Bennett Read Tough 18 User manual

USER GUIDE
DOUBLE-UP YOUR GUARANTEE!
SCAN* TO REGISTER YOUR
EXTRA 1 YEAR GUARANTEE
* HOW? IT’S SIMPLE REALLY…
• SWITCH ON YOUR MOBILE CAMERA & POINT
IT AT THE QR CODE & TAP THE LINK THAT
POPS UP
• IF THAT DOESN’T WORK, YOU’LL NEED TO
DOWNLOAD & USE A QR CODE SCANNER
APP FROM YOUR PHONE’S APP STORE
WET-DRY-BLOW VACUUM SYSTEM
18
®

1
Thank you for purchasing a BENNETT READ
TOUGH 18 wet & dry vacuum.
Your BENNETT READ TOUGH 18 vacuum incorporates the latest
technological advances in home cleaning systems. It imitates the most
powerful forces of nature in a compact, robust cleaning system to
ensure that your home is easily and properly cleaned.
Your BENNETT READ TOUGH 18 comes with a 1 year guarantee. If
you register your guarantee online within 14 days of purchase, we
will extend the guarantee to 2 years. To activate your extended
guarantee, scan the QR code on the front cover of this user guide,
tap on the link and complete the online form. Alternatively, visit
www.tevo.co.za, click the “Register guarantee” tab at the top of the
page, then complete the form provided.
We also stand behind it with a knowledgeable, dedicated Customer
Care department, so should you ever have a problem, you'll receive
fast, considerate assistance
Should you need any support from us, please visit
www.tevo.co.za or call 0861 77 88 88.
PLEASE KEEP THIS USER GUIDE IN A SAFE PLACE AND
READ IT CAREFULLY BEFORE USING YOUR BENNETT READ
TOUGH 18 VACUUM FOR THE FIRST TIME.

2
» Use the system only for its intended use
» To protect against a risk of electric shock,
do not immerse any part of the system in
water or other liquids
» Do not allow cord to touch hot surfaces
» Do not run appliance over cord
» Do not operate the system with a
damaged cord or plug, or if the
appliance or any other part of the
system has been dropped or
damaged. To avoid the risk of
electric shock, do not disassemble or
attempt to repair your Tough 18. Return
the unit for examination and repair.
Incorrect reassembly or repair can cause a
risk of electrical shock or injury and will
not be covered by the guarantee
» Keep hair, loose clothing, fingers and
all parts of body away from openings
and moving parts
» Do not use to pick up flammable or
combustible liquids such as gasoline or use in
areas where they may be present
» Do not pick up anything that is burning or
smoking such as cigarettes, matches or
hot ashes
» Use extra care when cleaning on stairs
» Do not use the Tough 18 without the
Microparticle filter in place, except when
vacuuming up liquids (Refer to page 6
for operating instructions). When using
as a Wet Vacuum take caution not to
over-fill the tank with liquid to avoid risk
of electrical shock and damage to your
Tough 18
» This appliance is intended for household
use only. Follow all user instructions in
this manual
» Do not leave the Tough 18 plugged in
when unattended
» Unplug the electrical cord when not in
use and before servicing
» Not intended for use by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge
» Do not allow to be used as a toy
» Close attention is necessary when used near
children, pets or plants
» Children should be supervised to ensure that
they do not play with the appliance
» Use only as described in this
manual. Use only manufacturer
recommended accessories
» Do not pull cord, use cord as a handle,
close a door on cord, or pull cord around
sharp edges or corners
» Turn off all controls as applicable before
unplugging from electrical outlet
» Do not unplug by pulling on cord.
To unplug, grasp the plug, not the cord
» Do not handle plug or vacuum with wet
hands or operate without shoes
» Do not put any objects into openings
» Do not use with any opening blocked
»Keep free of dust, lint, hair and anything
else that may reduce airflow
» Store your Tough 18 indoors in a cool,
dry area
» Keep your work area well lit
» Keep end of hose, wands and other
openings away from your face and body
» Using improper voltage may result in
damage to the motor and possible injury
to the user. Correct voltage is listed on
rating label. For operation on a
220-240V, 50/60Hz power supply only
» Use only identical replacement parts
» See instructions for Servicing of
Double-Insulated Appliances.
WARNING:
» To reduce the risk of injury from moving
parts – Unplug before servicing
» To reduce the risk of electric shock –
Unplug before cleaning or servicing
» Do not use outdoors
SAVE THESE INSTRUCTIONS
FOR FUTURE USE.
Not For Commercial Use.
For Household Use Only.
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS
BEFORE USING YOUR VACUUM.
When using your Tough 18, basic safety
precautions should be observed,
including the following:
!
TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK, OR INJURY:
WARNING

3
PRODUCT VIEW
17
14
15
1. Power Switch
2. Motor Unit
3. Locking Clips
4. Dirt/Water Tank
5. Vacuum Function Hose Port
6. Caster Wheels
7. Blower Function Hose Port
8. Power Cord
9. Onboard storage docks
ACCESSORIES:
10. Ultra-durable Flexi-Hose
11. Hose Handle With Variable
Airflow Control
12. 2-Piece Extension Wand
13. Floor Nozzle
14. Wet Floor Nozzle Attachment
15. Dry Floor Nozzle Attachment
16. Washable & Reusable
Microparticle Filter
17. Combination Crevice/
Upholstery Tool
16
1
2
10
11
3
5
12
6
13
4
7
8
9
9
9

