Better Bathrooms BeBa 28529 User manual

Outdoor Shower Matt Black with Wood Effect Base
Please note: Image is for illustrative purposes only and may differ slightly to the
actual product
·Tools required
·We always recommend using professional
·tradespeople to install your product
V1_08.04.22
Congratulations on your purchase
·Multi person assembly
BeBa_28529

2
And welcome to our growing gang of savvy shoppers
We're on a mission to bring you extraordinary bathroom products, for less. From modern
to traditional style ceramics, plus the gorgeous fixtures, fittings and furniture to match. So,
you can fall in love with your space every single day .
As one of the UK's largest independent bathroom stores, we've received countless
awards; including the National Business Awards UK, the Digital Entrepreneur Awards and
being placed on The Sunday Times Fast Track 100.
We hope your new product goes above and beyond your expectations. However, should
any problems occur, please:
log in to your account and contact our customer services team via your self-serve
portal – betterbathrooms.com/CustomerAccount/Login
·
·
contact us via betterbathrooms.com/content/contact-us·
Important information
Please read these instructions thoroughly and retain for future reference
Minimum Working Pressure 1 bar
Maximum Working Pressure 3 bar
Pressure MUST be balanced
Hot supply MUST be connected to the left-hand inlet of the mixer
All installation work must be carried out to c omply with:
The Water Supply (Water Fittings) Regulations and Water Supply (Water Fittings)
(Scotland) Byelaws
The system must be thoroughly flushed prior to installation
Product must be checked for damage prior to installation
Always check the installation area before drilling for pipes and cables
Congratulations on your purchase

Contents
·/ Diagrams--------------------------------------------------4Parts
·----------------------------------------------------5Tools required
·Using---------------------------------------------------------------9
·-------------------------------------------------9Troubleshooting
·----------------------------------------------------------10Cleaning
3
·--------------------------------------------------------5Installation

4
Parts / Diagrams
Please note that Parts are for illustrative purposes only and may differ slightly to
the actual product
1. Left side frame
2. Base
3. Shower head
4. Connector x 2
5. Mechanical cartridge
6. Nut
7. Cover
8. Handle
9. Screw of overhead shower x 10
10. Top cover of overhead shower
11. Connector screw x 8
12. Right side frame
13. Clamp
14. Base screw x 8
15. Water-in hose x 2
16. Hose connector x 2
17.
G1/2 adapter x 2

5
Tools required
Spanner
Silicone
Drill and drill bit
Spirit Level
Pencil
Tape Measure
Hammer
Screwdriver
Installation
Prepare the water supply pipes to feed the shower with hot on the left and cold on the
right.
Hex wrench 6mm
Use the screwdriver to unscrew the screws
at the top of overhead shower and take out
the top cover.

6
Take out the connectors at both ends.
Fix one connector onto the left side frame and
tighten with 4pcs screws.
Fix another connector onto the right side frame
and tighten with 4pcs screws.

7
Install the overhead shower and tighten with 4pcs
screws at each end.
Pull out the pipe from left side frame, get 1pc clamp
and fix the pipe to the connector on shower head by
screwdriver.
A

8
Fix the top cover onto overhead shower, put 1pc screw
at each end and tighten by screwdriver.
Put the frame onto the base, then tighten with 4 screws
at each side.

9
Connect the water supply pipe to the adapter and tighten
with spanner.
Installation is then complete. Turn on the water supply
and check for leaks.
Using
To control the temperature, turn the temperature control handle until the desired
temperature is reached.
Troubleshooting
Water dripping after being turned off
1. Does the water stop dripping after a period of time, if so this is normal as the water
within the unit needs to drain away, so some dripping may occur.
2. Does the dripping continue, if so the flow control valve for the function that is
dripping, will need to be replaced.
To avoid freezing in winter, it's suggested to keep the shower tower in door.
For the least, unscrew the water supply pipe and turn on the mixer, let the water inside
the pipe flow out. After the inner water all come out, turn off the mixer.

10
Cleaning
To maintain the surface of your product, wipe with a clean damp cloth and wipe dry , do
not use any abrasive cleaning agents or materials .
It is recommended to wipe and dry on a regular basis.