Beckhoff Cp6900-0001-0010 User manual

Manual | EN

CP6900-0001-0010

Control Panel

2023-07-19 | Version: 2.0

Table of contents

CP6900-0001-0010 3Version: 2.0

Table of contents

1 Notes on the documentation....................................................................................................................5

2 For your safety ..........................................................................................................................................6

2.1 Signal words......................................................................................................................................6

2.2 Intended use .....................................................................................................................................6

2.3 Fundamental safety instructions .......................................................................................................7

2.4 Operator's obligation to exercise diligence........................................................................................7

2.5 Notes on information security............................................................................................................8

3 Product overview ......................................................................................................................................9

3.1 Structure..........................................................................................................................................10

3.2 Interface description........................................................................................................................10

3.2.1 Power supply.................................................................................................................... 11

3.2.2 USB output....................................................................................................................... 11

3.2.3 USB input .........................................................................................................................12

3.2.4 USB Extended input......................................................................................................... 12

3.3 Name plate......................................................................................................................................13

3.4 Connection kits................................................................................................................................14

4 Commissioning .......................................................................................................................................15

4.1 Transport and unpacking ................................................................................................................16

4.2 Control cabinet installation ..............................................................................................................16

4.3 Connecting the Control Panel .........................................................................................................19

4.3.1 Mounting power supply cable........................................................................................... 19

4.3.2 Grounding the Control Panel............................................................................................ 20

4.3.3 Connecting cables and power supply .............................................................................. 21

5 Decommissioning ...................................................................................................................................23

5.1 Disconnecting the power supply and cables ...................................................................................23

5.2 Disassembly and disposal...............................................................................................................24

6 Maintenance ............................................................................................................................................25

7 Troubleshooting......................................................................................................................................27

8 Technical data .........................................................................................................................................28

9 Appendix..................................................................................................................................................29

9.1 Service and support ........................................................................................................................29

9.2 Approvals ........................................................................................................................................30

Table of contents

CP6900-0001-00104 Version: 2.0

Notes on the documentation

CP6900-0001-0010 5Version: 2.0

1 Notes on the documentation

This description is only intended for the use of trained specialists in control and automation engineering who

are familiar with the applicable national standards.

The following instructions and explanations must be followed during installation and commissioning of the

components. The responsible staff must ensure that the application or use of the products described satisfy

all the requirements for safety, including all the relevant laws, regulations, guidelines and standards.

Disclaimer

The documentation has been prepared with care. The products described are, however, constantly under

development. For that reason the documentation is not in every case checked for consistency with

performance data, standards or other characteristics. In the event that it contains technical or editorial errors,

we retain the right to make alterations at any time and without warning. No claims for the modification of

products that have already been supplied may be made on the basis of the data, diagrams, and descriptions

in this documentation. All illustrations shown are only examples. The configurations depicted may deviate

from the standard.

Trademarks

Beckhoff®, TwinCAT®, TwinCAT/BSD®, TC/BSD ®, EtherCAT®, EtherCAT G®, EtherCAT G10®, EtherCAT P®,

Safety over EtherCAT®, TwinSAFE®, XFC®, XTS® and XPlanar® are registered and licensed trademarks of

Beckhoff Automation GmbH.

Other designations used in this publication may be trademarks whose use by third parties for their own

purposes could violate the rights of the owners.

Patents

The EtherCAT Technology is covered, including but not limited to the following patent applications and

patents: EP1590927, EP1789857, EP1456722, EP2137893, DE102015105702 and similar applications and

registrations in several other countries.

grant of a patent, utility model or design.

Delivery state

All the components are supplied in particular hardware and software configurations appropriate for the

application. Changes to the hardware or software configuration are permitted, provided they are within the

specified limits for power consumption and power loss (please refer to the respective data sheet).

Currentness

Please check whether you are using the current and valid version of this document. The current version is

always available for download from the Beckhoff website. In case of doubt, contact Technical Support.

Delivery conditions

In addition, the general delivery conditions of the company Beckhoff Automation GmbH & Co. KG apply.

For your safety

CP6900-0001-00106 Version: 2.0

2 For your safety

The signal words and their meanings are explained in the chapter on safety. They contain fundamental

safety instructions that are essential for the avoidance of personal injuries and damage to property.

Exclusion of liability

Beckhoff shall not be liable in the event of non-compliance with this documentation and thus the use of the

devices outside the documented operating conditions.

2.1 Signal words

The signal words used in the documentation are classified below.

Warning of personal injuries

DANGER

Hazard with high risk of death or serious injury.

WARNING

Hazard with medium risk of death or serious injury.

CAUTION

There is a low-risk hazard that can result in minor injury.

Warning of property and environmental damage

NOTICE

There is a possibility of damage to the environment, equipment or data.