4
ASSEMBLY INSTRUCTIONS:
Tools needed: Philips Screwdriver
1. Remove unit from packaging
2. Remove attachments from their packaging
3. Some of the packaging poses a choking risk to small children. Dispose of the
packaging responsibly. Please recycle all paper and plastic packaging
4. Before using for the first time check that all attachments listed are included. If
the unit is incomplete, return to the retailer immediately. Take entire unit,
packaging and proof of purchase to the store where your purchase was made
5. Attach the Wheel Housings and
secure with the supplied screws:
6. Completely insert the Caster
Wheels (6) into the holes as shown:
OPERATION
Only operate your Bennett Read Tough 18 in accordance with the instruction manual. Failure
to follow these instructions will result in decreased cleaning performance and may invalidate
your guarantee.
DRY VACUUMING:
Your Bennett Read Tough 18 Vacuum is perfect for vacuuming carpets, tiles, mattresses, upholstery,
curtains and car upholstery.
Setting up your Bennett Read Tough 18 for dry vacuuming:
1. Remove the Motor Unit (2) from the Dirt/Water Tank (4) by pulling the Locking Clips (3) outwards

5
2. Check that the Microparticle Filter (16) is securely installed in place as shown below:
4. Insert the Flexi-Hose (10) into the Vacuum
Function Hose Port (5) and turn clockwise to
lock in place as shown below:
3. Replace the Motor Unit and push the Locking
Clips inwards to lock closed as shown
below:
8. Attach the Floor Nozzle to the end of the
Extension Wand as shown below:
6. Attach the 2-Piece Extension Wand (12) to
the Flexi-Hose Handle (11) as shown below:
7. Attach the Dry Floor Nozzle Attachment (15)
to the Floor Nozzle (13) as shown below:
5. Join the 2-Piece Extension Wand (12)
together as shown below:

6
WET VACUUMING:
Your Bennett Read Tough 18 can also suck up liquids* in and around your home.
Please note that the Bennett Read Tough 18 is NOT a carpet deep cleaner. Carpet deep cleaning
should be done with a specialised deep cleaner such as the Bennett Read ONE.
Setting up your Bennett Read Tough 18 for wet vacuuming:
TIP:
To firmly attach the Extension
Wand and accessories together,
give a slight twist once joined.
9. Alternatively, when dry vacuuming,
attach the Combination
Crevice/Upholstery Tool (17) to suit
your cleaning needs:
IMPORTANT: The Microparticle Filter MUST be removed before
vacuuming any liquids
1. Remove the Motor Unit (2) from the
Dirt/Water Tank (4) as shown below:
2. Remove the Microparticle Filter (16) from the
Dirt/Water Tank as shown below:
10. Plug the Power Cord (8) into a wall socket
11. Switch your Tough 18 on using the Power Switch (1)
12. Vacuum in different directions across your surfaces for best results
After each cleaning session it is advisable that the Microparticle Filter (16) be washed, thoroughly
rinsed and allowed to dry completely before storing.

7
BLOWER FUNCTION:
Your Tough 18 has an additional function that allows you to blow away leaves and grass that
collect on your covered patio areas, or sawdust in home workshops. Simply plug in and blow the
dirt away.
Setting up your Bennett Read Tough 18 to use the blower function:
1. Remove the Motor Unit (2) from the
Dirt/Water Tank (4) by pulling the Locking
Clips (3) outwards
2. Ensure that the Microparticle Filter (16) is
securely installed in place (see page 4 & 5
for Dry Vacuuming)
3. Replace the Motor Unit and secure the
Locking Clips
4. Insert the small end (opposite end to handle)
of the Flexi-Hose (10) into Blower Function
Hose Port (7), turn clockwise to lock in place
7. Plug the Power Cable (8) into a wall socket
8. Switch your Tough 18 on using the Power Switch (1)
9. Vacuum the wet spill / liquid* from surface using a pulling action (squeegee blade at front)
10. When you are done, disconnect the Flexi-Hose (10) from the Motor Unit (2) by grasping the
end of the hose nearest the Hose Port (5), turning it anticlockwise and then pulling the hose
outward
11. Take the Dirt/Water Tank (4) to a sink or disposal area
12. Pull the Locking Clips (3) outwards to unlock the Dirt/Water Tank
13. Lift the Motor Unit (2) from the Dirt/Water Tank and place it carefully on the ground
14. Carefully pour out the liquid from the Dirt/Water Tank
15. Rinse the Dirt/Water Tank under running water and dry it completely
* WARNING: Do not vacuum up boiling hot, flammable or combustible liquids
* Your Tough 18 is equipped with a float valve located at the bottom of the Motor Unit which will
partially shut off the suction as soon as the tank reaches capacity. Immediately switch off the
machine and empty the tank before continuing.
3. Replace the Motor Unit (2) and secure the Locking Clips (3) in place
4. Insert the Flexi-Hose (10) into the Vacuum Function Hose Port (5) and turn clockwise to lock in
place
5. Attach the Wet Floor Nozzle Attachment (14)
to the Floor Nozzle (13) as shown below:
6. Attach the Floor Nozzle to the Extension
Wand (12):
4
Squeegee blade at front

