Bedfont GastroCH4ECK Gastrolyzer User manual

Bedfont® Scienc Ltd.
Staon Road, Harrietsham, Maidstone
Kent, ME17 1JA, England
Tel: [phone], Fax: [phone]
Email: [e-mail] Web: www.bedfont.com
Issue 1 - February 2021, Part No: LAB741_AX_USA
Bedfont® Scienc Limited reserve the right to change or
update this literature without prior noce.
Registered in: England and Wales. Registered No: 1289798
© Bedfont® Scienc Limited 2021
GastroCH4ECK®
Gastrolyzer®
Quick Start Guide
Bedfont® GmbH
Mierbachweg 18, 5081, Anif, Austria
Tel: [phone] Fax: [phone]
Email: [e-mail]

1. Remove the blue plugs from the breath bag
2. Place two clamps on the inlet and outlet but leave them open
3. Aach a mouthpiece to the inlet
4. Exhale gently into the bag unl your lungs are nearly empty
5. When your lungs are nearly empty, close the clamp at the outlet
6. Fill the bag and then close the clamp at the inlet
7. Replace the blue plugs
8. To take mulple breath bag samples, repeat steps 1-7 with new breath bags.
1. Make sure the power cord is connected and the GastroCH4ECK® is switched on
2. Aach the moisture lter to the bag sample connector
3. Press
4. Remove the blue plug from one end of the breath bag and aach to the moisture
lter. Open the clamp on the inlet of the breath bag
5. Press to begin breath bag sampling
6. will be shown onscreen while the sensor is zeroing
7. Once zeroed, the GastroCH4ECK® will automacally begin bag sampling for 45
seconds as indicated by make sure that the clamp is open
8. The nal results will be shown onscreen
9. Press for a visual indicator of the results:
= good = sasfactory = poor, retake test
10. Press to return to the results
11. To take another test, press and then repeat steps 3-10.
Collect a breath bag sample
Analyse breath bag sample