2.2 Intended use

The control panel is designed for industrial application in machine and system engineering. It serves as the

operating unit of the machine or plant.

The front of the panel PC is designed for an IP54 working environment. There is complete protection against

contact and against dust in harmful quantities, as well as protection against splash water on all sides.

The rear side is designed for a working environment that meets the IP20 protection rating. This involves

finger protection and protection against solid foreign objects up to 12.5 mm. There is no protection against

water. Operation of the device in wet and dusty environments is not permitted. The specified limits for

technical data must be adhered to.

The specified limits for technical data must be adhered to.

The device can be used within the documented operating conditions.

Improper use

Do not use the device outside the documented operating conditions.

For your safety

CP6900-0001-0010 7Version: 2.0

2.3 Fundamental safety instructions

The following safety instructions must be observed when handling the the Industrial PC.

Application conditions

• Do not use the device under extreme environmental conditions.

• Only use the device in hazardous areas if it is explicitly designed for this purpose.

• Do not carry out any work on the device while it is live. Always switch off the supply voltage for the

device before mounting it, replacing device components or rectifying malfunctions.

• Never plug or unplug connectors during thunderstorms. There is a risk of electric shock.

• Ensure that the device has a protective and functional earth connection.

Damage to property, loss of data and impairment of functions

• Ensure that only trained specialists with a control and automation engineering background, operate the

device. Use by unauthorized persons can lead to damage to property and loss of data.

• In the case of a 24 V DC power supply unit, fuse the power supply line according to its cross-section to

protect the supply line in the event of a short circuit.

• In case of fire, extinguish the device with powder or nitrogen.

2.4 Operator's obligation to exercise diligence

The operator must ensure that

• the products are used only for their intended purpose (see Chapter 2.2 Intended use [}6]).

• the products are only operated in sound condition and in working order.

• the products are operated only by suitably qualified and authorized personnel.

• the personnel is instructed regularly about relevant occupational safety and environmental protection

aspects, and is familiar with the operating instructions and in particular the safety instructions contained

herein.

• the operating instructions are in good condition and complete, and always available for reference at the

location where the products are used.

For your safety

CP6900-0001-00108 Version: 2.0

2.5 Notes on information security

The products of Beckhoff Automation GmbH & Co. KG (Beckhoff), insofar as they can be accessed online,

are equipped with security functions that support the secure operation of plants, systems, machines and

networks. Despite the security functions, the creation, implementation and constant updating of a holistic

security concept for the operation are necessary to protect the respective plant, system, machine and

networks against cyber threats. The products sold by Beckhoff are only part of the overall security concept.

The customer is responsible for preventing unauthorized access by third parties to its equipment, systems,

machines and networks. The latter should be connected to the corporate network or the Internet only if

appropriate protective measures have been set up.

In addition, the recommendations from Beckhoff regarding appropriate protective measures should be

observed. Further information regarding information security and industrial security can be found in our

https://www.beckhoff.com/secguide.

Beckhoff products and solutions undergo continuous further development. This also applies to security

functions. In light of this continuous further development, Beckhoff expressly recommends that the products

are kept up to date at all times and that updates are installed for the products once they have been made

available. Using outdated or unsupported product versions can increase the risk of cyber threats.

To stay informed about information security for Beckhoff products, subscribe to the RSS feed at https://

www.beckhoff.com/secinfo.

Product overview

CP6900-0001-0010 9Version: 2.0

3 Product overview

The Economy built-in Control Panel is designed for installation in the front of a control cabinet. It can be used

for various automation tasks.

The control panel has the following features:

• 10.1-inch display, 1024 x 600 resolution

• Single-finger touch screen

• Aluminum front with sheet-steel rear cover, front IP54, rear IP20

• Control cabinet installation via pull-out clamping levers for fast installation without loose parts

• 24VDC power supply unit

Push button extension

You have the possibility to order the control panel with the following push button extensions:

• C9900-G072: push button extension for CP6x00 with horizontal 10.1-inch display

• C9900-G073: push button extension for CP6x00 with horizontal 10.1-inch display

For explanations of the push button extensions and the functions, refer to the manual C9900-G072/G073.

Figure 1 shows the control panel without (A) and with (B) push button extension.

A B

Fig.1: Without and with push button extension

Product overview

CP6900-0001-001010 Version: 2.0

3.1 Structure

Fig.2: Structure

Table1: Legend structure CP6900-0001-0010

No. Component Description

1 Clamping lever Mounting the control panel in the control cabinet wall

2 Name plate Information on the control panel equipment

3 Access to interfaces Interfaces on the underside

4 Display and touch screen glass Operating the control panel

3.2 Interface description

The CP6900-0001-0010 has the following interfaces:

• Power supply (X101)

• USB output (X102, X103)

• USB input (X104)

• USB Extended input (X105)

• DVI Extended input (X106)

The interfaces are located on the back of the control panel at the bottom of the connection section (see fig.

