Mifare Plus, Mifare DESFire,
Legic RF standards, Sony FeliCa read/write, 13.56
MHz, connection via USB, mounted under the front
laminate
3.5 Optional maintenance kit
The C9900-M759 mounting arm adapter connects the Control Panel to the mounting arm system and
protects the connections and cables from aggressive cleaning agents, water and dirt. The seals of the
mounting arm adapter should therefore be checked regularly for tightness. A replacement seal kit C9900-
Z494 is available for replacing worn seals. The set contains all the required seals and screws for C9900-
M735, C9900-M736, C9900-M759 and C9900-M764.
Table10: Maintenance set ordering option
Option Description
C9900-Z494 Replacement seals, accessories and mounting
hardware for C9900-M759, C9900-M764, C9900-
M735 and C9900-M736

Product overview
CP39xx-14xx-001018 Version: 1.1
3.6 Name plate
The name plate provides information about the Control Panel equipment.
9
8
7
1
2
3
4
5
6
xxxxxxxx
xx
Fig.11: CP39xx-14xx-00x0_name plate
Key for CP39xx-14xx-0010 name plate
No. Description
1 Device name
2 Serial number (BTN)
3 Date of manufacture
4 Display
5 Touch screen
6 24 VDC power supply, NEC class 2
7 FCC approval
8 Symbols
Note: Here you will find the symbols that apply to the device: CE, EAC, UKCA, The
approvals for your device can be found on the name plate and in chapter 10.2 Approvals [}52]
9 Address of the vendor

Product overview
CP39xx-14xx-0010 19Version: 1.1
3.7 Connecting cable
Optionally, ready-made connection cables for all connections are available in various lengths. You can order
them using the following article descriptions.
Power supply line
Fig.12: CP39xx-1400-0010 CP39xx-1414-0010_power supply, 4-pin
Table11: 4-pin power supply cable for CP39xx-1400-0010 CP39xx-1414-0010
Connection cable Description
C9900-K742 Power cable for Control Panel, drag-chain suitable, with 4-pin round connector,
5m, consisting
of:
- Power cable 2x0.75mm² conforming to UL, cores color-coded
- Side A: Round 4-pin socket
- Side B: not used
C9900-K743 Power cable for Control Panel, drag-chain suitable, with 4-pin round connector,
10m, consisting
of:
- Power cable 2x0.75mm² conforming to UL, cores color-coded
- Side A: Round 4-pin socket
- Side B: not used
C9900-K744 Power cable for Control Panel, drag-chain suitable, with 4-pin round connector,
20m, consisting
of:
- Power cable 2x0.75mm² conforming to UL, cores color-coded
- Side A: Round 4-pin socket
- Side B: not used
Sensor cable
Fig.13: CP39xx-1414-0010_emergency stop sensor cable
Table12: CP39xx-1414-0010 emergency stop sensor cable
Connection cable Description
ZK2000-6100-0050 Sensor cable, M12, plug, straight, pin, 4-pin, A-coded open end 5m
ZK2000-6100-0100 Sensor cable, M12, plug, straight, pin, 4-pin, A-coded open end 10m
ZK2000-6100-0150 Sensor cable, M12, plug, straight, pin, 4-pin, A-coded open end 15m
ZK2000-6100-0300 Sensor cable, M12, plug, straight, pin, 4-pin, A-coded open end 30m

Product overview
CP39xx-14xx-001020 Version: 1.1
signal line
Fig.14: CP39xx-1401-0010_power supply, 19-pin
Table13: CP39xx-1401-0010 19-pin signal line
Connection cable Description
C9900-K618 Signal and power supply cable for push button extension, drag-chain suitable,
length 5m, 3x1mm² + 16x0.34mm², pre-assembled, M23 socket IP65,
screwable, 19-core, second end open
C9900-K619 Signal and power supply cable for push button extension, drag-chain suitable,
length 10m, 3x1mm² + 16x0.34mm², pre-assembled, M23 socket IP65,
screwable, 19-core, second end open
C9900-K620 Signal and power supply cable for push button extension, drag-chain suitable,
length 20m, 3x1mm² + 16x0.34mm², pre-assembled, M23 socket IP65,
screwable, 19-core, second end open
C9900-K668 Signal and power supply cable for push button extension, drag-chain suitable,
length 30m, 3x1mm² + 16x0.34mm², pre-assembled, M23 socket IP65,
screwable, 19-core, second end open