8
MAINTENANCE AND CARE
EMPTYING THE DIRT TANK:
1. Disconnect the Flexi-Hose (10) from the Motor Unit (2) by grasping the end of the hose
nearest the Hose Port (5), turning it anticlockwise and then pulling the hose outward
2. Take the unit to a disposal area
3. Lift the locking clips (3) to unlock the Dirt/Water Tank
4. Lift the Motor Unit (2) from the Dirt/Water Tank and place it carefully on ground
5. Lift the Dirt/Water Tank and empty contents into the disposal area
6. Rinse the Dirt/Water Tank under running water and dry it completely
CLEANING THE FILTER:
IMPORTANT: TO ENSURE OPTIMUM PERFORMANCE AND TO PREVENT DAMAGE TO
THE MOTOR, THE MICROPARTICLE FILTER MUST BE INSPECTED AND CLEANED WEEKLY
4. Wash the Microparticle Filter in warm water with a mild detergent
5. Allow the Microparticle Filter to air dry COMPLETELY before reinstalling it into the machine
Replacement Microparticle Filters are available from major retail outlets or at www.tevo.co.za
WARNING: NEVER OPERATE YOUR TOUGH 18 WITH A WET OR DAMP FILTER.
5. Attach the 2-Piece Extension Wand (12) to the Flexi-Hose Handle (11) (optional)
6. Plug the Power Cord (8) into a wall socket
7. Switch your Tough 18 on using the Power Switch (1)
8. Blow away leaves, sawdust or any light debris by aiming the Flexi-Hose Handle or Extension
Wand
3. Remove the Microparticle Filter as shown
below:
2. Loosen the Microparticle Filter (16) by
turning the Locking Nut anticlockwise:
1. Remove the Motor Unit (2) from the Dirt/Water Tank (4) as shown below:

9
TROUBLESHOOTING
TECHNICAL SPECIFICATIONS:
Nominal voltage: 220-240 V AC
Nominal frequency: 50/60 Hz
Power Output : 800 - 1000W
Dirt Tank Capacity : 18 Litres
Model number: YLW78
Other maintenance or service not included in the manual should be performed by
an authorized Tevo service representative.
For any questions or concerns, contact customer care listed on page 8.
Machine not
switching on
PROBLEM POSSIBLE CAUSES REMEDIES
1. Power cord not firmly plugged in
or not switched on at wall socket
1. Check electrical plug
Weak suction
power
1. Microparticle Filter dirty or
clogged
1. Remove and clean
Microparticle Filter
as explained on page
8. IT IS IMPORTANT
TO CHECK AND CLEAN
THE FILTER REGULARLY
2. Remove Flexi-Hose,
nozzle and extension
pipes.
Clean and check for
any obstructions
Visible dust
escaping from
the machine
while vacuuming
1. Microparticle Filter not installed
2. Microparticle Filter dirty
1. Check Microparticle
Filter, situated
underneath the
Motor Unit
2. Clean Microparticle
Filter as explained on
page 8
2. Obstruction in Flexi-Hose,
vacuum nozzle or extension
pipes
Machine switches
off during
operation
(Thermal Cut-off
Switch)
1. Filters dirty or clogged, or the
Dirt/Water Tank is full
1. Clean or replace all
filters as explained in
this User Guide
2. Check and clean the
Flexi-Hose and the
extension tube
2. Obstruction in the Flexi-Hose or in
the extension tube
The machine will only switch on after it has cooled down
sufficiently. Permanent damage will be caused to your machine
if you continue to use it without addressing the root cause of the
overheating as explained above

10
CONSUMER GUARANTEE
Your BENNETT READ TOUGH 18 is guaranteed against manufacture faults
for a period of 1 year. If you register your guarantee online at www.tevo.co.za
within 14 days of purchase, then your guarantee will be extended to 2 years.
Tevo undertakes to repair or replace this product at no charge if found to be
defective due to a manufacturing fault during the guarantee period. This
guarantee excludes damage caused by misuse, neglect, shipping accident,
commercial use, incorrect installation, or unauthorized repair. Tevo is not
liable for incidental or consequential damages of any nature associated with
the use of this product. Tevo’s liability will not exceed the purchase price of
this product.
PLEASE KEEP YOUR RECEIPT TO VERIFY YOUR GUARANTEE.
This guarantee applies to product used for personal or domestic use only, and
specifically excludes any malfunction or defect arising from commercial use.
Guarantee and Service enquiries can be made by contacting:
Tevo (Pty) Ltd
Johannesburg [phone]
Durban [phone]
Cape Town [phone]/9
Customer Service Help Line: 0861 77 88 88
www.tevo.co.za

WET-DRY-BLOW VACUUM SYSTEM
18
®
PLEASE RECYCLE