3).

Fig.3: Connection section

Product overview

CP6900-0001-0010 11Version: 2.0

3.2.1 Power supply

The control panel is supplied with a nominal input voltage of 24VDC. The power supply and the protective

earth of the device are connected via the 5-pin voltage socket (X101).

X101

1 2 345

Fig.4: Power supply pin numbering

Table2: Voltage socket pin assignment

Pin Signal Description

1 NC not used

2 NC not used

3 Protective earth

4 - Negative pole power supply 24V

5 + 24V 24V power supply, positive pole

The plug for the power supply is specified for 16A and can accommodate wire cross-sections of up to

1.5mm2. For long supply lines, use 1.5 mm2 cables to achieve a low voltage drop on the supply line. There

should be at least 22V at the power supply plug of the control panel, so that the control panel remains

switched on during voltage fluctuations. The plug is included in the delivery. You can obtain a replacement

plug from your Beckhoff Sales using the following ordering option:

• C9900-P927: Power supply connector for CP690x Control Panel, 5-pin connector with strain relief for

the external supply cable

3.2.2 USB output

The control panel has two USB outputs (X102, X103) with socket type A. The interfaces are used to connect

peripheral devices with USB connection. USB specification 2.0 is supported.

1 2 3 4

321

X102

X103

Fig.5: USB interface pin numbering

Table3: USB interface pin assignment

Pin Connection

1 Vbus

2 D -

3 D +

4 GND

Product overview

CP6900-0001-001012 Version: 2.0

3.2.3 USB input

The control panel has a USB input (X104) with socket type B. The USB input is used to connect the control

panel directly to the standard output of an industrial PC at distances of up to 5m. USB specification 2.0 is

supported.

X104

Fig.6: USB input pin numbering

Table4: USB interface pin assignment

Pin Connection

1 Vbus

2 D -

3 D +

4 GND

3.2.4 USB Extended input

The control panel has a USB Extended input (X105) in the form of an RJ45 socket. The control panel is

connected to the CU8801 USB-to-USB Extended converter box via the interface. The interface transmits

USB 2.0 with 480Mbit/s.

To realize a distance of 50m without hubs, USB Extended converts the USB signal so that it can be

transmitted via a 50m CAT-5 cable. In the control panel the signal is converted back to USB. This is not an

Ethernet connection. No Ethernet switch or hub can be integrated in the USB-Extended cable.

8 1

X105

Fig.7: USB-E input pin numbering

Table5: USB-E input pin assignment

Pin Signal Description

1 T2 + Pair 2

2 T2 -

3 T3 + Pair 3

4 T1 + Pair 1

5 T1 -

6 T3 - Pair 3

7 T4 - Pair 4

8 T4 -

Product overview

CP6900-0001-0010 13Version: 2.0

3.3 Name plate

The name plate provides information about the control panel equipment. The name plate shown here serves

only as an example.

7 8 9 10 11 12

15 14

xxxxxxxx

Fig.8: Name plate

Table6: Legend name plate CP6900-0001-0010

No. Description

1 Model: The last four digits indicate the device generation.

2 Serial number (BTN)

3 Date of manufacture

4 Display

5 Touch screen

6 Power supply: 24VDC, NEC class 2

7 Grounding bolt for functional earthing of the control panel

8 Connection of the power supply and protective earth of the control panel (X101)

9 USB output (X102, X103)

10 USB input (X104)

11 USB Extended Interface (X105)

12 DVI Extended interface (X106)

13 Symbols

Note: Here are the symbols applicable to the device such as CE, EAC, UKCA, . The

approvals of your device can be found on the name plate and in chapter 9.2 Approvals [}30].

14 FCC approval

15 Variant number: commercial number of the order code including ordering options

Product overview

CP6900-0001-001014 Version: 2.0

3.4 Connection kits

The following optional connection kits are available:

Table7: Connection kits CP6900-0001-0010

Connection kits Description

C9900-K560 1 m connection kit for CP69xx, consisting of:

DVI cable 1m, USB cable 1m

C9900-K513 3 m connection kit for CP69xx, consisting of:

DVI cable 3m, USB cable 3m

C9900-K515 5 m connection kit for CP69xx, consisting of:

DVI cable 5m, USB cable 5m

C9900-K625 10m connection kit for CP29xx-0000, CPX29xx-0000 and CP69xx-xxxx-0010

consisting of:

10m DVI cable, 10m Cat.5 cable for USB-E 2.0, CU8801 USB-to-USB-E 2.0

converter for DIN rail mounting next to the PC and 1m USB cable for connecting the