Better Bathrooms 10034 User manual

3
5
2
1
toilet seat
⑤
PP washer
②
screw
④
③
①nut hinge
4
Installation manual for toilet seat and cover
This instruction is used on code:10034
1
Thank you for using our products. In order to install our product, please follow the instructions
below and check all components are present before commencing. Prepare all the needed tools
and materials for installation.
1. Fit the screw into the hinge
Note: Seat may require installation before fitting of the pan, please check!!!

For further details or advise call Customer Services on 0844 484 778
W.C bowl
2
2. Align the screws with the holes on the pan
Once located make any necessary adjustments
Fit the washer and nut and secure into position
Importance:
* After installation ensure the fixings are fully secured
* No abrasive cleaning agents or materials can be used, a soft clean cloth should be used
* During use do not push the seat down, as this will cause damageto the soft close mechanism